Cannot change the host firewall configuration

Similar Questions

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Cannot change the host associations groups

  Hello:

  I'll put up a cluster with two nodes with two Dell servers and a MD3200 with two controllers. Each server has two SAS HBA, each one associated with each of the SAN controllers for redundancy.

  I stopped with a problem stupid aparently that not let me complete the Setup, and I need urgently finish it.

  The problem is that the 1 server is automatically asigned to the default group, and I tried to do a second group specifically for the cluster. I manually assign Server 2 to this group, but not way to assing server 1 also, so I'm trying to desassign server host cluster group 2, to assign it to the default group, but I can't find how. Now I have 1 server bound to the default host group and Server 2 in the clsuter group. All the options to manage, change or assign specific hosts or groups are disabled, and I can't configure the cluster.

  I think the problem is that access virtual disk (automatically generated by the software) is attributed to groups of two hosts, so I can't delete the second cluster group, if both servers are assigned, and the software doesn't let me do anything.

  Management software version is 10.84.G6.44 (latest version) and host is Windows Server 2012.

  Need urgent help. Thanks in advance.

  Finally solved reseting CLI configuration

• You cannot change the configuration of the host

  I have stop my vm which is on san emc readers and he zoned for a second esx server.

  When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

  (1) what I do 2) I tried vmotion and it did not work

  What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Cannot change the wallpaper and the theme of Windows 7 Home premium.

  Cannot change the desktop background.  I have a gateway Media Center GT5014.  They said there was a MS pilot specially for this problem but I don't know that it's the official name.  Or not my "update software drivers".  Ms certainly knows what it is... I've seen some answers in the forum for the starter editions, but nothing for the Home Premium edition.  I can't change themes, wallpapers.  Thank you.  kiki47z

  Could you please to:

  Panel configuration-easy access - ease of access Center

  Click on make the computer easier to see

  Scroll down to "remove background images (sicesdonneessontdisponibles) and confirm that it is not checked.

  MS

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• Cannot change the default IP address after the upgrade to 4.1

  We just migrated a client 4235 ID version 3.x to 1.0000 S47 using the Ugrade/Recovery CD 4.1

  We try to apply the basic configuration as change the host name & IP address using the command CLI "SETUP." Whenever we apply the changes by selecting the appropriate item (2 - save this configuration configuration and output), im getting this error "error: could not restart network services.» Unrecoverable error occurred. Node MUST be restarted to activate alarming. »

  Below is the output that we captured during the initial configuration process:

  Installing sensor #.

  -System Configuration dialog box-

  At any time you can enter a question mark '?' for help.

  User ctrl-c to interrupt the configuration at any prompt dialog.

  Default settings are in square brackets "[]".

  Current configuration:

  networkParams

  IP 10.1.9.201

  netmask 255.255.255.0

  Passerelle_par_defaut 10.1.9.1

  sensor hostname

  telnetOption disabled

  accessList ipAddress 10.0.0.0 netmask 255.0.0.0

  output

  timeParams

  summerTimeParams

  Active selection no

  output

  output

  Web service server

  General

  ports 443

  output

  output

  Currently: game Aug 26 10:13:29 2004

  Last modified configuration: Thu Aug 26 10:12:46 2004

  Continue with the configuration dialog box? [Yes]:

  Enter the host name [sensor]: IDS02

  Enter the IP [10.1.9.201]: 10.1.2.4

  Enter the network mask [255.255.255.0]:

  Enter the default gateway [10.1.9.1]:

  Enter the server telnet [disabled] State:

  Enter the web server port [443]:

  Change the current access list? [None]:

  Change the system clock settings? [None]:

  The following configuration has been entered.

  networkParams

  10.1.2.4 ipAddress

  Passerelle_par_defaut 10.1.9.1

  hostname IDS02

  accessList ipAddress 10.0.0.0 netmask 255.0.0.0

  output

  timeParams

  summerTimeParams

  Active selection no

  output

  output

  Web service server

  General

  ports 443

  output

  output

  [0] go to the command prompt without saving this config.

  [1] return to the configuration without saving this config.

  [2] save this configuration and exit.

  Enter your selection [2]: 2

  Error: Could not restart network services. Unrecoverable error occurred. Node MUST be restarted to activate the alarm.

  I'm also the same error on the first ID 4235 we just bought, pre installed with 4.1. We have changed the IP address each time, we get the same error w/c is "error: could not restart network services.» Unrecoverable error occurred. Node MUST be restarted to activate alarming. »

  I just wonder of bec before that, we changed the IP address & front door for a couple of times & we don't have this kind of problem. The IP address change has been done during the test phase of activities & the problem came only when we already have this ID on the production. My client has just need to change the IP address beak of some changes in the network.

  We tried to restart two IDs, but the problem remains.

  I am trying to get some technical info on the site Web of TAC, but I can't find anything.

  Hope you can help me on this one.

  Thank you very much.

  your default gateway is incorrect. fix that, and you should be good to go.

  Thank you

  Chris

• Error of 0x8007042c, cannot start the Windows Firewall

  Original title: error 0x8007042c, you cannot start the Windows Firewall

  Help

  I can't have the windows firewall to install and run...

  I have a picture of a mistake, but I don't know how to post the photo of the error here.

  Firewall Windows cannot change some of your settings
  Error code;   0x8007042C

  Concerning

  Bill

  E-mail address is removed from the privacy *.

  Old man again on XP PRO

  Hi Dan,.
   
  You might have a corrupted user profile, I'd like you to create a new user account and test the question.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot change the default mode in wscript

  In Windows 7, when I try to change the default mode of wscript, I get an error message. When I get home

  CScript //H:CScript

  the command line, I get

  CScript error: cannot change the default script host

  What should I do?

  Open command prompt w / administrative permissions (right click, run as administrator), and then run the command:
  cscript //h:cscript //s //nologo