Cannot change properties of the comments custom on a model of vapp in realization of Vcloud

Similar Questions

• Cannot change properties of the log events in the security policy for replace mode archive

  Hello

  We use windows server 2012 R2 Edition OS Server in my organization. We have newspapers of facility security events "archive newspapers when it is full" and he used to use 133 MB of available space. Recently, as the daily logs of the security being created 133 MB size, the local volume was full and I had to delete the old archives manually. Then, we decided to change the settings of the Archive to replace the events if necessary. But when I try to change it and click on apply, it does not seem to apply the changes, his new ghost "archive logs. Please help me out here. Also please ask me questions just in case I missed any important points to mention here. I am a newbie in this forum.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Tecra S5: Bios updated - cannot change page in the BIOS

  I have improved my Tecra S5 BIOS to version 2.0. But when I enter the BIOS, I can only change properties on the first page PGUP PGDN keys, for change of page does not work for me. Everyone knows the same behavior?

  There is a game of the bios supervisor password.
  Turn on the laptop with the INS key. Now you can enter the supervisor password, and you will get the full bios.
  You can change/clear the password and the policy settings using the password of Toshiba.

• Change properties on the fly pop-up

  Hi all

  I'm stuck with a problem.

  Description of what I have:

  I have a MainVI that calls a Subvi. The Subvi is dependent on the MainVI for some entries. In other words, it would give an error if I called one Subvi . In addition, there are a condition to reach the part of the code that runs the Subvi. In other words, the Subvi does not, as soon as I launch the MainVI

  Description of what I want to put in place:

  What I want to do is, I want a switch on the MainVI, such that, when I start it ON any time, I can SEE the Subvi popup (please not the Subvi should not run because it gave an error)

  and when I turn it any time, the popup Subvi should disappear.

  I'm having problems:

  1. I cannot change the properties of 'Appearance of the window' the Subvi as I need appear / hide according to the control of the switch.

  2. I tried to use the 'State' property, but that only works when the Subvi is executed. But I just want to see the Subvi, even before his execution

  Help, please!

  Here is an example.  The main feature is here.  You must decide how to spend the Subvi reference.  I put in a period and a universal joint for this example (seesaw for breaking the action "run Subvi" back to false, do not know why the extract makes this property node look funny).

  I'm guessing there are a few additional ways or considerations, but this example was the VI open and close the front panel without running the Sub.   You can then run the sub too.  Of course your VI will 'do' the Subvi another way.

  You can run the code snippet, but you will need the Subvi, so I have two attachments also.  In addition, change the directory to the path of Subvi.

  

  See the façade = True in the FP method. Opened.

  ***

  OK, the code snippet took my property to the Boolean value and he changed a reference, weird, but understandable.

• Cannot change network over the VPN connection components

  Hi all

  I set up a VPN in windows XP Service Pack 3 with all latest updates.  When I display the properties of the VPN connection, there is a tab labeled "Networking".  When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere."  I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.

  Can someone help me troubleshoot or identify what prevents me to change my network layout tab?  There is virtually no information on the internet addressing it.

  Thanks in advance!

  Hi Amish_Robot,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot change directories since the last update

  problem, the vulnerabilities of windows on my software now since the last update last night. any program, try to change directory and get an error code that the program ended unexpectedly.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  This is the recovery and repair of Vista Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• just download the software 23,00 year... converted from pdf to word... .i think cannot change or find the converted document

  just downloaded 23 - year 00. .have was pdf to word conv... cannot change or find

  in word

  Hi stephen32143298,

  To search for a file that you have converted to Word using ExportPDF, sign in to your account at https://cloud.acrobat.com/files. Find the file you want to edit, select it and click Download. The file will be downloaded to your computer (usually in the downloads folder), and then you can open and edit in Word.

  Best,

  Sara

• Cannot change fill in the cell

  Hello

  I know... sounds easy, but I'm stuck.

  Once I put the body tag, th, td to the padding of say 30 cell (which I have) I can't have a table at the breast to have its own fill parameters.  When I go into the properties of the table, it is said that the padding is 0, however, is not.  It adopts the filling of the PAGE/BODY, no matter what I put in the cell accessories.

  The only time wherever I have control over the inner padding a tabel/cell is when filling the page is 0.

  http://amsodconsulting.com/SiBeam/PSB.html

  Please view the source and tell me what I'm missing.

  Thank you!!!

  Esther

  The model underlying this page was not properly, you know?

  This do-

  Create a new page (basic HTML).

  Use the FILE | Save as template...

  Look at the code in the head region of the page, in particular the editable

  the region around the

• Cannot change or delete the account

  I need the clouds to the top, so I decided to use Dell Data Backup and Recovery. When installing, I typed my email address in evil. Now, I can't activate or delete the account. Even after uninstalling and re - install, my computer remains linked to an account that would never work, because he has a wrong email address and therefore cannot be activated. Dell technical support gave me a phone number to call (1-866-622-1947), but this number is only a recording saying that no one is available to take my call. There is nothing in the Help menu on how to delete an account. What am I supposed to do?

  I found that Dell is totally unable to diagnose or repair problems with the backup, I worked with them for more than a week on this subject.   The best bet is CLEVERBRIDGE that manages ecommerce your money because they don't know how to get Dell to answer or the other.

  The Dell support of front-line guys said to remove and reinstall the product reauthorize the prime key of course who has ZERO to do with permission of cloud stuff.

  CLEVERBRIDGE customer support is 1-866-522-6855

  They were also to make Dell but it does not appear that everyone at Dell know or care about what happens with the backup of cloud and it is sorely lacking of any opportunity to change, cancel, change, etc. one of the account settings.    This product does not seem to be really well thought out.

• Cannot change properties or labels for newly created. WAV files

  I used Audacity to scan a bunch of old videotapes (MS not taking care of the more manageable! tool with Vista, I used to use with XP...) -j' exported all albums/songs in WAV Format. I have them organized in folders in the Windows Explorer by artist, Album (subfolder) and the song, but does not know how to upgrade the album/artist/etc. info correctly in the properties so that WMP will recognize it. In Windows Explorer, if I click on properties none of the relevant artist/Album/etc. properties appear (and none of them - for example the attributes - are editable in any case), and in WMP11, if I click on Advanced Tag Editor none of the track news, artist Info, fields etc. can be changed (I can see them, they are just grayed out/unclickable). I checked the properties in Explorer to see if the files have been set to read-only, but they are not.

  This is normal - Explorer and WMP can edit WAV tags. This is because a very poor mark supported WAV format, see http://thewelltemperedcomputer.com/SW/WMP/WAV.htm for more information.

  If you want support for tagging, you will need to switch to another format, such as MP3 or WMA (possibly without loss).

  Tim Baets
  http://www.BM-productions.TK

• Cannot change properties or remove any wireless network

  Hi all

  I can't change the properties or delete any saved in my laptop wireless network. I get an error message:"Windows has encountered an error in the recording of the wireless profile. "Error: access denied".

  I use Windows 7 Professional, logged as administrator. I've updated wireless drivers, but that has not helped.

  Because of this problem, I can not connect to a wireless network, whose password has been changed. When you try to change the password through the andSharingCenter network-> manage wireless networks, I get the above error message. I also tried to delete the network but could not, that nothing is happening, there is no error message, but the network is not removed.

  Can anyone help please?

  Hello

  ·         Are computers on the environment?

  If you are on the environment, you can follow your own thread on TechNet.

  Otherwise, try the suggestions listed in the below given link.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e34c4690-4737-49bc-a06b-2a1f6711c7ae

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Changing properties of the file during import to Premiere Pro

  Hello

  Strange problem I encountered: images taken with my Canon 6 d fixed changes in 1920 x 1080 / 30 fps at 1080 x 720/25 fps when they are imported into Premiere Pro (CS6). My PP settings are: Digital SLR, 1080 p 30.  Can someone help me understand what is happening here I have triple checked the camera and PP. settings This problem is forcing me to produce videos SD that I shot in HD – a real frustration!  Thank you.

  Thanks for your reply, but I just found out that the mistake was made before importing files in Premiere Pro. Initially, I had these files stored in the Mac Photos and did not know that by dragging to the desktop would change the file properties. To keep the original properties, you must go to file > export > export original unmodified.

• Cannot change 'Opacity' of the Clip

  I have a strange problem with 11 PreE that I didn't have before. I am creating a video clip. I take four video clips, 4 minutes each, 1080 p, 24 fps shooting. They are just fundamentally different angles of the same singer in the video. I stack the clips on the other in the Prée 11. Then I cut the four clips stacked 4 to 5 slices of a second. This way I can defeat the opacity of the sections of the clips I don't want and just leave the clip I want with a full opacity. When you watch the video, the angles and the looks are changing. Who is?

  The problem I have is that the 'line of control opacity', the horizontal line that lies in the middle of each clip is not admissible. When I stoop to the level below, the video remains visible. When I try to lift it up, 'glue' at the lowest level, it remains visible on the monitor.

  Can anyone help me, or if you can think of a better way to accomplish what I try, please let me know.

  Thank you. Stan

  Stab

  What version of Premiere Elements you are using and on what computer operating system is running?

  In addition to the use of failure to stretch the video clip opacity for the clip opacity changes, you can change the opacity of the element in the Panel properties/opacity (versions 10 and earlier) or applied effects tab/Applied effects Palette/opacity Panel (versions 11, 12 and 13). Have you been there and done that and who does not work either?

  You can change what the band stretch video clip. Is it possible that you put something other than the opacity? Look to the right of the title of the video file on the timeline. It shows here 'opacity '?

  Please review and consider. I can provide screenshots of features if necessary.

  http://atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html

  http://atr935.blogspot.com/2014/03/PE-rubberband-options-detailed.html

  RTA

• Re: Portege M400 - cannot change anything in the Bios

  I need to device boot cd-rom 1-st.
  It has no operating system installed on my hard drive.

  I couldn't change my BIOS.
  I hold down the button Esc then F1.

  After I see the Bios screen, but I can't change anything.
  I can only escape without and with the changes?
  No element can be changed?

  Can someone help me?

  Hello

  You do not need to change the boot device in the BIOS.
  You can also set it in laptop power on.
  Press F12, immediately after that the laptop has been powered
  Then a start menu should appear.
  Here you must choose ODD as boot device and should confirm with the Enter key.

  That s it

• Cannot change anything in the settings of Restrictions

  I am the scene long distance technical support for iPad from my mother.  In his screen settings Restrictions, she can't shut down on one of the buttons and clicking on other sections does not allow/disallow changes screens.  Basically, it seems that the Restrictions screen is completely broken and does not accept any entries.

  She must type "Activate Restrictions" at the top of the screen and create a password first.