Cannot connect as administrator can't do anything

Similar Questions

• locked Windows 7 password cannot connect until administrator is

  My daughter has changed his user name and set a password on his laptop (dell inspiron 1545) is the only account.  tried to do a system restore, but can not login as administrator using the password she established, reports its invalid - cannot start in safe mode because I can't connect - what can I do?

  Try this:

  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  3. Press any key when prompted to boot from the DVD.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before the accident occurred.
  6 plan ahead: click Start / Help, then search for help on "password". Follow the instructions to create a key on your USB flash drive file so that you'll never find yourself in this uncomfortable situation.

• After update 4.0 cannot connect but IE8 can. Not a firewall issue.

  Immediately after the upgrade to 4.0 (from the last version 3.o) I was not able to connect to all addresses. The message is: "Firefox can't establish a connection to the server www.yahoo.com." Despite this, IE8 still works.

  It seems that our messages crossed.

  In any case, I'll glad to hear you're running now.

• QuickVPN connected, but I can't do anything on the LAN ping

  Hi all

  I try to use QuickVPN to connect to my corporate network. Yesterday I was to the point where QuickVPN actually connected and I could connect to the router from inside IP. But I can't see, or ping all computers on the LAN to company. Manual of the router says '' customer QuickVPN may access only the default LAN hosts. ''. Are the computers of the default of the company LAN LAN hosts?

  I added the router (RV220W) to the existing company LAN to test QuickVPN. The company LAN has a Small Business Server as a DHCP server and another router as the default gateway. The company LAN the subnet 192.168.1.0/24*, the cisco wan router has the subnet 192.168.103.0/24 and my VPN client is connected to a hotspot wifi with the same wan and LAN 192.168.3.0/24. The LAN of the cisco router address is 192.168.1.1.

  * I know now, 192.168.1.0/24 is the worst possible choice for a net business, but I didn't when I installed the Small Business Server. I'll try to change it to something like 10.123.45.0/24 later.

  Thanks in advance
  Mike

  

  Hello

  You can reach a PC in the LAN of RV220, because the default gateway is not RV220.

  This is what happens: the PC with fast VPN (for example IP: 192.168.103.10) is ping a PC with IP 192.168.1.10, via the VPN tunnel. Once the request arrives at the 192.168.1.10 PC, this PC sends the response to its default gateway (because don't have a direct connection to the 192.168.103.X network). If the default gateway is RV220, he'll know that the response should be returned via the VPN tunnel to the customer, but if it's another machine, it will just drop the package.

  In this case this another router (default gateway) must be configured with a static route, saying that subnet 192.168.103.x has as default gateway - 192.168.1.1 (RV220).

  As long as the IP address of the VPN machine fast is the same, it's ok. But if you move this PC to another local network, you will have again the problem.

  So if you plan to change the LAN IP of the fast VPN machine, I recommend using instead the Shrew VPN, where you can configure virtual IP on the client, that does not need to change.

  Kind regards

  Bismuth

• I forgot my password ID Touch and cannot connect. What can I do

  I just bought an IPad and set up Touch ID. I forgot my password. What can I do to access my IPad

  Hello

  You must restore your iPad on your pc make sure that itunes is updated 12.3.1

  See you soon

  Brian

• I can see the shared folder on the #2 computer but cannot connect.

  I can see the shared folder on computer 2 but unable to connect. It is said "see... administrator permissions. When I go to the computer and creat a hand 1, I can see on the 2nd computer but cannot connect. I can connect to the shared printer on one 1 computer file.

  When # 1 I can connect to #2 and open shared files (just like its supposed to!)

  I have checked the basics, (I can connect to the Printers folder) file sharing.

  Help, please. Both computers have a freash install WIN XP and have been updated to SP3 current peer-to-peer network, firewall is down, Microsoft Security on both

  Hello

  Run on the supercomputer network configuration wizard.  If this doesn't fix the problem:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools > Shell .

  3. type these lines at the command prompt, exactly as shown:

  NET user guest/active: Yes
  NTRights + r SeNetworkLogonRight u comments
  NTRights - r SeDenyNetworkLogonRight u comments

  Kind regards
  Chauvet J.

• An FTP error occurred - cannot connect to the host. Maximum number of users reached or not authorized to make the connection because of local firewall blocks FTP data

  For days now, I have tried every index in the book simply download a page Web of DW CC. I get this error no matter what I do. I asked the server administrator to check. GoLive CS2 works perfectly with the same information to the ftp server. But I wanted to pass to CC... It seems the problem and this error message is well known, there are lots of places of in-depth discussions. With so many variables and so many simple solution, which seems a matter of luck if it works or not, simply download your page.

  There are two different questions:

  1. Dreamweaver cannot connect to your site by FTP, but may of FileZilla.
  2. Uploaded by FileZilla pages are not displayed.

  Assuming that the files downloaded by FileZilla are correct root folder, the second question is the result of your being not properly propagated via DNS servers domain name. It could also have an impact on the first question (Dreamweaver cannot connect because it can't find the correct server).

  You should contact your hosting and Network Solutions company (where you have registered the domain name) to ensure that the correct name servers have increased to oyafilm.com. Until this issue is resolved, it is impossible to untangle why Dreamweaver cannot connect.

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• All my files turned .link files and I can't download anything including .zip it's impossible to read .exe files

  I have no internet connection on the laptop (windows xp) after I got this virus any. All my files turned .link files and I can't even open the help and support. When I open the Control Panel, it opens but the icons will lead me not to anywhere. I tried to type in the "Run" dialog box, but it will load and then stop, leading me to nowhere. Evrything is transformed into files .link except internet Explorer, my computer, my documents, the trash and another that I forgot, but even if I open internet, it is useless, since I lost the internet connection. I can't open anything to restore my internet connection. I tried restoring the system also, but it's been so long that it would not return to where it was fine. Also I tried to restore to when it was still very well, but it does nothing. I even tried the safe mode and it is still the same. I tried to format the Local drive, but it tells me to close something that may have been watch the computer or soemthing like that. I formatted the back towards the top but not the local drive. I found the windows xp CD but when the window opens to reinstall, and then when I click on reinstalling windows xp, it won't be going anywhere. The other links will lead to a place, but reinstalling windows won't open. I tried to use the system startup and you press on enter when he went to the Conference of the disarmament/something something and it still does nothing. It will say like taking files from CD or something, but it leads to nothing. I really want to just my laptop to remove everything so I can reinstall windows.

  See if this allows you to format and reinstall XP...
  http://www.YouTube.com/watch?v=Wf2Ffm33DhA

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• "How can I fix the iCloud" you cannot connect at this time "error?

  I noticed that I was not able to view my use iCloud on my MacBook Pro. To try to solve the problem, I registered on iCloud, but now I'm more able to sign in - it displays you cannot connect at this time. Try to connect again. In addition, I was not able to install anything from the App Store for about a day because it asks me my Apple ID and password and perpetually displays the activity indicator:

  

  Playlists and iCloud tabs are not sync between my Mac and iPhone 6 s either. Strangely, Messages and FaceTime are signed in and it works properly.

  So far, I tried to remove my iCloud Keychain password and delete the folder ~/Library/Application Support/iCloud/accounts - both without success.

  I wanted to create a new Apple ID to test a fresh user, however, create Apple ID link is grayed out and unclickable:

  

  To summarize:

  1. I can not connect on my iCloud account.
  2. Playlists and iCloud tabs are not synchronized.
  3. I can't download anything from the App Store.
  4. I'm not able to create a new Apple ID from my Mac.
  5. Messages and FaceTime are not affected and are still connected.
  6. I tried to remove my iCloud Keychain entry and folder in account iCloud, without success.

  What else can I try? I haven't installed any antivirus software and know that I have not downloaded something fishy to cause a virus problem or malware.

  Try to create a new ID here.

  Apple ID - create

• My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.

  You can try to reinstall an OSX, but I doubt if that will be successful.

  Ciao.

• Account administrator time full restrictions applied to it, can't do anything that requires administrator, even know the password

  Hello

  I currently have two user accounts on my PC. They both used to be administrator accounts, and to make a long story short, he ended it with an account that has administrator access, but that the account has been completely time limited by parental controls. The other account is a Standard user account that is incapable of doing anything that requires access administrator because of time restrictions...

  It gives me the message "logon failure: violation of account logon time restriction.
  I'm at a loss what to try then, seeing as how I can't install applications to fix and can't change anything without Adminstrative Priveleges.

  Thanks for any help,
  Nick

  Hello

  If you cannot disable the parental control using administrator accounts, if possible, try to create a new account and check if you can or not. If you can not always, unfortunately you will need to back up your files on an external and reinstall Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.