Cannot connect iphone to computer XP

Similar Questions

• Cannot connect iphone 6 JBL j46bt Bluetooth using Bluetooth headsets

  Cannot connect iphone to JBL Bluetooth headset j46bt 6. This morning the iPhone 'seen' the Bluetooth but could not pair. Now, it is not just to find the various. I tried now on the plu button still does not work. Help!

  Just hold the power button longer when you turn on the jbl j46bt helmet, until the led flashes blue and red. After that you should be able to connect to your phone.

• Cannot connect to a computer-hardware crashes

  Hello! Cannot connect to a computer-hardware crashes. Sometimes does not have an optical mouse and mouse with a hard roll on lateral movement.

  Hi fobuss,

  · Which device do you connect?

  · How do you connect devices?

  · Is - this USB device?

  · What is the number and the model of the optical mouse?

  · What is the service pack installed?

  Check if no yellow bang in Device Manager is next to any device. To locate Device Manager:

  a. click on start

  b. Select run

  (c) in the Run dialog box type devmgmt.msc

  d. double-click the device that has a yellow bang

  Try the steps listed in the link below: advanced troubleshooting tips for General USB for Windows XP problems:http://support.microsoft.com/kb/310575

  I suggest you install service pack 3 on your computer, because it has all updates and patches for new pilots.

  You can check the link below:

  Windows XP service pack 3:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect iphone or android smartphone residential wireless. PC running windows 7.

  Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.

  Hi MarvinCohen,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.

  Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.

  See the article for more information.

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot connect iphone 5 itunes store

  Just the last OS installed yesterday evening. Now cannot connect to itunes store. Thin WiFi, date time very well, everything else works fine... not a subscriber of apple's music

  I get the link in the app store for 'visit the itunes store', but nothing happens...

  Thanks for your help!

  Have you tried opening all the app Store iTunes, versus trying to get them through the App Store? I also try to find the link you describe and do not know where you see it. Can you please describe what you see and where you see it a little more clear?

• Lexmark printer s605 all-in-one cannot connect with my computer toshiba laptop with windows 7

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Have you installed the correct drivers for Lexmark?

  Can watch it here where others have observed the you free download , that you need.
  (I assumed Windows 7 64-bit in both cases).

• HC-06 Module Bluetooth cannot connect to the computer

  Hi, I had some problems with my HC-06 Bluetooth Module being unable to connect to my computer. I know that it sends a signal, as I could find on my cell phone, but I can't reach it using bluetooth on my computer. I tried to install Toshiba Bluetooth Stack but installation fails whenever I have try and now I am unable to access the default program Bluetooth in Windows 8.

  This is the Bluetooth Module that I use (connected to an Arduino Dreamer): http://www.amazon.ca/gp/product/B00H07UJL6/ref=ox_ya_os_product_refresh_T1

  And here is the exact specifications of my computer:

  Processor	APU A10 - 5750M AMD with graphics Radeon (TM) HD
  Manufacturer	AMD
  Speed	2.5 GHz
  Number of cores	4
  ID OF THE CENTRAL TREATMENT UNIT	178BFBFF00610F31
  Family	15
  Model	13
  Step by step	1
  Review

  Video card	AMD Radeon HD 8650G
  Manufacturer	ATI
  Chipset	AMD Radeon HD 8650G
  Committed memory	768 MB
  Total memory	4. 0 GB
  Pixel Shader version	5.0
  Vertex Shader version	5.0
  Hardware T & L	Yes
  Vendor ID	1002
  Device ID	990B
  Plug-and-Play ID	VEN_1002 & DEV_990B & SUBSYS_FA861179 & REV_00
  Driver version	12.102.1.3000

  Memory

  7.4 GB

  Operating system	Microsoft Windows 8 (build 9200), 64 - bit
  Service Pack	0
  Size	64 bit
  Edition	Base
  Version	6.2.9200
  Regional settings	1009

  BIOS	1.30
  Version	Insyde Corp.

  . 1.30 Manufacturer Insyde Corp.. Date

  Maximum display resolution

  1600 x 900

  Audio device 1	AMD High Definition Audio Device
  Driver version	8.0.0.8811

  Audio device 2	Conexant HD SmartAudio
  Driver version	8.64.51.51

  DVD	TSSTcorp CDDVDW SU-208DB

  CD	TSSTcorp CDDVDW SU-208DB

  By car
  Size	685,1 GB
  Free	566,3 GB

  Browsers
  Internet Explorer	10.0.9200.17054
  Chrome	36.0.1985.143
  Firefox
  Safari

  Software
  Java	7.0.670
  Flash	14.0.0.176
  DirectX	11.0
  .NET	3.5.30729.4926
  QuickTime
  Adobe PDF Reader	10.0.0.396

  Hello

  You will need to work with the support of the manufacturer of this device and resources of Toshiba. It's like
  Adding a 3rd party radio or an air conditioner to a car and asking the gas and battery support
  problems with them.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot connect iPhone to itunes/photo

  After connecting the iPhone 6 in my MacBook Pro (Mac OS X 10.7.5), I get the following:

  1. iTunes could not connect to the iPhone "iPhone unrel", because an invalid response was received from the device.
  2. Cannot import pictures in the film of "unrel iPhone" because the device is locked with a password.
     • phone is not locked; I unlocked while that plugged and unlocked before connect
  3. Trust this computer?
     • appears on my phone everytime I try to connect

  Only changes I've done since my last backup has been updated to iTunes (12.2.2) and update my iPhone on iOS 10.

  Any help is appreciated and thank you!

  Hey UnRel.

  I understand that you have updated your iPhone to iOS 10 and unable to use the iPhone with your Mac.  I know it's important to be able to use your iPhone with your Mac, so I'm happy to review some information for you.  The latest version of iTunes requires OS X 10.9.5 or later, so you need to update your Mac in order to to use with your iPhone.

  Thank you for using communities of Apple Support.

  See you soon!

• Cannot connect iphone to mac pro 5s after update

  Hi, I have a Mac Pro OS X 10.6.8 6 GB of memory, 25GB available on my hard drive. I did an update to find, and he said that he was unable to find the updates for my computer. I have an iphone 5s who ran out of space, so I recently did a restore and installed iOS 9.2. Once I did, I could not connect my iphone to itunes on my mac, it says it requires a newer version of iTunes, and I need to download the latest version of iTunes. I went to itunes.com and download the last file to iTunes, and he says he couldn't have downloaded the latest version of iTunes, I need to download the latest ios, El Capitan. I went to the app store to download the last iOS El Capitan, and he said "this version of Mac OS X 10.11 cannot be installed on this computer." Does anyone have any suggestions on what I might have missed? I want to be able to connect my iphone to my mac and drag on music and playlists, and I don't want to get a new mac just so I can connect it to my phone.

  Synchronization with an iOS device 9 requires iTunes 12.2 or later. This requires OSX 10.8.5 or later version,

  For Mac Pro desktop computer, which requires a computer desktop Mac Pro 2008 or later version.

  Decommissioning of the iOS version is not supported by Apple

• Cannot connect iPhone 5S for Macbook Pro or what I can't airdrop and seeing the pictures on my phone or other iDevices.

  Hello

  Ive tried many ways to connect my Iphone 5 to my McBook Pro without success and also cannot use the Airdrop feature all. I am running OS X El Capitan Version 10.11.6

  9 s 7-inch MacBook Pro Late 20011,

  Peocwaaoe, Inatel 2.5 Ghz Core I7

  8 GB at 1333 MHz DDR Memorty #.

  Start drive Macintosh HD

  Intel HD Graphics 3000 512 MB graphics

  Serial number C02H3122DV10

  It's the third issue that I had with my MacBook as it has been recently maintained in Greensboro, North Carolina, and he never acted the same. Thank you.

  Back to the place where you have the service of.

• Cannot connect xbox on computer due to LAN problem

  This has been me upset for a few days now and I can understand it so heres the situation.i have a dell pc, dimension 2400 with windows xp sp3 professianal and there is just about a week, I plugged my xbox 360 up to the computer and shared on the network. and it worked without problem, but then I left for a few days and came back and he dident want to work more as soon as I have an internet connection and the xbox live would go only for all four minutes then both would stop at the place where I couldent get internet until I have pingd google. but then once I got to the top and running and I tried again it brings up an error saying.      An error occurred while internet connection sharing was enabled

  Internet connection sharing cannot be enabled.

  A LAN connection is already configured with the ip address

  It is sufficient, for automatic ip addressing

  can anyone help please

  Hello

  Internet connection sharing configures the connection to the local network, the home network or small office network with a static address. There is another network card in the system that is configured with the same address.

  Method 1:

  See the article and check if that helps:

  How to activate the ICS on a home or small office network connection in Windows XP

  http://support.Microsoft.com/kb/314066

  Method 2:

  I suggest return you the item and try to reset the Internet Protocol settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 3:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  See also the link for Xbox support:

  http://support.Xbox.com/en-us/home

• Cannot connect Iphone to wireless network

  Hello Forum,

  I'm new here and would appreciate any help you can provide. I have a Linksys WRT120N that had all of a sudden and unexectedly stopped working after disconnecting my roku box. I don't a not to worry about this until I got an Iphone and now I would really appreciate help because its a lot cheaper to use a wireless connection when on the phone.

  I was able to re-establish the connection Wireless on my netbook today after a ton of research and messing around with the settings and then downloaded magic of network, which finally solved the problem. The problem is that I have no idea how he solved the problem, I think that it automatically sent the WEP key for the Netbook, which is what I'm missing when I try to log on to the network on the Iphone. How can I get this password appears on Network Magic? When I look at the settings, it does not show the actual numbers, that they are hidden.

  Any help would be greatly appreciated!

  olabola wrote:

  Its a netbook and its XP running.

  There is no other way to get the password wireless except for access to the interface of the router. Check with the Network Magic if it will show you the password wireless before attempting to access the interface of the router. Open Network Magic > go to the TASK tab > click on add a device > select computer and you want to connect wireless. If she won't ask you a USB device just click No and it should show you your wireless settings. If this isn't the case, then you will need to access the interface of the router.

  Click on this link and just follow the steps how to access the router and how to check the wireless settings. No need to change anything.

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=67993c06bf0c4b1f9354391f11392bd5_Changing_the_Wire...

• administrator cannot connect to my computer toshiba laptop

  There are 2 accounts on my laptop... me and my husband... I am the administrator, and it is a standard account... today when I tried to open my acct model showed this: the user profile Service has no logon.  User profile cannot be loaded.

  What happened I disconnected and closed as usual last night... why I can't go on.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot connect iphone with itunes

  Hello

  I just bought a new Iphone s 6 pluss, but I can't connect with itunes on my Mac, whenever I plug the usb into my Mac, a window appears and tells me that itunes can't find my iphone because he wants a future verson of itunes. But I have the latest verson of Itunes (12.2.2.25). I tried to reinstall itunes several times and it still shows the same message. However, I can connect my old iphone (5 s) easy way to itunes on mac even. My mac is a macbook air 11 "2011 running on Mac OS X Lion 10.7.5 (11G63b)

  Those who are familiar with the problem, or know how I can fix this?

  Thank you

  You have the latest version of iTunes that can run OS X 10.7.  However, it is not the latest version of iTunes (12.3.2), which is required for the iOS interface 9.

  The issue is that Lion has now more than four years.  You need to upgrade your OS X to launch iTunes 12.3.2.  You need at least OS X 10.8.5 (current is OS X 10.11.2).)

  Install El Capitan (OS X 10.11):

  Update of OS X El Capitan - Apple Support

  Then go to the App Store and update all your applications.

• Cannot connect iPhone and Macbook Pro with AirDrop and bluetooth

  Hello. I recently bought an iPhone 6 and I want to use Airdrop, but I can't find my iPhone on Mac and my Mac on iPhone. When I click bluetooth, then click on connect, it does not connect and on my iPhone it says I should check if my Mac is at hand. And I can not connect with my mac bluetooth to iphone too, it says that I should check if it allowed to connect to the net. I'm on the same wifi and I turned on bluetooth...

  Can someone help me?

  Thank you

  (Sorry for the bad English)

  You do not directly connect using Bluetooth. Read this article on the connection with Airdrop: share content with dropping of your iPhone, iPad, or iPod touch - Apple Support