Cannot connect and more as a user apps

Similar Questions

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?

• WAP54G access point cannot connect to more than one PC at a time

  Hello

  I'm a newbie in the entire wireless router installation process.

  I have a WAP54G AP. I managed to enter the configuration page and rename my router and set a WPA2-Personl password.

  The issue I'm facing is that when my roommate and I try to connect to the router at the same time, it shows the laptop that connects then as one who has "limited connectivity" and so cannot use the internet. However, the 1st laptop works very well!

  The settings for the router were all left by default.

  I don't know, but this problem has something to do with the fact that the router that is configured with a static IP address.

  If Yes, then there is an another issure which is that whenever I have try to change static automatic/Dynamic IP, the page fails and that the router is not even connect to configuraion (192.168.1.245) page after that. The only way to get this page again is the reset of the router.

  Also I am not able to get directly in the config page, when I connect my router to my laptop through lan. I need to change the LAN IP address to 192.168.1.x where x is > 1.

  Is this normal or is there a problem?

  If anyone has a solution to all or part of these problems, I'd love to hear back in shape as you.

  Thank you!

  SIS

  Yes. This is the reason.

• Computer cannot connect to internet after the user changed network name

  Original title: "Network__".

  We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?

  You gave your PIN #?
   
  There should be a reset button on your access to restore your system to
  by default. Of course, you will then have to re-enter many of your
  security data, unless you have saved it.
   
  "Artic Auto Air" wrote in message
  News: 92aa11d3-77ea-4680-b04c-c415b59e2c66...
  > We provide free wifi in our lobby and yesterday a man asked our pin #.
  > so he could get on the internet, we discovered after leaving one of our
  > computers cannot connect to the internet because the name of the network shows now
  > like its computer network and there need a code key passes and the password, how
  > We turn off and back to ours?
   
   
   

• "Cannot connect" and I'm stumped.

  I could not connect to the Internet (through AT & T) all day (early 2011 MacBook Pro, OS 10.11.3 and a wired Ethernet modem).

  As soon as I start it, I get the following error message:

  "Network connection: the connection failed because the communication device is not available." Make sure that it is connected to your computer, and try to reconnect. "(I did, but it does not help).

  In system preferences: network: "AT & T DSL: not connected" and "Ethernet: not connected." The Ethernet cable is not plugged in or the device at the other end does not respond. »

  I have no Internet connection problem with a utility boot disk, which has network settings and account Internet identical to those on the drive hard internal and is essentially a put to update the clone of the drive of the MacBook.

  When I checked the MacBook with disk utility, as a first step, he reported some problems with partitioning [!], but when I ran disk utility, again, he has reported that "the partition plan seems to be OK." Disk Warrior noted no problem. The button "Help me" in the network reports 'Not connected' preferences as above, but does not offer to fix it.

  I've never had this problem before, and I see no option except to wipe the hard drive and reinstall from a Time Machine backup (a little intimidating because I've not done this before either).

  Grateful for the advice.

  Bob

  Galveston

  Can be restoring from time machine is a good idea. It's easy, you start your Mac in the recovery mode by pressing Cmd - R and the power button. Then begin to restore. The only problem is that it is a lot of time.

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Photosmart HP 6520 cannot connect to the server to use apps on printer

  Last night, I bought the printer, saved, set up with the apps on my phone and Tablet and connected it wireless. When I try using one of the applications on the screen it is written "server connection error:-1 there was a problem connecting to the server." Press Retry to connect again, or OK to exit.

  I have a hp email address configured for printing and it works very well, I just can not access any of the applications on the screen of the printer...

  All that I'm missing?

  I'll send a private message to your Inbox shortly on what to do from that point to try good issue that you experience in obtaining the printer to access applications on your private network.

• Cannot connect on rman after the user sys password change

  Hello
  After to change the password for user sys does not connect with: target rman.
  Can someone help me?
  
  Eder

  OK, good luck, if your problem is resolved, examine fence wire and reward the answers 'correct' and 'useful '...

• Cannot connect and use 2 hard drives Canvio de Store.E at the same time

  Hello

  I have 2 devices Store.e Canvio: 2 TB and 3 TB respectively but it seems that I can't connect/use them at the same time, as if I do it, one of them (the last I connected), becomes inaccessible ("access denied").

  If I disconnect the first device I connected, the other starts to work,

  Is an odd question, and I can not find someone to live something similar...

  No idea how could it be the cause, or how can I solve it?

  Thank you

  I m wondering if the same problem is displayed using another computer or another USB hub with an additional power supply.

  From my point of view of the few this problem could be related to the low power provided by a single USB port.

  The two hard drives seem to support the USB 3.0 standard.
  The USB 2.0 port common provides 500mA and USB 3.0 requires 900mA
  This means that two USB devices connected simultaneously use 1800mA which could be too much for the USB ports for s laptop

• Cannot connect Internet more with my A300D

  I own an A300D and I used it without no prolems for 3 weeks. I connect to the internet through a router, I also used for the other 3 PC. Evyrithing is OK.
  That's why 3 weeks ago I lost internet connection on my A300D. Taking into account the connection, I see the A300D see the router but internet access is impossible. I compare the configuration with my other PC and I can't detect differencies. I don't understand why all of a sudden this access is not possible

  Hello!

  Did you already check if the wireless network adapter is enabled? You can do this by using the hardware on the laptop switch and the FN + F8 key combination. Check it!

  If it doesn't work you should try reinstalling the laptop using Toshiba HDD or Toshiba Recovery disk recovery option. With these settings of your laptop should work fine again.

  Good bye

• Cannot connect and access Facebook

  why I am not connect & not access my facebook & it please fill out a security check

  Original title:, I'm not sign in

  Actual use of the phrases and works. This isn't a chat room.
  This security check are you talking about? There is no such thing.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• Skype cannot connect (yes I have tried re installing/setting far and deleted my roaming folder of Skype)

  So as the title suggests, Skype cannot connect and yes I have updated to the latest version and have removed the trace of the Skype folder in the folder of the mobile.

  N0nUhn0nym0s wrote:

  IM using Windows Firewall that, ive tried time Skype for the permit.

  For my anti virus I don't have unless the Hitman Pro, Ashshampoo and mcafee site Advisor is considered to be one

  My internet Explorer, that I do not and cleaned the cache and cookies, is version 11

  Try the following:

  http://community.Skype.com/T5/Windows-desktop-client/quot-quot-error-Skype-can-t-connect-quot-quot/m...

• How to connect to Discoverer with apllication user?

  Hello world
  
  I have Oracle E-Business Suite and report in Oracle discoverer Desktop 4.1
  Currently, I create the database user so that the user can access report discoverer.
  
  The user allows the authentication of user connection of the oracle E-Business Suite, then we will have a SSO?

  Hello

  When the EUL is created, you can specify if a mode of database or application EUL is created. If you create a new application EUL so you can connect to Discoverer using the e - BS username and the password. You don't need SSO.

  If you have a database of EUL mode and want him to convert to a mode of EUL apps, you must create a new mode EUL apps and then export all in the mode of EUL database and import mode apps EUL.

  You cannot connect to a mode of EUL apps using 4.1.37, you patch up to a later version to run.

  Rod West