Cannot configure Essbase on new install

Similar Questions

• CANNOT CONFIGURE ESSBASE

  Hi all
  I try to configure Essbase using the EMP 11.1.1.3 system configurator, but I get the error message.
  
  I have successfully set up the Services of the Foundation. Then I started to configure Essbase. I was able to properly configure the following components:
  
  1 Essbase Administration Services
  2. the service provider
  3. smart Search
  4 studio
  
  But, Essbase shows the exclamation mark next to it (which basically means that it has not set up successfully in the first attempt).
  
  Now, when I try to restart the EPM system configurator again to complete the game Essbase. I can't move forward because of the following error:
  
  "The agent Port number is in use. "Please re - enter the agent port number. I had initially 1423 as my port number of the (default) agent during the first attempt, but now when I re-run the configuration it gave me this error.
  
  My OS is windows XP and Hyperion Version 11.1.1.3
  
  Help, please
  Thank you
  
  Published by: 893898 on October 30, 2011 21:06

  You can use netstat in cmd promt to see... course Hyperion product list if you did the default installation he used confilt with other ports hyperion so IAM... you can use 1435 or 1436

  In addition, you can use active ports software that will display all the ports of Hyperion

  list below are for some of th port I remember

  E.m.p. Calc-8500
  EPM-19101
  EMP web-19091
  workspace 45000
  EAS 10080
  APS - 13080
  planning-8300
  EN-8200
  Webanalysis-16000
  IR services-6810-6817

  SSP 28080
  HFM - 80
  iThink :)

  Essbase 1423

  IAM sure you can go with 1435 1345,1234 too :) for your essbase

  So deserve points for my two of my messages :)

• Cannot create bookmarks. New install, have disabled all extensions, tried safe mode and reset to the default values. Any help of any of these actions.

  Hello.

  Statement of the problem is very simple: Firefox won't create bookmarks.

  New installation with Mint 17. New generation of PC with Asus A58M-A/USB3 motherboard, AMD A4 6300 processor 4 gig memory stick.

  All Mint and Firefox packages are up to date.

  A new profile has been created for the test, Firefox has been started in safemode, purged and re-installed and reset to the default values. None of these actions have contributed.

  Here is the info according to the troubleshooting information in Firefox

  The application databases

  Name: Firefox
  Version: 33.0
  User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:33.0) Gecko/20100101 Firefox/33.0
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Mint search Enhancer
  Version: 1.0
  Enabled: true
  ID: [email protected]

  Name: elegant
  Version: 1.0.7
  Enabled: true
  ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}

  Graphics

  Description of the adapter: X.Org - Gallium 0.4 on AMD ARUBA
  Device ID: Gallium 0.4 on AMD ARUBA
  Driver version: 3.0 Mesa 10.1.3
  GPU accelerated Windows: 0/1 Basic
  Vendor ID: X.Org
  WebGL Renderer: X.Org - Gallium 0.4 on AMD ARUBA
  windowLayerManagerRemote: false
  AzureCanvasBackend: Cairo
  AzureContentBackend: Cairo
  AzureFallbackCanvasBackend: no
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.frecency_experiment: 3
  browser.places.smartBookmarksVersion: 7
  browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
  Browser.Startup.homepage_override.buildid: 20141013200257
  Browser.Startup.homepage_override.mstone: 33.0
  dom.mozApps.used: true
  extensions.lastAppVersion: 33.0
  Media.GMP - gmpopenh264.lastUpdate: 1416067922
  Media.GMP - gmpopenh264.version: 1.1
  Media.GMP - manager .lastCheck: 1416067922
  network.cookie.prefsMigrated: true
  places. History.expiration.transient_current_max_pages: 80569
  plugin.disable_full_page_plugin_for_types: application/pdf
  privacy.sanitize.migrateFx3Prefs: true

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSMIME
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSSL
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSUTIL
  The expected minimum version: 3.17.1
  Version: 3.17.1

  Experimental features

  What other information can I give?

  Thank you.

  Jim

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• 25 Firefox is unable to read the configuration file on new install

  I try to install Firefox 25.0 on a XP - SP3 machine and receive the error "failed to read the Configuration file. Please contact your system administrator. I use a file to mozilla.cfg that I created and that you have applied to previous versions. The mozillia.cfg file has entries Pref lock, which are formatted as follows:

  lockPref ("Network.protocol - handler.external.shell", false);

  I have read discussions on various forums and the recommended fix seems to be a "clean reinstall. This machine has never installed Firefox, so a clean reinstall is not an option.

  As noted by one side this version of Firefox will be not to read the config on any OS file I tried Win7 or XP, I did a clean reinstall on both of these machines with the same results.

  I appreciate your help with this.

  If it helps, here is the content of my mozilla.cfg and local - settings.js.

  C:\Program Files\Mozilla Firefox\mozilla.cfg

  //
  
  lockPref("security.enable_ssl3", true);
  lockPref("security.default_personal_cert", "Ask Every Time");
  lockPref("network.protocol-handler.external.shell", false);
  lockPref("plugin.disable_full_page_plugin_for_types", "PDF, FDF, XFDF, LSL, LSO, LSS, IQY, RQY, XLK, XLS, XLT, POT PPS, PPT, DOS, DOT, WKS, BAT, PS, EPS, WCH, WCM, WBI, WB3, RTF");
  lockPref("browser.formfill.enable", false);
  lockPref("signon.autofillForms", false);
  lockPref("signon.rememberSignons", false);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("dom.disable_window_move_resize", true);
  lockPref("security.enable_tls", true);
  lockPref("dom.disable_window_flip", true);
  lockPref("dom.event.contextmenu.enabled", false);
  lockPref("dom.disable_window_status_change", true);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("browser.startup.homepage", "http://intentionally removed");
  lockPref("app.update.enable", false);
  lockPref("extensions.update.enabled", false);
  lockPref("browser.search.update", false);

  C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "mozilla.cfg");
  

• Cannot configure biometric after re - install system

  I had to reinstall the whole system of the image. All goes well and works fine now BUT... I can not configure the utility of scann of finger with my fingerprints. Whenever I try, I am able to scan and I see that it works. But the tool then ask you to save the configuration.
  When I try to save it, I get a message that, in German, said.

  Procedure fehlgeschlagen. Double Vorlagen are already available.

  I will try to translate into English:

  Operation failed. Double models are already available.

  I have no idea of what I need to do now and I want to use.

  Who can help me with this problem?
  Thanks in advance
  Storm 007

  I use Qosmio x 300 with fingerprints, but I had no problem with the registration of fingerprints.
  Maybe you should try to remove all the fingerprints of Access Manager True suite and create new.
  Please let us know if the situation will be the same with the new fingerprints.

• I put a new hard drive in my laptop and when I installed Windows Vista I get this message: "windows cannot configure windows to run on this hardware of computers."

  I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers."  I can't install an oem on a new hard drive version?  This is the portable original in all other respects.

  original title: new hard drive and vista

  Hello

  strange that you can request that

  HP computers have been known to not let you install Vista on a non HP bought replacement hard drive

  There were a few posters with this problem here

  If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)

  You can change the hard drives, RAM, etc.

  I presume that you boot from the Vista DVD

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configureing Web server after installing Essbase on a distributed environment using the standard deployment methodology

  Hi all

  We have installed Oracle EPM (11.1.2.3) on an environment (Dev), distributed according to the standard methodology.

  On the first server we have foundation setup, aps, eas and on other servers (rest 5) we have setup an essbase, eis and studio alternately (Essbase transit all servers except on foundation server)

  As mentioned in the installation/configuration documentation we have run the configuration of websever on all servers and finally he ran on the server of the Foundation.

  There was no problem of erros/experienced in setting up however we would like to understand why we need to configure the Web server (on server 1 that has services of the Foundation) every time when we install products not based on the Web (Essbase, EIS and studio) on other servers... My question may sound silly but I'm confused, because these products are not accessible on the web.

  In addition, we also want to understand if we can monitor essbase services similar to the Foundation, aps and eas on the weblogic administration console.

  Based on my understanding, I guess we cannot monitor essbase server process on weblogic, however if it is possible to montior please let us know the procedure...

  Thanks in advance.

  Concerning

  krishnatilak

  Hi Krishna

  You do not have configure it once again if you have installed only EIS and Essbase later.

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• How to install and configure Essbase in System i or AS 400

  Hi all
  
  I have been instructed by my employer to install Essbase 11.1.1.3 AS 400 system. Can someone guide me that what and how I have to finish this task.
  
  I don't know how to install and configure Essbase in Windows but I never get chance to work on AS 400 systems.
  
  I have feedback promp hopping.
  
  Thank you much in advance.

  The old SPSS (now IBM) product lags Oracle a bit. I think that they jump system 9 altogether.

  I remember using the Essbase 5 (I think) version of it on an AS / 400 and the thought, he behaved exactly as an instance of Windows 'normal '.

  Kind regards

  Cameron Lackpour

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• I can't download ADOBE Flash. The error message can't since Firefox. The other error message is "CANNOT CONFIGURATION of APPLICATION." Any suggestions?

  ADOBE downloaded 12.exe. FLASH will download, but will not be installed. The error message is "cannot CONFIGURE
  APPLICATION»

  Hello, please try with adobe offline installers that are available on https://www.adobe.com/products/flashplayer/distribution3.html (choose the package "Browser Plugin" for firefox).

• Cannot configure embedded card Gigabit Ethernet...

  Hello

  I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.

  Is Windows XP SP3

  I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!

  My Broadcom 802.11n wireless card is in place and works fine

  Documentation of the specifications Apple says:

  • Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)

  When I ran PC-Wizard, he told me:

  Network card:

  BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe

  If I go to computer management program and open the list of Device Manager

  Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...

  How to proceed with the installation?

  Any advice?

  Thanks in advance

  You have the DVD with drivers?

  See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?