Cannot connect as an administrator

Similar Questions

• Windows 7 saves only me as a temporary user. Cannot connect as an administrator.

  OT: Windows 7 connect.

  Windows 7 saves only me as a temporary user. Cannot connect as an administrator.

  Hello

  See if that helps you.

  Before that the problem, perform a restore of the system in Mode safe for:

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Enter the Mode Windows safe. Use the arrow keys to navigate and the ENTER key to select Mode

  http://www.computerhope.com/issues/chsafe.htm#03

  ________________________________________________________

  " How to fix the error "your user profile was not loaded correctly! You have been logged on with a temporary profile. "in Vista and Windows 7"

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  This can also help you:

  'Fix a corrupted user profile' in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  See you soon.

• Satellite L750D - cannot connect using the administrator account

  Hello

  I have a Toshiba Satellite L750D-14R and it I cannot access to my administrator account, I had not changed my password or anything either, and, the night before, I had been on that fine and the next day he said my username or password was incorrect.

  I tried to put my password in full about 30 times and he wouldn't so I had to use the account invited to try and find a solution, whenever I connect I try to put my password and it still says the same thing.

  Can someone help me please?

  Someone at - it other access to your laptop? I mean the password cannot be changed without reason.

  Maybe a stupid question now but have you created the recovery disc? Problem is that without this password, you will not be able to install the OS by using recovery image saved on the HARD disk and in the worst case, you must reinstall OS by using the recovery disk.

• Cannot connect to the administrator account because the password is not valid

  Original title: I HAVE VISTA... ALL OF A SUDDEN FOR A DAY, I TRIED TO LOG INTO MY ADMIN PAGE AND MY PASSWORD IS NO LONGER VALID HOW TO RETURN TO THE PAGE OF MY ADMIN WITH ALL MY MUSIC PROGRAMS, ETC.?

  I tried to connect to my admin page and it will not allow my password... helllppp!

  Hi donfamous,
   
  Follow the steps listed in the article given below to resolve this issue:
  What to do if you forget your Windows password
   
  Additional reference on:
  The Windows password problems
   
  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
  For more information, see:
  Microsoft's strategy concerning lost or forgotten passwords

• Cannot connect to the administrator account

  So I have 2 accounts on this laptop, one is mine, we are invited. Both are Standard accounts and it's me to update some programs and browsers limit. I tried to make my administrator account, but whenever I chose to change the button to record it's not stopping me from changing.

  There is an account of homegroupuser on the control panel and it seems that it is the true administrator account, but it does not appear on the logon screen. How to connect on this homegroupuser account and change my personal account for the administrator.

  So I have 2 accounts on this laptop, one is mine, we are invited.

  -> Things to high risk. Your account is the one and only the admin account. What will you do if something is wrong with it? You'll be in diabolical trouble!

  Both are Standard accounts

  -> No, yours is an administrator account. It indicates the Top - see below. You try to promote at the admin level when it is alread at this level. What you need to do is rather to create, test and document a spare emergency admin account.

  

• cannot connect to my administrator account. is no disk to reload, no cd or a flash drive

  Hello, I forgot my password for the administrator can't remember my security answer have disc so I can reload my windows or a floppy disk or a cd, which can make

  Hello

  It is all of the information that we are authorized to issue in these Forums.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  See you soon.

• Cannot connect to the administrator on Cisco ISA570w

  Hello

  I turn on my ISA570w of Cisco at the first time, but I can not connect to manage Cisco's ISA570w.

  I try by default user and password name: cisco/cisco, but unfortunately it does not work.

  Try to factory reset the device by pressing the button for more than 3 seconds reset.  The power/Sys light flashes green when he begins to restart.

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

• Cannot connect on Apex Administration Services

  Hi, I installed APEX 4.2 as it says in the installation guide (and I'm using an Oracle 11 g on a Red Hat). Now, I want to create a workspace. But first, I need to authenticate as an administrator (I changed the password to execution of @apxchpwd.sql). The problem is that it seems that the system does not find the / i /-directory where images, javascript files, css files are located. On the server, the images folder is located in /home/oracle/app/oracle/product/11.2.0/dbhome_1/apex how I change my settings found the directory?

  @apxldimg.sql /home/oracle/app/oracle/product/11.2.0/dbhome_1

• Cannot connect to Essbase Administration Services using the regional service console.

  Hi all!
  
  We work with the Oracle EPM 11.1.2.1 version and a few days ago our hard drive where are installed the oracle tools became full, breaking all my applications. Since then, we were not able to to connect/start of any application, including the WebLogic Server. In the oracle database, I found a papper «logic of starting web» about me They said that the security file is damaged and I followed the steps to recreate the security file (cwallet.sso) and then all the started application works well except the easconsole. When I try to connect it shows the message "failed to connect".
  
  I would like to say that until the drive became fully all my application worked well. It comes to my development environment. My EAS Server works well because I am able to connect using the easconsole of my production environment.
  
  Any idea?
  Thanks since now!
  
  Rafael Melo

  Have you tried to restart EssbaseAdminServices through the weblogic console?

• HP Deskjet 3545: How to reset the password of admin for HP Deskjet 3545. Cannot connect to the administrator settings page.

  I put a password for the printer. And whenever I try to open a session with him, he keeps asking the user name and password. So I want to reset the password or leave the field empty. Please help urgently.

  Hi @flame_ardor,

  Welcome to the Forums of HP Support! I understand you want to reset the password for your HP Deskjet Ink Advantage 3545.

  You should be able to do this by restoring the default network settings in the front panel of the DJ 3545:

  On the printer control panel, press the Wireless button. Wireless menu.

• Cannot connect as administrator can't do anything

  I can not access my account start up only through comments, I am an administrator password that can not do the other day, I changed anything, not even system restore.cannot access to my files or photos and music I am deperate and have tried everything contacted microsoft and no response he made my head in.i having to use the windows account comments someone Please helpme

  Please help me im desperarte

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• I forgot the password cannot connect to any account

  Hello. Recently, my mother reset his password on his desk, and now she has forgotten. Can no longer be in the computer what so ever and are glued to the start screen. Is there a way we can change his password and enter into the computer?

  Thanks for your help!

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft information on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Cannot connect to the foglight suddenly

  Hello

  I was able to connect on foglight without problem in the past.  Currently I get "user has been imported successfully, but you cannot connect until an administrator grants the necessary permissions. Please contact your administrator.

  I get this message without worrying if I try to log in as myself or other AD id, what is the browser, and it also happens when I connect to a remote machine.  All other users can connect fine.  Has anyone ever heard talk about this?

  I also cleared my browser cache and rebooted my workstation.

  Hello cgolla,

  You must ensure that your username has some assigned roles so that you can navigate with vFoglight. It's basically what the message says.

  I assume that you are familiar with the steps to assign roles to a userID in User Administration dashboard in vFoglight.

  Sincerely

• Computer cannot connect after upgrade to win 7

  I have a window of lapop run Dell 7 and after an update, to stop and can not connect the next day the model keep say bad password but the suspicion is correct for my PS. I did not create a password reset disk so now I can't use my computer... MS or someone please help thanks

  Hello

  You will have to return before updates, which is unfortunate.

  See if this helps you; the first part is what you must try as you say you know your password.

  Look at scenario 2

  And you should make a password reset disk before you forgot your password, not afterwards.

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  Note

  AS you can not use your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Essbase Rapid Deployment - 11.1.2.3 - unable to connect to the administration server

  People,

  I downloaded the files required for Essbase and installed with rapid deployment. The installation was successful, and during installation, it is only requested a deployment password.

  Now, I'm trying to connect to the server using the Essbase administration console.

  That's how I'm doing:

  Start > > Oracle EPM System > > Essbase > > Essbase Administration Service > > start the Administration Console Services

  This opens the console, however, when I try to provide the following as the connection information:

  The admin server: name my PC

  Username: admin (when configuring any username as requested)

  Password: password deployment

  I get a "cannot connect to the Administration Server.

  Oracle services seem to work very well in "Services.msc".

  I also tried to start services using "C:\Oracle\user_projects\epmsystem1\bin\startEPMServer.bat". I get this message:

  Sunday, June 22, 2014

  13:09

  From EPMServer.properties

  Apache Ant version 1.7.1 compiled on June 27, 2008

  BuildFile: C:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\instance\sta

  RT.Xml

  Finishing EPMServer.properties

  Sunday, June 22, 2014

  13:09

  I am able to connect to Essbase Studio using this user name and password. However not to the Oracle DB.

  Any help would be appreciated. I'm a newbie when it comes to installation.

  Kind regards

  If it is a rapid deployment and web apps all work on a default port 9000 which means that when you enter the administrator of the server you must enter in the format of servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/