Cannot change a custom section

Similar Questions

• Cannot change "available UOM" section when material packaging Spec is in status approved in v6.2?

  I was able to edit s "available UOM" article when the packaging material specifications are approved in v6.1.1.x status.

  After upgrading the PLM application to v6.2, cannot change "available UOM" section when specifying is in status approved in v6.2?

  FYI, I have [AVAILABLE_UOM_ADMIN] and [SUPER_DATA_ADMIN] roles to my account.

  Please help me to solve this problem in v6.2.

  Thank you

  Nefertari

  for newly created, it won't cause any problems if you change the unit of MEASURE. However, for plug was consumed by other specifications, for example, a specification of packaging with all available unit of MEASURE and unit of MEASURE mass, kg I a g, mg, then I have a trade specification which uses this packaging such as 10g. If availabe UOM is allowed to change and user gets updated to remove g, then according to the specifications of the trade, you will see a warning because 'g' is therefore more a unit of MEASURE valid for this packaging (only when the configuration that I mentioned earlier is enabled). That's why we make more stringent for not be able to change the specifications of packaging has been consumed.

  However, if your environment has above configuration, so this shouldn't affect your use as unit of MEASURE is to basic UOM category should be available to use.

  I hope this helps.

  Thank you

  Jessie

• Print questions after the custom section changes using a printed code

  Hello

  We have problems with the order of the custom section. Please find below bottom

  1. we have a custom code to print sections customized specification associated with the material specifications

  2 this custom code developed 2.5 years ago and absolutely perfect job

  3. this custom code actually built XML sections customized the associated specification which is transformed into PDF using XSLT by extending the print features.

  Recently, we changed the order custom sections appear in hardware specifications. Once the order gets modified with the help of Admin-> Data-> custom section order Custom. New order got reflected in all the technical features without any problem

  But the custom sections do not print in the same order

  When we studied, we found the following

  1. printing order is fine when using the default print template provided by oracle

  2. printing order is not very well when we use our custom print template that uses our custom code developed 2.5 years back

  When we have investigated further, we discovered that any new record is created once the order has changed to print very well in the same order using our custom code

  But the old specifications that were created before the implementation of the custom section control do not print in the same order

  Debug us the solution, with the old card and discovered that code is return data in the old order and not in the order indicated in the specification

  We tried all the properties we could and noting works as expected for the old specifications and new specifications get the order appropriate under the new defined order

  None of the sub properties get the data in the correct order in the old specifications

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedModifiableValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.ModifiableValues;

  Can you please let us know if this is a bug in the product? or is it possible that we can do our custom code works for the old specifications?

  Can you also let us know which table stores information about order of custom hardware specifications section?

  Thank you

  Mani

  Sounds like the same issue post to https://community.oracle.com/thread/3804143.

  Thank you

  Pourbaix

• Cannot change the appearance of custom settings window

  Hello

  In the attached vi, I changed a few custom settings in the appearance window category vi properties box. What should I do to change the settings back to the 'top-level Application window"? Simply by clicking on the respective radio button doesn't seem to work. Even after registration, the proposed closure and reload the project and vi, the setting is always "personalized." I'm using LabVIEW 2011.

  Thanks for your help.

  Peter

  Hello Peter,.

  I opened your VI on my computer, and of course, I see the same behavior not being able to return to the "the top-level application window.

  If you create a new VI and then change the Custom window properties in the properties of VI, are you able to reproduce the same question? If this isn't the case, I would try to copy and paste all of the current code of the VI to the new and see if you still have the same results.

  The only solution is to put the settings customized to their original settings in order to reproduce the parameters of the top-level window.

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• Cannot change the rip options in Windows Media Player

  Original title: Windows Media Player

  I can't see or change the location of the files of torn pieces. I can't change the rip options.  It won't let me change, but when I hit it Ok replys "changes were made not."

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Assuming you are using Windows 7, I would recommend that you follow the steps in these links that talk of a similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/cannot-rip-CD-cannot-change-album-info/07fb8c99-9a7b-4456-9633-1f487d5f7a42
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/cannot-change-rip-settings-on-Windows-Media-Player/dac9c339-1e82-4F10-A30E-0d3798c5e3d0

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Movie Maker - cannot change the length of each clip.

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• The following error is reported by the repository: cannot change demand. Repository is full. Too much metadata fields

  Dear all,

  Im getting "the following error is reported by the repository: cannot change demand." Repository is full. Too much metadata fields when I try to create, delete, and add more fields to an application.

  Please help me where to change configurations to create an application more in IPM.

  Thank you

  Jeff albert

  Hello

  Are you seriously having over 500 DEFINITIONS of FIELD Application of IPM? If so,.

  What you can do

  In the config.cfg to UCM (DomainHome/ucm/cs/config folder) can you add this in the general section:

  IpmMaxMetadataFields = 1000 (or any number you want to increase the)

  limit to)

  This will overrride the default max value in IPM.

  After this change, restart the managed server UCM and IPM.

  Please let me know the result.

  Note: I have a few performance problem in the future.

• Extended attributes / Custom Sections and features multilingual

  As we look to move the platform of analytical properties deprecated to recreate in the ext attributes / custom sections, we do not see the possibility of creating these for multilingual data entry.  Analytical properties allow multilingual data entry.  If the plan is to remove this feature of Agile in the future versions we will not be able to upgrade until this feature is present.  Prevents us today to use EA / CS for this data in the form of text must be in the local language for sellers.  Is there a plan to make these multilingual data, or did I miss a feature that I have not yet found?  THX

  Custom data does not support values multilingual for EA/CS, qualitative elements and lines/columns names, but we do not offer an extended attribute free-content multilingual.  For the capture of free text data cannot contain more than one language at a time.  So if you rely on a free translatable analytical property you will not be able to provide the same functionality with extended attributes.  We'll add a text attribute free multilingual in our next major release so you will have to wait the release to completely migrate your analytical properties.

• Cannot change the workflow in 5.1 VCO

  Hello

  I have VCO device 5.1.2 race. I'm sure that I have it configured correctly as used to work once the installation program.
  The Group Admin VCO is set to SYSTEM_DOMAIN_administrators_ and my account is part of this group.
  When I connect VCO customer I have no problem creating folders and new workflow (or duplicate).
  However, I seem to not be able to modify the workflow. When I go in the schema tab I can't drag items of workflow to him. As a fact, I do not see the items appear on the left side at all. Any ideas what could be the problem?

  Cannot change at all. The license is OK. I solved the problem by updating 5.1.2. I was running 5.1.1 5.1.2 not reported by mistake.

• Cannot change the CC plan

  Hello

  We license team CC and unique apps: 2xPS, 2xAi, 1xId and 1xLr (but not CC - 5, upgrade to CC).

  I try to change from single-app in plan membership plan complete but still message: 'we cannot change your plans at this time... ". "But Adobe systems is in charge my credit card for 1 Eur for each tent.

  Can you help me solve this problem? Thank you in advance.

  

  Hi Vytaute,

  Please contact support:

  Contact the customer service

  Concerning

  Megha Rawat

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!