Cannot connect xbox on computer due to LAN problem

Similar Questions

• Cannot connect to Windows Vista due to password problem

  I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.

  * original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.

  Your only option is to do a clean install of Vista.  There is no free, download of the disk.  Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).

  Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.

  If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot connect to a computer-hardware crashes

  Hello! Cannot connect to a computer-hardware crashes. Sometimes does not have an optical mouse and mouse with a hard roll on lateral movement.

  Hi fobuss,

  · Which device do you connect?

  · How do you connect devices?

  · Is - this USB device?

  · What is the number and the model of the optical mouse?

  · What is the service pack installed?

  Check if no yellow bang in Device Manager is next to any device. To locate Device Manager:

  a. click on start

  b. Select run

  (c) in the Run dialog box type devmgmt.msc

  d. double-click the device that has a yellow bang

  Try the steps listed in the link below: advanced troubleshooting tips for General USB for Windows XP problems:http://support.microsoft.com/kb/310575

  I suggest you install service pack 3 on your computer, because it has all updates and patches for new pilots.

  You can check the link below:

  Windows XP service pack 3:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lexmark printer s605 all-in-one cannot connect with my computer toshiba laptop with windows 7

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Have you installed the correct drivers for Lexmark?

  Can watch it here where others have observed the you free download , that you need.
  (I assumed Windows 7 64-bit in both cases).

• HC-06 Module Bluetooth cannot connect to the computer

  Hi, I had some problems with my HC-06 Bluetooth Module being unable to connect to my computer. I know that it sends a signal, as I could find on my cell phone, but I can't reach it using bluetooth on my computer. I tried to install Toshiba Bluetooth Stack but installation fails whenever I have try and now I am unable to access the default program Bluetooth in Windows 8.

  This is the Bluetooth Module that I use (connected to an Arduino Dreamer): http://www.amazon.ca/gp/product/B00H07UJL6/ref=ox_ya_os_product_refresh_T1

  And here is the exact specifications of my computer:

  Processor	APU A10 - 5750M AMD with graphics Radeon (TM) HD
  Manufacturer	AMD
  Speed	2.5 GHz
  Number of cores	4
  ID OF THE CENTRAL TREATMENT UNIT	178BFBFF00610F31
  Family	15
  Model	13
  Step by step	1
  Review

  Video card	AMD Radeon HD 8650G
  Manufacturer	ATI
  Chipset	AMD Radeon HD 8650G
  Committed memory	768 MB
  Total memory	4. 0 GB
  Pixel Shader version	5.0
  Vertex Shader version	5.0
  Hardware T & L	Yes
  Vendor ID	1002
  Device ID	990B
  Plug-and-Play ID	VEN_1002 & DEV_990B & SUBSYS_FA861179 & REV_00
  Driver version	12.102.1.3000

  Memory

  7.4 GB

  Operating system	Microsoft Windows 8 (build 9200), 64 - bit
  Service Pack	0
  Size	64 bit
  Edition	Base
  Version	6.2.9200
  Regional settings	1009

  BIOS	1.30
  Version	Insyde Corp.

  . 1.30 Manufacturer Insyde Corp.. Date

  Maximum display resolution

  1600 x 900

  Audio device 1	AMD High Definition Audio Device
  Driver version	8.0.0.8811

  Audio device 2	Conexant HD SmartAudio
  Driver version	8.64.51.51

  DVD	TSSTcorp CDDVDW SU-208DB

  CD	TSSTcorp CDDVDW SU-208DB

  By car
  Size	685,1 GB
  Free	566,3 GB

  Browsers
  Internet Explorer	10.0.9200.17054
  Chrome	36.0.1985.143
  Firefox
  Safari

  Software
  Java	7.0.670
  Flash	14.0.0.176
  DirectX	11.0
  .NET	3.5.30729.4926
  QuickTime
  Adobe PDF Reader	10.0.0.396

  Hello

  You will need to work with the support of the manufacturer of this device and resources of Toshiba. It's like
  Adding a 3rd party radio or an air conditioner to a car and asking the gas and battery support
  problems with them.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot connect Xbox 360 Elite to runnings Windows Vista PC

  After surfing the internet for hours, I really need help with this problem...

  I am trying to connect my Xbox 360 Elite to my PC running Windows Vista Home Premium (32 bit).

  I can connect to Xbox Live without any problems, and the Xbox also appears in the network view in Windows (and in WMP11 media sharing).

  The Xbox also discovers the PC and COMPUTERNAME:username display on the screen. But when I try to connect the Xbox since it does not work. I have tried many solutions and advice found on the internet, but I can't work.

  I also tried to use the Media Center and connect the Xbox as an Extender. Does not work either.

  Is there a setting somewhere in Vista that keeps me?

  Hi Christian,

  ·        You receive an error message when you try to connect to the Xbox?

  ·        You are able to access the Xbox from the PC?

  You can try to temporarily disable the security software and third-party firewall on the computer and check if you can access the computer of Xbox. If you are able to access, you can contact the manufacturer of security software and firewall manufacturer to check if you need to change the settings. Subsequently re - activate the firewall and security software after verification.

  You can also post your question on the xbox forum and check if you can find any suggestion that can be tried to solve the problem of connectivity to the xbox. Access the link below to post your question in the Xbox forum.

  http://forums.Xbox.com/

  I hope this helps. Let us know the results.

  Thank you and best regards,
  Srinivas R
  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect iphone to computer XP

  Hi I have an Acer aspire 5600 running on xp. Recently, I tried to connect my iphone 5 and got the blue screen and stop. Microsoft sent an error report indicating that it was due to a driver with a camera problem. When I connected the phone that he began to recognize the iphone then says found still camera. I was not able to locate the pilot to day/delete. I did a registry clean, an update of the driver and reset my computer nothing works. any help would be great. Thank you. Ben

  To use any Apple device with a computer, you must install iTunes and use to move files and media from your device and your computer.

• Cannot connect XBox Media Center PC. Telling me there are problems of connection or firewall issues. Check the windows firewall. I'm a noob to all the rest. Help!

  I checked the windows firewall. Only other thing I'm running is microsoft security essentials. I use At & t UVerse for cable and internet.

  I'm a noob to computer. Help!

  Hello

  · What is the exact error message that you receive with the error code as appropriate?

  You can try the steps listed in the links below and check if it helps: Configure the Windows Media Center Extender Firewall: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/firewall/winfirewall.mspx

  As he tried to connect your console Xbox 360 as a Media Center Extender, you receive the error message: 'Xbox 360 not found': http://support.microsoft.com/kb/911129

• administrator cannot connect to my computer toshiba laptop

  There are 2 accounts on my laptop... me and my husband... I am the administrator, and it is a standard account... today when I tried to open my acct model showed this: the user profile Service has no logon.  User profile cannot be loaded.

  What happened I disconnected and closed as usual last night... why I can't go on.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot connect Windows XP computer to the wireless router

  Original title: why did I have to disable my ethernet on my front XP computers connections all of a sudden they would connect to my wireless network

  I installed a new AT & T wireless router

  Only my Windows 7 laptop would connect to the new wireless router.

  For my XP desktop and the laptop I had to disable the ethernet connections [although no cable not connected] so that the wireless to connect.

  I did it on a whim after days of not being able to connect and many calls to support AT & T.

  Both computers have shown the presence of the network, had 4 or 5 bars and had the right key WAP.

  So what did this happen?  XP update?  Wireless driver update?  The AT & T router?

  I had the problem until I'm the new router, AT & T AT & T could find nothing wrong with the old.

  Their "solution" was to send a new router - Netgear v the Westell, I had for days of Bellsouth.

  Hello

  
  Have you tried to proceed as stated in my previous post?
  If you want to continue to launch other steps, you try to temporarily disable the firewall and check. Check out the following link.
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Note: on disabling firewalls, viruses, or malware can get into the system. After you complete this step of troubleshooting, turn on the firewall.
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then, the firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  Post back with the results.

• Publisher cannot connect XBOX 360 controller wireless receiver PC on Windows 7.

  I can't connect a XBOX 360 controller to my PC with the receiver wireless on Windows 7 (64-bit). I have correctly installed the driver, and the wireless receiver is recognized by the PC. The problem occurs when I try to connect the controller to the receiver, as do not connect or recognize each other. I press the Connect button on the receiver, then the light starts flashing. I then press and hold the connection button on my controller, which makes the quadrants "search for", but they quickly cease, and instead assign a specific quadrant, all quadrants begin to Flash instead, as before. Nothing seems to work, I have tried to unplug all other USB devices and wireless, connecting the receiver to different USB ports and change the batteries. What should I do now?

  Hello

  I suggest that you follow the steps in the article below:

  http://www.Microsoft.com/NZ/DigitalLife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

• Disabled user account and cannot connect to my computer.

  I have Windows XP Media Center.  Unfortunately, I disabled the user account (which I think could be the admin account) for the windows session log and can no longer be beyond the log on screen.  Is any way to re - activate this account so I can access my computer again?

  Hi TimYR,

  Try to boot your pc in safe mode and log in as administrator, you will be able to restore the account.

  I hope this helps.

• Cannot connect to the computer to start

  When I type the password, nothing is registered. This began several weeks ago as intermittent which would resolve after several minutes. Now, after 3 days trying to enter passwd seems to be a permanent situation. Can someone please help. Thanks to a single account of PS user on this computer.

  Thank you very much for your time and effort. Sorry, but I am a fool. Discovered on the wireless keyboard batteries had gone dead. Problem solved. Once again, thanks a lot.

• Cannot connect to the computer.

  I got my old laptop sisters because the mine was kaput, once water is spilled on it. She doesn't remember his password for an administrator account and I can use the guest account, which does not allow me to do things I want to do with my computer. I don't have a reset of ande disk do not have the ability to use an administrator account. In the _ how on MY laptop?

  I got my old laptop sisters because the mine was kaput, once water is spilled on it. She doesn't remember his password for an administrator account and I can use the guest account, which does not allow me to do things I want to do with my computer. I don't have a reset of ande disk do not have the ability to use an administrator account. In the _ how on MY laptop?

  We are not allowed to help the user to recover passwords of the lsot. Sentence may lead to the ban of this forum.
  I'm sorry.
  Read this notice:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  t-4-2

• Cannot connect Photosmart 7510 computer wireless

  I have a Photosmart 7510 with results as follows: connectivity - related - not run settings, - No - FAIL filtering.

  Help, please.

  Set a static IP address on the printer out of range of the router DHCP.   Now try to connect.  If not, disable the security on the router again and try to connect without security.  If successful, go back and add WPA2-AES (pers.) with a simple password to test.  You can connect now?