Cannot change windows Vista Wallpaper

Similar Questions

• cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

  activate Windows vista ultimate 64 bit

  cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

  Hi Jarska,

  ·        You did changes to the computer recently before the issue started?

  ·        If your computer came pre-installed with Windows Vista, or you don't have it installed separately?

  You receive this error 0xC004E003 when the Software Licensing Service reported that license evaluation failed on your computer. You can access the link below and follow the steps in method C and check if that helps you solve the problem of activation. If the C method does not work, you can follow the steps in method G and try activation using the automated phone system.

  http://support.Microsoft.com/kb/931276

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Windows Vista (KB968930) code Error 80070020

  ORIGINAL TITLE: install

  Cannot install Windows Vista (KB968930) code Error 80070020 continue to flock to the top what should I do?

  Refer to:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/attempted-installs-of-KB968930-Windows-PowerShell/e3577789-245e-E011-8dfc-68b599b31bf5>

  UTC/GMT is 00:12 Sunday, July 8, 2012

• Cannot start Windows Vista - ntoskrnl.exe is missing or damaged

  Hello, I am running Windows Vista. When I tried to start today I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. How can I do that I can't use my netbook? Im not a geek, any advice would be apreciated, thanks

  Hello

  1. don't you make changes to the computer before the show?
  2. are you able to boot to the desktop?

  I suggest you try the steps from the following link:

  Windows cannot start with the error of the ntoskrnl.exe missing or damaged when the keys are pressed at the start
  http://support.Microsoft.com/kb/2022960

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• Cannot install Windows Vista Service Pack 2. The following error message appears: 0X800707d1

  Hello

  Three years ago, I bought a Dell Inspiron 1525 laptop. Never met a problem until I tried to install Windows Vista Service Pack 2. I already followed each step instructions Support of Microsoft issues Service Pack for any result or solution. In these cases, I have downloaded the pack update directly from the wepage of Windows Vista, installed Windows Update Readiness Tool, disabled my antivirus (McAfee) and came up with nothing. I even tried to install this update in Mode safe but also failed to install Service Pack 2.

  What is happening all the time, is that I double click on archive downloaded in order to install (having already started my computer in Mode safe mode with networking reportoire and disabled the antivirus as well as its firewall). The Service Pack window opens and I click 'Next' for all the necessary instructions, including 'the computer automatically restarts. When the toolbar installation is completed, the computer automatically goes to restart itself. 3 steps appear as a requirement for the completion of the installation process. All goes well until he reaches "step 3 of 3:100% finished. Do not turn off your computer. After about ten minutes of stall in this step, the following message appears on the screen: "the Service Pack cannot be installed, returning from changes. Do not turn off your computer.

  The computer then rolls back all the changes and initiated in the normal state. After the opening, the first window that appears displays the following message: "the specific driver is not valid. "(Details): error: ERROR_BAD_DRIVER (0x800707d1). I proceeded to check and update alone driver of my computer, then try again to install the Windows Vista SP2 and all the operation has been a failure. I was cracking my head trying to solve this particular problem, and each time the same error pops up. I am seriously considering reformatting Windows Vista from manufacturer CD from my Dell, but I don't know if that would help.

  If someone could help or advise with everything that I would appreciate it a lot.

  Kind regards

  Rodrigo

  Hello

  Method 1: Follow the steps from the links below and check if the problem persists.
   
  Step 1: Safe Mode
  I suggest to start the computer in safe mode, then try to remove the Briefcase icon and check if it helps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the problem persists, I suggest you follow step 2 and check.
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the start link to configure the computer to normal startup mode.
  Method 2:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358
   
  Hope this information helps.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• Cannot start windows vista: bugcheck 9f

  Title: bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648

  my laptop crashed and closed, and I don't know what to do. can someone help me please.
  yesterday when I turned off my laptop it's ok.but today when I pressed the power button, it started normally
  He showed only two options:
  'launch start up repair (recommended)' or 'start windows normally '. Startup Repair cannot fix the problem and start windows normally does not work, it remains just on page load for hours.
  the problem is bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648
  I really need my computer soon, and I do not have the windows cd .i don't really know what to do someone help me please

  Hi Ak_609,

  1. Did you the latest changes on the computer?
  2. When you receive the error message from error checking?

  First unplug all external devices (except keyboard and mouse) and then try to boot to the desktop and let us know the status.

  Method 1

  Check if the computer starts in safe mode and after back with the results.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If the computer starts in safe mode then I would suggest you to perform control and clean boot if it helps.

  It is possible that some third-party programs installed on the computer is at the origin of the problem in normal mode.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cannot start Windows vista 64-bit is not after installing SP1

  When SP1 is installed, it will ask to "restart now" click on that and it not his "disconnect", then moves to step 1 of 3. " arrives at 97% and restarts. When it starts and happens to where windows should load up, it just goes to an error screen that says...

  "Unable to start Windows. A recent hardware or software change might be the problem. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: acpi.sys
  Status: 0xc0000098
  "Info: Windows failed to load because a required file is missing or corrupt.

  Now I can put in the disc of windows and repair and it will load and everything is good but not SP1 and if I try to install again, the same acpi.sys error again.

  I changed the power settings for monitar and readers do not turn off if the system is idle for long periods of time. I have reformat the HD does have 2 attacked together but spent the 1 hard drive and changed RAID.  This change has been to try to understand why my computer would hard lock. So far it isn't hard lock now. just can't update vista SP1 now. No update problem when he had 2 hard drives had attacked

  Any help would be great.  THX

  Hello

  Microsoft has released the analysis tool system update to resolve certain conditions that could cause the installation of updates and other software not only not for work. You don't have to manually run this tool. This tool is offered automatically through Windows Update on computers that have a condition that the tool could solve.

  System update readiness tool is available on the Windows Update Web site. To obtain this update, follow these steps:

  1. click on start-> click on Control Panel, and then click Security.

  2. under Windows Update, click check for updates.
  Important This update is available on Windows Update only to computers that have a condition that the tool could solve

  The following files are available for download from the Microsoft Download Center:

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  For more information, see article http://support.microsoft.com/kb/947821

  All the best!

  Diana D D

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• It cannot install windows vista pack 1. tried several times but not able to.

  Remember - this is a public forum so never publish information such as email or phone naked

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Download link for the 32-bit version of Vista SP1.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330)

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot add Windows Vista PC to Windows 2008 domain. Error message: an attempt to resolve the DNS of a domain controller in the domain being joined has failed...

  When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field.  I don't know why I can't add my new Windows Vista computer.

  I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP)  I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.

  After initial search for information, I found the following error message when you do a nslookup from my new vista box.

  Nslookup mydomainname

  Server: hqserver64.mydomainname.net

  Address: 192.168.0.99

  hqserver64.mydomainname.NET cannot find mydomainname: Server failed.

  I do not understand why I suddenly get these error messages when I was able to reach this area in the past.

  Hello Stan Smith,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install Windows vista service pack 2

  OT: used to install service pack 2 for vista
  : TRY TO INSTALL IT SAYS CANNOT INSTALL THEN RETURNS TO ORGINALL PARAMETERS CAN SOMEONE HELP

  Hi Sime JX,

  1. What is the accurate and complete error message you get?
  2. you try to download and install Windows vista Service pack 2 or install through Windows updates?

  Method 1
  I suggest you perform the clean boot and then install Windows 7 service pack 2.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest to turn off all antivirus and firewall on the computer and then try the steps from the following link:

  Disable the antivirus
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Method 3
  I suggest you make the SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• cannot reactivate Windows Vista the reinstallation.

  cannot activate Vista after reuinstalling

  Hello

  ·        What happens when you try to activate windows vista again?

  ·        You receive an error message or code?

  I suggest that you follow the instructions in the link to solve the problem you are experiencing:

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  You may be unable to activate Windows Vista over the Internet by using the Windows Activation Wizard of

  http://support.Microsoft.com/kb/933177

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems