Cannot connect on 12 C Console - AUTHENTICATION FAILED

Similar Questions

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• BAM connection with jdeveloper authentication failed for Basic realm

  Hi all
  
  
  I'm trying to connect to BAM 11 g, my authentication is correct, but when I try to test the connection I get the error authentication failed for Basic realm = "oracle-bam-webservices.
  
  any ideas on how to solve this problem?
  
  Thank you
  K

  Hello

  Please ask your question on the forum BAM. I guess that they are aware of the possible error messages in their product (at least better that we are)

  Frank

• Authentication failed in the content viewer

  I have a client who cannot log in to the display of the content with its Adobe I.D. so he can't see the project that I have developed for him. When you connect, it gets the message "Authentication failed" dreaded. He used the viewer of content in the past without problem, can connect to Adobe.com, is connected to the Internet, and his account is verified. I even changed his account email address so it would be re - check, but nothing helped. I know that this subject has been discussed here with varying results, but nothing has solved the problem. I tried his account information on my iPad with the same results, but my account works fine. I chatted online and on the phone with technical support, but it was absolutely worthless. He tried not to make a new account, but really, that is not acceptable and does not bode well for a lot of confidence in the product. Thank you.

  Bil

  There is a known problem affecting some customers. Can you send me a private message with the Adobe ID of the person having this problem and I will have a product support person to investigate and solve the problem (there is no they can do I can't for this problem)

  Neil

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot connect to the printer operation failed with error 0x0000007e

  Hello

  OS: Windows 7 x 86 SP1

  Print server: Windows Server 2003 R2 SP2 x 86

  Printer: HP LaserJet 8150 printer shared and listed in the directory

  Problem:

  When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).

  In the Print Service logs, I see the following:

  "The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.

  I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.

  I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.

  When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.

  How can I get Windows 7 clients to use the UPD?

  I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.

  I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• vMotion fails at 9% - Source host cannot connect to the destination host

  Hello

  I wonder if someone could shine any light on why vmotion fails to occur between an ESXi host who has just been restarted, in order to test HA. I have the following configuration:

  3 x ESXi5 DL360 G7s with two 4-way NIC

  VSphere Vcenter 5

  1 x cluster configured for DRS HA

  2 x Procurve 2910 - 24G

  The switches are not connected to each other.

  Both switches are configured as such:

  

  All ports are not marked. NO PLEASE, no routing

  Each host vMotion vSwitch is connected to two switches by 1 x 1 GB nic

  I configured a vswitch on each host of vMotion. There are two ports vmkernel with two IPS on the same subnet. There are two vmnic attached to the vSwitch. On each port, a Vmic is configured to be active while the other is unused. I enabled frames on the vSwitch and 2910 switches. A VLAN has been configured on the two predisposees 2910 for vmotion with frames and defined traffic on "no label". I can successfully vmkping all the ip s vmotion on all ESXi hosts. However, when I test HA by stopping an ESXi host, when I restart the ESXi host I am unable to vmotion in that ESXi host. When I test vmkping I find that the host rebooted can only vmkping itself and no other host can vmkping it. Vmotion attempt fails on 9% and errors with the source host cannot connect to the destination host. If I restart the two switches of 2910 I can then perform a vMotion and the vmkping is a success.

  Help, please?

  Thank you

  lansley2000 wrote:

  I have since read up on the various load balancing options and find that your method is preferable during the method of "ip hash.

  I'll make the change to "port based" and link the two switches

  Hello Simon, I think it's a good option to do, since the hash IP load balancing is a bit special and really requires both interfaces to connect to the same physical switch, which must also have a specific configuration. If you like the results after the new changes.

• Why cannot connect with DB after control DB console configure NetMgr/NetCA?

  People,
  
  Hello. I am running Oracle Database 11 GR 1 material in Oracle Linux 5.
  
  Before you configure Net Manager/Net CA, database https://localhost.localdomain:1158 control console / em, SQL * more and Developer SQL to connect to the Instance of database DB1. All instructions SQL runs correctly.
  
  After Configuration Manager Net/NetCA, all the tools of Admin above cannot connect to the Instance of database DB1 is the only case of DB.
  
  What I've done is added 2 headphones more in Net Manager.
  
  The original listener does not change which properties are: Protocol TCP/IP, Host localhost, Port 1521
  
  Can any folk tell me what causes all the administrative tools cannot connect with DB1 after configure NetManager/NetCA?

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  ORACLE_HOME/bin directory, the command. / sqlplus SYS/SYS used to run correctly after the installation of the database. But after stopping Linux operating system, the command. / SYS/SYS cannot connect with Dabase more sqlplus.

  I think that the command. / emctl start dbconsole should start to the top of the database. Am I wrong?

  NO, you're not correct.

  >

  Is there another way to start the database?

  sqlplus
  / as sysdba
  startup

  as shown below
  BCM@BCM-laptop: ~ $ sqlplus

  SQL * more: Production release 11.2.0.1.0 Sun Jul 17 20:05:09 2011

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: / as sysdba
  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 1553305600 bytes
  Bytes of size 2213656 fixed
  1275070696 variable size bytes
  268435456 buffers of data bytes
  Redo buffers 7585792 bytes
  Mounted database.
  Open database.
  SQL >

• What does "wireless authentication failed because of a time-out" mean?

  Have a combo unit router and modem.  Having two computers.  You can use the wireless that the other cannot use Wired.  Getting messages like "wireless authentication failed because of a time-out," conflict of IP address and canceled due to the delay.  There was a variety of messages.  We had been able to use a router before, but it would be turned off every two hours or more.  Giving the same messages on Windows Vista.  The other computer is Windows XP Motorola
  modem/router.

  Hello

  1. what security WEP, WPA, etc. Do you use?
  2. is the driver software updated for the router to work correctly on Vista computer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  I suggest you to check if you can connect by using a different port or a different router in case the problem is with the router itself.

  Method 2:
  You can also visit the link provided below, which offers a similar problem resolution. Check if the steps to help you resolve the problem.
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/4db4caa0-86bb-4b7b-8aa7-252d5653f063

  It will be useful.

• Authentication failed because the third remote has closed the transport stream

  I am trying to download a zip since an external public server example: https://xyz.com/abc.zip using the webclient.downloadfile () method in an application console, but I end up getting the error below

  "The underlying connection was closed: an unexpected error occurred on a send" and

  "Authentication failed because the third remote has closed the transport stream.

  I tried several solution, but nothing helped. I have no control over the external server. When I manually navigate the link on my browser, I get that download the file, namely the external server is fine and the problem is downloading from the code.

  I tried to put

  System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3; but it does not work.

  Please suggest

  Hi Anil,

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• Radius http authentication fails in 12.2.58 and 15.0.1 to 2960

  Hello

  Find here the extraction of the configuration and debugging sysout.

  The works of radius servers very well with all other accesss like ssh, telnet...

  Just the http access failure.

  This Setup works perfectly with the installed 12.2.55 version before.

  Any idea?

  Best regards.

  Ludovic

  AAA new-model

  AAA authentication login default local radius group

  physical space for AAA authentication login

  AAA authentication login HTTPOnly group local RADIUS

  authorization AAA console

  AAA authorization exec default local radius group

  physical space for AAA authorization exec

  AAA authorization exec HTTPOnly group local RADIUS

  IP http server

  IP 8090 http port

  23 class IP http access

  IP http authentication aaa-authentication connection HTTPOnly

  IP http authentication aaa exec-authorization HTTPOnly

  no ip http secure server

  radius of the IP source interface Vlan1

  Server RADIUS RADIUS-BLX-105

  ipv4 10.151.254.105 address auth-port 1812 acct-port 1813

  transmit 3

  button 7 xxxxxxxxxxxxxx

  !

  Server RADIUS RADIUS-BLX-106

  ipv4 10.151.254.106 address auth-port 1812 acct-port 1813

  button 7 xxxxxxxxxxxxxx

  007482: 19 Aug 10:55:15.207 THIS: auth_proxy_interested_http_packet AUTH-PROXY: config auth-proxy not found

  007483: 19 Aug 10:55:15.216 THIS: Friday, August 19, 2011 08:55:15 GMT 10.159.254.105 auth_required

  Protocol = HTTP/1.1 method = GET

  007484: 19 Aug 10:55:15.216 THIS:

  007485: 19 Aug 10:55:22.355 THIS: auth_proxy_interested_http_packet AUTH-PROXY: config auth-proxy not found

  007486: 19 Aug 10:55:22.363 THIS: the connection HTTP AAA authentication list name: HTTPOnly

  007487: 19 Aug 10:55:22.363 THIS: the connection HTTP AAA authentication list name: HTTPOnly

  007488: 19 Aug 10:55:22.363 THIS: AAA/BIND (00000A7E): link i / f

  007489: 19 Aug 10:55:22.363 THIS: HTTP: failed authentication level 15

  007490: 19 Aug 10:55:24.368 THIS: Friday, August 19, 2011 08:55:24 GMT 10.159.254.105 auth_failed

  Here is a link to a similar question:

  https://supportforums.Cisco.com/thread/2100245

  References a bug ID CSCtq94595

• established - VPN connection, but cannot connect to the server?

  vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4

  Thank you

  ASA Version 8.2 (1)

  !

  hostname ciscoasa5505

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.0.3 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 208.0.0.162 255.255.255.248

  !

  interface Vlan5

  Shutdown

  prior to interface Vlan1

  nameif dmz

  security-level 50

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.0.4 server name

  Server name 208.0.0.11

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service TS-780-tcp - udp

  port-object eq 780

  object-group service Graphon tcp - udp

  port-object eq 491

  Allworx-2088 udp service object-group

  port-object eq 2088

  object-group service allworx-15000 udp

  15000 15511 object-port Beach

  object-group service udp allworx-2088

  port-object eq 2088

  object-group service allworx-5060 udp

  port-object eq sip

  object-group service allworx-8081 tcp

  EQ port 8081 object

  object-group service web-allworx tcp

  EQ object of port 8080

  allworx udp service object-group

  16001 16010 object-port Beach

  object-group service allworx-udp

  object-port range 16384-16393

  object-group service remote tcp - udp

  port-object eq 779

  object-group service billing1 tcp - udp

  EQ object of port 8080

  object-group service billing-1521 tcp - udp

  port-object eq 1521

  object-group service billing-6233 tcp - udp

  6233 6234 object-port Beach

  object-group service billing2-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-777-tcp - udp

  port-object eq 777

  netgroup group of objects

  network-object host 192.168.0.15

  network-object host 192.168.0.4

  object-group service allworx1 tcp - udp

  8080 description

  EQ object of port 8080

  allworx_15000 udp service object-group

  15000 15511 object-port Beach

  allworx_16384 udp service object-group

  object-port range 16384-16393

  DM_INLINE_UDP_1 udp service object-group

  purpose of group allworx_16384

  object-port range 16384 16403

  object-group service allworx-5061 udp

  range of object-port 5061 5062

  object-group service ananit tcp - udp

  port-object eq 880

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq https

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq www

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq www

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777

  outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000

  outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group

  outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0

  Ping list extended access permit icmp any any echo response

  inside_access_in of access allowed any ip an extended list

  permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0

  access-list 1 standard allow 192.168.0.0 255.255.255.0

  pager lines 24

  Enable logging

  logging buffered stored notifications

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool

  192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 1 192.168.0.0 255.255.255.0

  alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255

  public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255

  public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255

  static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1

  Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  http 192.168.0.3 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt noproxyarp inside

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_cryptomap

  card crypto outside_map 1 set pfs

  peer set card crypto outside_map 1 108.0.0.97

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 20 match address outside_20_cryptomap

  card crypto outside_map 20 set pfs

  peer set card crypto outside_map 20 69.0.0.54

  outside_map crypto 20 card value transform-set ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life no

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life no

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  identifying client DHCP-client interface dmz

  dhcpd outside auto_config

  !

  dhcpd address 192.168.0.20 - 192.168.0.50 inside

  dhcpd dns 192.168.0.4 208.0.0.11 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal group anyconnect strategy

  attributes of the strategy group anyconnect

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  SVC request enable

  encrypted olivia Zta1M8bCsJst9NAs password username

  username of graciela CdnZ0hm9o72q6Ddj encrypted password

  tunnel-group 69.0.0.54 type ipsec-l2l

  IPSec-attributes tunnel-group 69.0.0.54

  pre-shared-key *.

  tunnel-group 108.0.0.97 type ipsec-l2l

  IPSec-attributes tunnel-group 108.0.0.97

  pre-shared-key *.

  tunnel-group anyconnect type remote access

  tunnel-group anyconnect General attributes

  remote address pool

  strategy-group-by default anyconnect

  tunnel-group anyconnect webvpn-attributes

  Group-alias anyconnect enable

  !

  Global class-card class

  match default-inspection-traffic

  !

  !

  World-Policy policy-map

  Global category

  inspect the icmp

  !

  service-policy-international policy global

  : end

  ASDM location 208.0.0.164 255.255.255.255 inside

  ASDM location 192.168.0.15 255.255.255.255 inside

  ASDM location 192.168.50.0 255.255.255.0 inside

  ASDM location 192.168.1.0 255.255.255.0 inside

  don't allow no asdm history

  Right now your nat 0 (NAT exemption) follows the access list:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.

  Then try to add an entry to the list of access as:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0

  It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.

• vCenter does not start after the upgrade from 5.1 5.1 U1b (UNIQUE authentication failed)

  Hello

  We have upgrade to vCenter Server (build 880146) 5.1.0a to vCenter Server 5.1. U1b and now vcenter service does not start

  This is the log:

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo (Administrators, true)

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] GetDefaultPrincipal AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetDefaultPrincipal(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot add the default permission: user not found

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot start allow - system has no access rule

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 'Default'] [Auth] initialization failed: < class Vmacore::Authorize:AuthException(Authorize_Exception) >

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error 'authvpxdAuthorize'] could not initialize security

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 WARNING "VpxProfiler"] ServerApp::Start [TotalTime] took ms 27456

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info 'Default'] judgment of VMware VirtualCenter.

  Hello

  VMware support solve my problem:

  We have seen two issues after the update.

  First of all, there is no user of the solution for the virtual center when I checked the application users with SSO to the webclient service administration page.

  Solve us this problem of repointing Virtual Centre to the next according to the kb SSO instance;

  http://KB.VMware.com/kb/2033620

  1. repoint.cmd configure vc - search server https://vcenter.com:7444/lookupservice/sdk - password "laquesea" - openssl-path of the user "admin@System-Domain"-"C:\Program Files\VMware\Infrastructure\Inventory Service\bin."

  After that, the modules in the vpxd.cfg solution was not properly updated and an operation manual.

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.crt

  vCenterServer_251703

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.key

  Above is the corrected version having replaced "null" with the correct path to the files of certificate and key.

  This allowed vcenter service start successfully.