Print questions after the custom section changes using a printed code

Similar Questions

• Media Player Library question after the drive letters changed - Solution found

  I wanted to share a solution to a problem that I found and after searching on Google, I found no answer.  But after some perseverance I managed to fix it myself.

  I installed Win 7 & got to read all of my media files in WMP12, no problem.  However, I changed the drive letters on drives where my video, music and photo files were required, then lost all the details of the library.

  I thought I could rebuild the media player library by updating the files included in the relevant libraries, but it did not work.  I tried various other corrections posted (mainly by deleting all files in WMP library so he could rebuild), but without success.  What I found worked was:

  Close WMP and Media Center
  Remove all the libraries (music, pictures, video) file paths, so no files have been included.
  Run Regedit
  Search for all references to the old drive letter paths & modify registry data show new car path (for example, my music was on E:\My music, after assigning new drive letter, as it's on the music of H:\My, so I searched for all instances of music E:\My replace E) : by: :)
  Restarted
  A run WMP
  Added the new path of the folder in the library
  Hey presto, he began to rebuild the music library!

  Hope this helps someone else that I spent several hours of frustration of trying to understand this one!

  Thank you. A few trips to REGEDIT and I finally found him. There were two places «...» Of the Shell folders' and '... User Shell Folders ". After making sure that both had updated letters my multimedia files are fluid in. Thanks again!

• The custom section NRT denorm dependencies

  When the PLM framework decides a personalized section has denorm treatment, it inserts a record into the DENORM_CS_REQUEST NRT will address when it is properly configured. When you use a custom FlexSync importer that creates or updates the custom sections, custom sections are not be denormalized. It is possible that the original developer of this customization by using pure SQL insert/update the section custom or using a part of the PLM environment that does not support the DENORM_CS_REQUEST. Y at - it custom code solutions, a recommended approach to support the DENORM_CS_REQUESTs (for example, by using the ExtendedAttributeSectionInstanceService or SpecService for the updates, insert manually a DENORM_CS_REQUEST, etc.)?

  How you did implement your importer of FlexSync? The default implementation of the import of post handler calls SpecService. Save. At the end of the save method, PostSaveSpecPlugin is triggered. So the question is whether SpecService. Save is called in your application?

• I met an Execption Time out ([HttpException (0x80004005): TimeOut]) when I try to export the custom section.

  Can I export other configuration item. but I met an Execption Time out ([HttpException (0x80004005): TimeOut]) when I try to export the custom section.

  How to get the cause root? How to solve this problem.

  Thank you

  Hello Terry,

  Please try to add the following in the section in the Web\Portal\web.config

  You can extend the time-out value to avoid the error when the data in the custom section are too big and too long to load.

  I hope this helps.

  Thank you

  Jessie

• A few questions after the downgrade of Win 7 on Satellite U940 - 11L

  Hello

  friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.

  Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.

  Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.

  Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).

  Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.

  Please if you have any suggestions we would greatly appriciate it.

  On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.

  Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.

  Thank you very much for your time and your suggestions!

  Tony

  With regard to the question of the touchpad.
  To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.

  I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers

  With regard to the problem of BT.
  The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT!

• stupid question on the custom java client

  Hello
  
  I came through the api and the user guide and found no answer to my question - if there is a way of
  connect a java client customized without having all this stuff of Cache coherence from the customer site? I mean the following:
  
  If you write a client that makes CacheFactory.getCache ("VirtualCache") as described in
  user documents, then it looks like you automatically start a node of coherence on the customer site
  
  I tried a few example to check that a "customer" who is CacheFactory.getCache ("VirtualCache") and
  com.tangosol.net.DefaultCacheServer executed separately. They share a configuration and function in replication mode:
  
  (1) customer makes data in cache and ends - DefaultCacheServer still has that data
  (2) customer is running again and waits, then puts an end to DefaultCacheServer - client keeps data
  (3) DefaultCacheServer started and customer cancels - DefaultCacheServer keeps data
  
  So it seems that customer fully plays a role of node replication consistency. How to avoid this? Suppose I want
  Just plug my client node consistency running on the remote host.
  
  Published by: user10381422 on 27.10.2008 09:01

  Hello

  You are right - consistency, by default, is not a concept of clients and servers, a few knots. It works in peer-to-peer mode of mesh, which means that all the nodes that join the cluster fully participates in all cluster, including cluster services cached. However, there are situations this behavior is not desirable:

  1. when clients are transient in nature (desktop applications that come and go, for example), because they trigger the replication of data unnecessary and/or repartitioning when they join both when they leave the group.

  2. in Wan environments, network latency will cause consistency consider remote nodes does not and kicked out of the bunch, who has once again as a result unnecessary replication and/or data repartitioning and increases network traffic.

  To deal with situations like these, coherence provides two features that can help you achieve what you're looking for:

  1. local storage

  By default, all nodes are considered as "storage nodes", which means that they fully participate in the cluster and are responsible for their share of the data storage. However, it is possible to change this by using '-Dtangosol.coherence.distributed.localstorage = false' system property. However, this works for partitioned/distributed caches and not replicated caches, so it wouldn't be useful in your case.

  2. extend * TCP

  Extend * TCP allows you to get what you want even with replicated caches, because it separates completely the customers of the bunch. You can find detailed information on how to configure Extend * TCP in a Guide of the user to http://wiki.tangosol.com/display/COH34UG/Coherence+Extend, but the basic idea is that you configure one or more servers within the cluster proxy to accept client connections and configure clients to connect to these proxy servers. All communications between the client and the server occurs over the reliable TCP/IP connection, and the client never really joined the cluster.

  The most beautiful thing is that all this is done by configuration, which means that your client code will not have to change a little bit.

  HTH,

  ALEKS

• Turning to black screen after the value time/RAM used FireFox

  Hello

  My question is for the graphics. It lasts for several months now and he came to a point where it starts eating away at me.

  I installed recently (within 6 months) 16 GB of RAM and a new extra GPU. I upgraded to an ATI Radeon HD 5750 to a Gigabyte Radeon R9 x 270. I never had this problem with my 5750 card, so that initially led me to believe it was a card problem, until I discovered that my problem seems to be ONLY with FireFox.

  Now to the question: arriving to 2.8 GB + of memory used (according to Task Manager), FireFox flashes for a brief moment and to scroll the screen or between tabs, becomes completely black, forcing me to re - load the browser. Now the first question of the use of FireFox, so initially, amount of RAM is crazy, and I tried to lower the settings by disabling extensions, all sorts of things and the fulfillment of the only thing that is extend the time before flash made his boring appearance.

  The screen flashes problem seems to be quite something else. I tried to upgrade to the latest version of FireFox, run a new installation of FireFox, update my graphic drivers their latest versions, just about everything I can think of, and nothing seems to fix. What seems to be the problem here? I would be very happy all feedback and better understand how I can solve this problem outside hard using a different web browser.

  Hardware specifications:
  Motherboard ASUS P6X58D
  Intel Core i7 930 @2. 8 GHz processor
  22 GB of total RAM (3 branches of 2 and 2 strips of 8)
  Gigabyte Radeon R9 270 x GPU
  Brand/model unknown 850W of power (honestly, I'm just too lazy to remove the top of my tower which is packed in a locked drawer to figure out the make and model at display time)

  Running FireFox in safe mode seems to have solved or at least slow the excessive RAM issue however FireFox has now terrible performance much earlier. Adding constantly freezes and scripts constantly crashing, it would seem that addons and extensions that I ran helped to solve these issues.

  What I do now is to reload firefox standard and turn my extensions one by one to see which seems to be the cause of most of the points in the use of the ram.

  AdBlock Plus seems to so far be keep stable FireFox without problem. Going to turn in my next toolbar. Will edit this post more information after having observed the behavior of FireFox.

  Edit: The reason to believe it's my toolbar like with AdBlock plus, FireFox was still around or less 1 GB to use physical RAM. After the reactivation of my toolbar, I jumped up to 2 GB. Contact the developer of the toolbar soon.

• Questions after the BIOS updates and driver - place 11 pro

  Hi all

  I am owner of a place of reference dell 11 7140 model 10 64-bit windows running and about 5 days ago I installed the latest drivers and the latest version of the BIOS using the automatic detection of the dell support page www.dell.com/.../drivers printer driver

  Since then, I met the two following questions:

  1: the automatic detection of the dell driver no longer works

  2: the system does not detect when a headset is connected, the audio always comes out the speakers Tablet - I reinstalled the latest drivers, but made no difference

  I wonder if anyone else has experienced those problems and what measures have you taken to solve problems.

  Thank you

  I managed to solve the problem with the audio: it was caused by an incorrect realtek driver installatiion, for some reason any 'Realtek Audio Manager' was not loaded when you start and that's why the system doesn't detect the status of the audio input jack.

  Always have the question of the automatic recognition of the driver, but at least I have a tablet of new work!

• having suddenly emits turn off my computer as well as the questions after the connection

  It started randomly a few days ago.

  When I stopped everything simply is not extinguished. It will let 10-30 minutes and just restart and brings me back to connect. After the connection of that my computer strikes a blackscreen im could not use the mouse and enter the Manager tasks, but nothing else, after a minute or two my bottom and loading of the task bar and I can use my computer normally.
  what I can tell you is...
  I started in safe mode and this didn't happen.
  I ran msconfig and disabled all non-microsoft processes and it is happened
  I opened the event viewer and there seems to be a large NUMBER of critical errors from the night, I first shut down my computer and contained errors (25/08/2012 around 11:30)
  looks like this https://www.dropbox.com/s/1rkitvaaq69rlkq/Lucas-pc%20events.evtx (tell me if you can show that)
  Also I tried to restore my computer to the 24, but he won't do it for some reason any.
  Im running windows 7 64 bit edition Home premium
  16 GB of ram
  Intel 3, 5 GHz 17-2700 k
  2 x radeon hd 6870 in crossfire

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try turning off the auto reboot on the computer.

  a. right click on computer.
  b. click Properties.
  (c) advanced system settings.
  d. Advanced tab.
  e. startup and recovery settings.
  f. uncheck automatically restart.

   

  Method 2:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 4: as make that you followed the exact steps from the link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• How can I get my old mozilla back window after the upgrade automatically changed without asking me?

  What I would like is the window of the screen/boot I've had in prior to this new improved window version. The window that appears when you start mozilla. I didn't want to not update, don't have requested by mozilla and I was perfectly happy with mozilla having this nice orange tab where I coul find everything I needed, also as the organizer of better bookmarks with the old version.

  Thanks, hopefully I can get it back

  SpiritHawk

  Hello this see the help article How to make the new Firefox looks like the old Firefox

  See also:

  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox
  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/what-happened-to-the-add-on-bar
  • Tabs on bottom: https://addons.mozilla.org/firefox/addon/tabs-on-bottom/
  • The Bar of the (restored) Addon: https://addons.mozilla.org/firefox/addon/the-addon-bar/

• Display disappears after the period of non-use. The display is fine (a plasma), the computer is running. But no display and must restart.

  Hi-for no apparent reason, the computer has developed the following: after a period of non-use (always on computer), when I re - turn on the monitor I get a black screen.  Using the mouse, knocking every possible key produces no image on the monitor.  Meanwhile, the hard drive is very hard.  Only the appeal should restart.  Any ideas?

  As I said it's a guess.

  Let us know if find you the solution.

• A lot of questions after the chkdsk in safe mode error.

  I did chkdsk in safe mode and for some reason now I can't connect to the internet, it takes 20/25 minutes at the start of my PC, cannot start applications like Itunes, microsoft word, outlook.

  I have Norton installed by comcast and it is not yet update of virus definitions more.
  Almost everything that takes very long so that it starts. If I could to restore to an earlier date, as I could without doubt it works again, but after more than four hours after the start of the restoration program, he returns with the error 0 x 80070570.
  I have tried many suggestions from many sites, but nothing helped.
  I am running Vista on a HP Pavilion m3830f. What has gone wrong? Can someone help me please?

  Hello

  You are able to start your computer in normal mode?

  Method 1:

  How to resolve performance issues during startup in Windows Vista

  http://support.Microsoft.com/kb/950684

  Method 2:

  for the problem with the system restore, I suggest you perform system restore in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 3:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Method 4:

  I suggest you to contact Norton support and check.

  https://www-secure.Symantec.com/Norton-support/JSP/contact/contact.jsp?LG=English&CT=United+States&product=home&version=1&PVID=f-home

• Question after the discount.

  I went thro the "re-fresh your PC"... went well... an icon appears on desktop, after the process of list applications deleted... down in the right hand corner was a menu saying get the program back pushetc... I did and Adobe came back, BUT the menu has disappeared and I can't not all microsofts help return etc.

  Hi Sally,

  Welcome to the Microsoft Community Forum.

  You can refer as a result of information tro understand the difference between discount and Reset and all things can be saved.

  By refreshing the PC:

  The applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  See the article for more information:

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  What are the apps are missing, you must reinstall them.

  Do not hesitate to write us if you have any questions. We will be happy to help you.

• Redirecting to site after the widget is signed using REST API

  Hello

  I would basically users to aim at a widget EchoSign then back to our external site after the signing. I tried to use this:

  https://secure.echosign.com/public/docs/restapi/v2#resource_widgets

  to generate a widget with a redirect url, but I can't specify a widget I have already created. Instead, I'd give it two fields:

  'formFieldLayerTemplates' => array(
         'libraryDocumentId' =>MY_WIDGET_ID
  ),
  'fileInfos' => array(
         'documentURL' => array(
              'url' => 'PATH_TO_ORIGINAL_WIDGET PDF/test.pdf',
                   'name' => 'test.pdf'
         ),
  ),
  

  I use PHP fwiw.

  The widget looks ok for the first few pages, and then all the fields begin to be extinguished by a page. Looks like there should be an easy way to tell just the API to use the widget that I have already created the basis for all this.

  Is this possible?

  After the widget is signed, but techinically it isn't over until the user confirms their email also happens the redirection. Is it possible to set up the redirection at this time?

  Thank you!

  Hi James,

  Please contact support about your query. They should be able to help you with this.

  Thank you

  Jat

• Flash plays don't pitch on the html page after the model is changed

  Hello

  Can anyone help. If I change anything on a model, none of the files .swf on pages based on this template will work when you preview in the browser.

  I use DW CS3.

  Someone at - it ideas

  Nice day

  This problem can be considered a limitation to a certain point because Dreamweaver did not have the "auto-Update" capacity, although it wasn't really the best practice to include Flash content in a model DW.

  There is a workaround solution. You may need to change the template (.dwt) himself and work in Code view.

  • In Code view, use find and replace (Edition > find and replace) have so that it will be easier for you to find what you are looking for.
  • In the find and Replace window, choose current Document as the value for find in, the Source Code and as a Research.
  • In the search field, type--> 'src' (including apostrophes), and then click Next.
  • Once you have found 'src', pay attention to the simple quoted text next to it. The value in single quotes is the path where the Flash file is saved. try to remove the ... / if you happen to see. (do if the Flash file is located in the same folder where the HTML page that uses it is registered)
  • Use find and replace again, this time, try searching for 'movie' (including the single quotes). Again, you will see the text next to him who has the same value as what you are looking for before. Do the same thing, try to remove the ... /. (do if the Flash file is located in the same folder where the HTML page that uses it is registered)

  Save the DW template file and try to view the pages in the browser.

  I hope this helps.

  Kind regards

  Christine R.

  Adobe in North America support