Cannot change the default e-mail program

Similar Questions

• Cannot set the default e-mail program

  I can't send a picture from Windows Live Gallery.

  He is told to do my e-mail default program, but it won't let me

  OT: lynda Laurent

  can you help me
  Thank you
  Lynda

  Hi Lynda,

  1. who is your provider of mail service?
  2 are you using any client e-mail like outlook or Windows live mail?

  If you use any email client, then I suggest you to try the steps from the following link to set the program as the default e-mail client.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows-8/choose-Programs-Windows-uses-default

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Setup Eudora as the default e-mail program

  Hello

  Operating system: Win7

  I have always (for the right reasons) sue Eudora as my main e-mail client.  Whenever I installed a Windows Update, Windows set Outlook as my client, but it has been noticed by Eudora which, early on, was told that he was no longer the default client.  I could easily change that by starting Eudora as an administrator and then clicking on the option to make it my default e-mail client.

  BUT from the windows of the last updated, it no longer works and Eudora told me that it was impossible to change the registry (even when starting as an administrator).

  I tried to restore Eudora as the default e-mail program by going to wut Start\Default program that eudora does not appear here and I can't change the (set on Outlook) to Eudora MAPI option because this option is greyed out...

  How can I restore Eudora as my default mail (mainly for the mailto protocol) client?

  I found myself a solution that may be useful to other people faced with the same or similar problems.

  1 each (major) Windows Update and for reasons known only to Microsoft, registry HKEY_LOCAL_MACHINE\SOFTWARE\Classes\mailto\shell\open\command key has been changed and gives the order to outlook... (even if it was for Eudora before the update).

  2 Eudora could not change this key (and restore the command again to Eudora.exe) even when run as administrator because this key is protected...  (I noticed that I couldn't change the key manually).

  3. However, when I gave permission to administrators to modify this key and restarted the computer, Eudora (run as root) could change the key which now reads: C:\PROGRA~2\Qualcomm\Eudora\Eudora.exe/m %1, which is what to do...

  So, problem solved, but why Microsoft protected this key during one if its last update remains a mystery.

• How to determine whether Outlook is the default e-mail program Windows 7

  There are a number of postings on Internet in the topic configure Outlook (I use Outlook 2013) as the default e-mail program. I can go into Control Panel, default programs, select Outlook, click on set this program as default and click OK. However, I don't see any indication that I've accomplished anything. How will I know that Outlook is my default mail program?

  Windows Explorer to open a folder that contains .jpg files.

  Right-click on one of them, then click on 'send '.

  Select "E-Mail" as a target. Windows will now open the default mail Manager.

• Cannot change the default mode in wscript

  In Windows 7, when I try to change the default mode of wscript, I get an error message. When I get home

  CScript //H:CScript

  the command line, I get

  CScript error: cannot change the default script host

  What should I do?

  Open command prompt w / administrative permissions (right click, run as administrator), and then run the command:
  cscript //h:cscript //s //nologo

• Cannot change the default program

  1 HP Pavilion dv6

  2 Windows 7

  3. "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  4. Windows update itself

  5. I was always able to change the default program, until Windows has created an another update (which still live with my settings).

  When I right click > Open with > choose by default the program give me this vague and frustrating error message indicating 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This is a load of ponyfeathers, because I am the only user and administrator of my laptop. I tried also to the solutions, but the error is apparently used in multiple areas of screw - rises of Windows. This error applies to all files.

  I am still able to go to administrative tools and change the defaults from there, but I'm not THAT tech savvy and I don't like playing with the pieces dark and deep programming from my laptop.

  Hello

  Restore the system to the point before you install this update from the Windows Update.

  Resources:

  How to do a system restore in Windows 7

  I recommend you to change the default setting for Windows Update:

  Open the Control Panel (Display icon)and click the Windows Update icon.

  In the blue left pane, click the change settings link.

  Changing current configuration in ' updates ' on ' check the updates but let me choose whether to download and install them. '.

  Resources that I think that will be very useful for you:

  Hide the Windows 7 updates that you don ' t Want never to install

  How to uninstall a Windows Update in Windows 7

• Cannot change the default program for opening .dll

  For some reason any, since I first linked the default program to open files .dll with Visual C++ 2010 Express (which is not truly attempt open, but instead of it gave me a message somewhere near the lines of "File not supported - Type does not open", incidentally) by chance I could not change since. I took a screenshot of the dialog box to try to change (URL below after all), but I noticed that the box was grayed out (the theme I have is a modified version of the classic Windows theme, but on 7, to clarify the operating system). I also tried to select a file after having hit the "Browse" button, but it didn't open anything. I tried several programs in the present to open, much less to change the default value (these are two notable examples): Netbeans - primarily an IDE for Java, but can open binary files even if she's not actually modify them (note: I changed absolutely nothing on any of them even if I has modified it to make it the default program but this problem affects more than just the ones) (, and it did not start until the last default) and Notepad. I went through the 'Open with' dialog box, and this is where I first encountered the problem of it (described above) outside the Control Panel, which it wouldn't let me change the association of file of it in particular, even if I didn't have one of these questions with any other type of file I tried to change, before or after this madness.

  https://docs.Google.com/file/d/0B02h60r9WvJrZ1E5R01xZzJ4akU/edit?USP=sharing

  Hello

  I suggest that you try to restore the system to an earlier point before the issue started and check if it helps.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Cannot change the default installation directory (missing ProgramFilesDir)

  I'm changing the default installation on my computer directory.  I looked at the number of threads here that cover the topic.  I go to regedit and follow this path: 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion' but I can't find the value 'ProgramFilesDir.' "  It's on Windows 7, 64-bit.

  Your much more course using the option 'tailor-made' for each program you want to install. Most of the applications have this option. Change the system variable or the registry entry can cause other issues, you may not like.

  J W Stuart: http://www.pagestart.com

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• Some applications play with headphones, and some of them play in my speakers. Cannot change the default playback of helmet device.

  Original title: Headphones working strangely

  I'm having a problem with the audio of my computer. I can't change the default playback to my Apple or my Turtle Beach x 31 headset device. Some of my applications are playing through my headphones, and some of them play in my speakers. When I look at the problem online, he keeps leading me to the evolution of my default playback device. When I right click on 'Helmet of Communication' and select "Set as default device" nothing happens. Not at all. They are defined as my default communication device already, who does not even make sense, since I was on my microphone internal.

  I already tried to uninstall driver "IDT High Definition Audio CODEC". Did not work.
  Sorry if I left out important information. Tell me. I know a little about computers, but I'm certainly not an expert.
  Hello
   
  I suggest you follow these methods and check.
   
  Method 1:Follow the suggestions in this article and check.
   
  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: Uninstall and reinstall the sound drivers.

  (a) click Start, click Control Panel.

  (b) click system and security, click System.

  (c) click on Device Manager.

  (d) develop sound, video and game controllers.

  (e) right click on the sound card, click Properties, click Driver tab.

  (f) click on Uninstall, click Ok.

  (g) restart the computer and check.

  If the problem persists, I suggest you to download and install the drivers manually from the sound card manufacturer's Web site.

  I hope this helps!

• Cannot change the default printer.

  Original title: print printer print

  Can't change my default printer to a printer that is assigned by the computer when you purchase my Canon MX310.  How to change.

  Hello

  This behavior can occur because of corrupt drivers, incompatible drivers, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  You get the error while changing the default printer? If Yes, what is the exact error message?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Set or change your default printer
  http://Windows.Microsoft.com/en-in/Windows-8/set-change-your-default-printer

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cannot change the default CSS

  I want to change the default colors used in the "Table" view games I changed C:\OracleBI\web\app\res\s_oracle10\b_mozilla_4\views.css and restart the presentation services. I still have not the desired effect when I create the new application.
  
  What I'm missing here?
  
  Thank you
  Dinesh.

  You also update the same file in the folder \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\etc.?

• Cannot manually change the default e-mail reader more.

  I'm want to use Kiwi to Gmail as my default e-mail client. And to do this, I have to use Messaging to change default e-mail reader. Well, when I select the reader to e-mail by default from the inside of the Mall, it won't keep the settings. It simply returns to its previous settings. I open Thunderbird or Outlook, and they have set for the default client. And settings from one session to another. But the General control panel inside the Mail will not work. I can't even to prevent the "Mail" more as a client by default. Simply, it will switch to Outlook or Thunderbird.

  Normally, I think that it was a problem with permissions. But I don't see a way to check the permissions in El Capitan.

  I had to put the connected to the account of "Allow user to administer this computer" in users and groups then went to Mail and set default Outlook.  After the e-mail saved the default and then I removed the checkbox "Allow user to administer this computer" (two reboots) but saved the day when administrator.  Seems there should be an easier way, but it worked for me...

• Cannot change the default program to open certain types of files more

  I opened the month .package file type by using a specific .exe designed to cope.  I got this morning and by clicking on a .package file brought to the top of the screen "choose default program".  I chose the appropriate program, but it does not appear in the screen of the recommended program, and I can't find any way to make it use the default .exe.   I tried to change it in the area of selection of the programs in the the control panel by default and hot at the same result.  I can still open the files by starting the program manually and choosing the option 'Open', but it is a tedious and repetitive task!  This program is used to group graphic files in a specific format, and it is not uncommon to open and close files .package 5 6 times in a period of 10 minutes.  I really need to fix this ASAP.  My productivity has come to a near standstill.

  I'm on Win7 64-bit, the program in question is a stand-alone that has always been in its own folder in the downloads library.  I tried to move to the folder program files (x 86), but that did not help.  Windows recognizes the program when I make the request to select the default program.  When I try to use it however, it is not an option.

  I was going to link to the Microsoft Developer Network instructions, but it's a pretty large amount of information for it, so, let me suggest a small program that should be able to do it for you.

  http://types.sourceforge.NET/

• How do I change my default e-mail program in windows?

  Hello

  How can I change my default email in my gmail address program in windows xp pro [sp3]?

  Currently, when I click on "send to", the default value is outlook.

  Thank you.

  How to set your default e-mail to Gmail
  http://www.ehow.com/how_5151392_set-default-email-gmail.html Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA