Cannot configure automatic duplexing in Officejet 7310

Similar Questions

• Automatic duplexer on Officejet pro K550

  Automatic duplex printing unit works but will not be on double-sided printing the next duplex print job after print output. Configure whenever I need to print double-sided.

  Hey, that's fine. Thanks for letting us know what fixed your issue.

• HP support cannot get officejet 7310 all-in-one to print even though looks and sounds like it is.

  Printer, HP officejet 7310 all-in-one had not been used in 3 weeks.  Cartridge black ink but nevermind. New in color cartridge.  Print test works very well.   Do you have the drilling cleaning cartridge.  Downloaded diagnostic printing and scanning tool.  He ran.    Yes, it prints, but only a couple of lines are visible, but barely, ghostly, and then nada.  The color cartridge is not used.  This on a PC with windows XP.  So far, the printer worked great.  The same results if using Notepad or an Internet site.  Suggestions anyone?

  The obvious suggestion is to replace the black cartridge.  If you need print now, you can use reserve mode or select photo paper (which will use only the color cartridge).

  The printer will automatically not using the color cartridge when the black cartridge is out of ink.  If you want to use the color cartridge to print in black, you can remove the black cartridge.  The printer will then give an error on the screen but is printed in reserve mode using only the color cartridge.  Copies cannot be predicted with the printer by way of reservation, you will need to replace the black cartridge.

• HP Officejet Pro L7580: "Automatic duplex printing Module is missing" message.

  Although the double-sided printing works fine, the "Automatic duplex printing Module is missing" message, as I updated to Windows 10. I installed the latest drivers. Maybe a firmware update can do the trick?

  

  More from my side:

  I thought a little more on this subject and maybe we can solve this problem with a printdriver alternativ.

  Let's try a driver "HP Officejet Pro K550 series".

  Perform the following steps to install the printdriver alternativ:

  • Right click in the bottom left of your desktop and select 'control panel '.
  • then select "devices and printers".
  • Click on "add a printer".
  • Then click on "my printer is not listed.
  • then mark "local printer" (bottom)
  • Select "HP" on the list on the left and "HP Officejet Pro K550 series" on the right
  • After that finish the wizard

  After you have added the printer with success mark this printer as "standard printer" and allows to have an eye on printing and we'll see whether or not the error appears again.

  Kind regards

  Steven_K

• Win7 x 64 native driver for the OfficeJet 6110 does not recognize the element of automatic duplex unit add-on unit

  After upgrading my laptop Lenovo T61 to Windows 7 x 64, I find that my OfficeJet 6110 unit automatic duplexer is not recognized.  The duplexer has worked flawlessly for 3 years under Windows XP, but apparently he is not recognized with Win7 x 64 native driver.  The auto duplexer unit is a standard HP brand option for this printer.

  The printer is connected to a USB hub, which is connected to my laptop.  The duplexer works fine when reconnected to a XP operating system with the pack of HP software/driver installed.

  Y at - it a trick to make the add-on unit unit duplex automatic, recognized and functional element in Win7?

  Thank you!

  Hello
  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• HP Officejet J6480 All-in-onw automatic duplex printing does not work

  My HP Officejet J6480 automatically duplex in Windows Vista. This feature is absent from Windows 8.

  Y at - it a fix for this problem?

  Thank you

  Meantime2013

  Salvation Dragon-fur,

  I have uninstalled and installed the software of the printer for the fifth time and for the first time, I actually saw J6480 on the registration page. Settings of the printer turned on and the automatic was still missing.

  I also checked "HP Officejet J6400 series properties" and found an option that did not previously exist under device settings.

  Options installable unit duplex (for 2-Sided Printing) was put to uninstalled.  I changed this option to installed and finally I automatic two-sided printing.

  Thank you once more for spending your time to help me.

  Best regards

  Pending

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• 6500 power automatic duplex

  I just bought an Officejet 6500 E709n. It came with the duplexing feature (accessory that attaches to the rear).

  I earlier had an Officejet 7310 also having two-sided printing function.

  I am doing with the 6500, what I was doing with the 7310:

  -set the automatic duplex power (so that the ADF (ADF) will read both sides of the sheet)

  -affect printing DUPLEX (so that the printer prints on both sides of the print media)

  -copy a document of duplicate entry in a document to output duplex in the following way:

  -I place a sheet (or a number of sheets) into the automatic document feeder

  -AJD reads the side front side of the sheet and releases it only partially

  -l' print the side front of the sheet and partially released so that it dries

  -the drawee of the duplexer sheet out of back inside

  -pull ADF, the rear entrance to the inside sheet in order to read the entry side back

  -l' prints the side back of the plug provided by the duplexer and it releases completely

  -If the other leaves are in the ADF, the ADF reads the next sheet and the process is repeated until there is no input more

  I know how to set print double-sided on the 6500, but I can't find instructions for reading duplex value.

  I just spent a few hours with the support of cat, which left me hanging at the end asking me to call HP Total Care phone support to the 1-800-474-6836.

  Can you help me?

  The ADF in the OJ 6500 Wireless does not have the capacity automatic duplex. He cannot read the two sides of an original automatically.

• Mystery on 1606dn supported sizes of paper for automatic duplex printing

  I'm trying to find out if the 1606dn supports automatic duplex copy legal paper size, but the info is not in the user's manual, which just refers to "that the driver supports. Of course, I cannot and will not install the driver if I do not have the printer, so it's kind of impossible for me to check what paper sizes the driver supports.

  In any case, someone has this information, or is it a secret or something?

  Thank you.

  Hello

  Automatic duplex is supported for legal paper size as you can find targeted by the software's technical reference guide:

  a duplexing unit is installed and manual duplexing is enabled in the driver, the product automatically
  prints on both sides of paper types that are supported for automatic duplexing (Letter, A4, Legal, and
  8.5 x 11 only). For paper types that are not supported for automatic duplexing, a Help message appears
  prompting you to configure the driver settings for manual printing on both sides. Manual printing on both
  sides does not occur automatically.
  

  http://h10032.www1.HP.com/CTG/manual/c01996606.PDF

  See page 224 of the manual above to find how to set duplex printing and paper types are not supported for tasks a

• How to upgrade my OfficeJet 7310 to Lion software?

  I migrated all my docs and my old iMac to my new iMac under Snow Leopard apps running Lion. I have hp printers 4 connect to my iMac, the other via ethernet and others via the usb port. OfficeJet 7310 is the main printer. But I don't see software compatible Lion anywhere. Can not print or scan until hp came back with a new software? I could swear I read that all you have to do is to download from the BONE. But I can't find it on the OS. A technician Apple told me that as soon as I connect the impression to my new Mac, it will automatically download. But the 7310 is connected to the new one as the old and new iMacs are both connected to the same ATT router via ethernet.

  Help, please. I can't completely switch computers until I have the ability to print on the new.

  Hello

  To clarify, the Apple ICA module used for the analysis, it is an engine and not a software

  By adding the printer, you will be able to print as used to, by pressing file > print from the specific application (for example. (Word, Textedit etc..)

  To scan, you can scan using the "Print & Scan" Scan tab (located under system preferences).

  Or open the Image Capture or preview of Applications and analysis here.

  It will not require no single configuration, just follow the procedure of scanning those.

  Just be aware that you will not be able to scan from the printer control panel as long as there is no comprehensive software solution, you need to run one of these Applications and perform analysis from there.

• Vista Patch Duplex for Officejet 7100 Series

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for printers to all-in-one Officejet 7100 series.

  Patches for other models can be found here.

  This patch has been tested good with dozens of sucessful patches distributed by electronic mail.

  The zip file contains two files:

  OJ7100.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpo5h83l. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ7100.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Vista Patch Duplex for Officejet 6110

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  attached the zip file has a patch and instructions to fix this problem for Officejet 6100 all-in-one series of printers.

  Patches for other models can be found here.

  This patch has been tested good with dozens of sucessful patches distributed by electronic mail.

  The zip file contains two files:

  OJ6110.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpo4pg3l. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ6110.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Vista Patch Duplex for Officejet D Series

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for printers to all-in-one Officejet D series Officejet D135, D145 Officejet and Officejet d155s.

  Patches for other models can be found here.

  This patch has been tested good with dozens of sucessful patches distributed by electronic mail.

  The zip file contains two files:

  OJ_D.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpogds3l. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ_D.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Message edited by Bob_Headrick on 01/06/2009 11:16
  Message edited by Bob_Headrick on 01/06/2009 11:17

  Placeholder for updates.

• How manual duplex with OfficeJet 6500 has on Win7?

  On Win7 with OfficeJet 6500 a (driver) there is no option Manual duplex (double-sided printing) in the print dialog box of the driver.

  How can I perform manual duplex printing?

  If this issue is left on the driver... Please add it to the rear in asap :-) Printer do not bother to buy without it.

  AmazingFactory,

  You can see this post. It has some good information about the problem that you have posted on.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-6500A-plus-automatic-duplexing/m-p/549251#M27404

• HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

  Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

  You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.