BAM connection with jdeveloper authentication failed for Basic realm

Similar Questions

• Authentication failed for Basic realm = "oracle-bam-webservices" - BAM 11 g

  Hi all
  
  I BAM 11g, im trying to create a connection of BAM of Jdeveloper, but I get this error authentication failed for Basic realm = "oracle-bam-webservices.
  
  I tried boucing the server and rebooting my machine, but I still have the problem. All my authentications are correct. is there a way to get around this?
  
  Thank you
  K

  Hello
  BAM11g is certified with SOA 10.1.3.4 and beyond. Therefore, it is preferable to use JDev 10.1.3.4 and later versions.
  We don't certify with 10.1.3.3 SOA.
  The other thread is BAM connection
  Poyard

• BlackBerry Smartphones trying to connect with the desktop software for my blackberry

  Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

  Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

  Who is? Make sure that you do not mix numbers and letters.

• VPN with AD authentication fails Error 691

  Hello

  I have configured my asa 5510 use AD for authentication of the vpn users.  Although I am using l2tp ipsec I used the following document as a line manager https://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c3c45.shtml#prereq

  .  When testing within the ASDM AD connection is successful.

  .  When you try to connect with a microsoft vpn client I get error 691: the remote connection was denied because the user name and password combination, you have provided is not recognized or the selected authentication protocol is not permitted on the remote access server.  On the vpn client, I have only active MSCHAPv2 and I require encryption.

  .  When debugging ldap 255 running I get the following output

  [26] starting a session
  [26] new application Session, framework 0xd8760198, reqType = authentication
  [26] the fiber began
  [26] Failed: the user name or password is empty
  [26] output fiber Tx = 0 bytes Rx = 0 bytes, status =-3
  [26] end of session

  Before you configure my conncetion VPN profile to use AD, I was able to connect using the LOCAL users.  When connected to the vpn, there is no access to the network.

  Here is the output of conf, see the

  name of host host1
  Select r2.d52YOdvbTM6/l encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 100.100.100.178 255.255.255.240 watch 100.100.100.179
  !
  interface Ethernet0/1
  nameif Inside_1
  security-level 60
  IP 20.20.20.2 255.255.255.0 watch 20.20.20.3
  !
  interface Ethernet0/2
  nameif Inside_2
  security-level 90
  IP 30.30.30.2 255.255.255.0 watch 30.30.30.3
  !
  interface Ethernet0/3
  nameif DMZ
  security-level 30
  IP 10.10.3.2 255.255.255.0 watch 10.10.3.3
  !
  interface Management0/0
  Failover LAN Interface Description
  !
  passive FTP mode
  clock timezone THATS 1
  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
  Standard access list DefaultRAGroup_splitTunnelAcl allow 20.20.20.0 255.255.255.0
  20.20.20.0 IP Access-list extended sheep 255.255.255.0 allow 10.0.5.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  MTU 1500 Inside_1
  MTU 1500 Inside_2
  MTU 1500 DMZ
  IP local pool clientVPNpool 10.0.5.10 - 10.0.5.150 mask 255.255.255.0
  failover
  secondary failover lan unit
  failover lan interface failoverlink Management0/0
  failover interface ip failoverlink 90.0.0.2 255.255.255.0 ensures 90.0.0.3
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global (1 interface external)
  NAT 0 access-list sheep (Inside_1)
  NAT (Inside_1) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 100.100.100.177 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server ActiveDirectory ldap Protocol
  AAA-Server Active Directory (Inside_1) 20.20.20.24
  LDAP-base-dn OU = ouname, DC = domain_name, DC = local
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn CN = cisco, OU = Service accounts, OR = ouname, DC = domain_name, DC = local
  microsoft server type
  the ssh LOCAL console AAA authentication
  Enable http server
  http 20.20.20.0 255.255.255.0 Inside_1
  http 30.30.30.0 255.255.255.0 Inside_2
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set transport mode ESP-AES-256-SHA
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA mode transit
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA
  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  Outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  Telnet timeout 5
  SSH 20.20.20.0 255.255.255.0 Inside_1
  SSH 30.30.30.0 255.255.255.0 Inside_2
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  allow outside
  internal DefaultRAGroup group strategy
  attributes of Group Policy DefaultRAGroup
  value of 20.20.20.24 DNS server 30.30.30.35
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  by default-field value NomDomaine.local
  username password test DLaUiAX3l78qgoB5c7iVNw is encrypted nt
  VPNtest2 password pXVGjB7BA7pQ4yNcDbuXkw user name is nt encrypted
  attributes global-tunnel-group DefaultRAGroup
  address clientVPNpool pool
  ActiveDirectory authentication-server-group
  Group Policy - by default-DefaultRAGroup
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared-key *.
  tunnel-group DefaultRAGroup ppp-attributes
  No chap authentication
  ms-chap-v2 authentication
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the pptp
  World-Policy policy-map
  class inspection_default
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:756efffc44ac8f81f4f377567174c15f
  : end

  Hmmm what DPI only on ASA setting and customer?

  It is obviously one of the possibilities.

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Connection with JDeveloper Sqlite

  Hi guys,.
  
  I'm new to Jdeveloper and I'm trying to connect the app I create to the SQLite. I have installed the SQLite through the data connection wizard. However, when I run it,
  error occurs.
  java.lang.ClassNotFoundException: org.sqlite.JDBC
  
  I tried to search but there is little about the use of oracle and sqlite. Is there any step that I miss when I create the connection. Thank you very much!!!
  
  This is my sample code:
  
  import java.sql.Connection;
  import java.sql.Statement;
  to import java.sql.DriverManager;
  import java.sql.ResultSet;
  import java.sql.SQLException;
  import java.sql.ResultSetMetaData;
  import java.sql.DatabaseMetaData;
  
  public class HelloDatabase
  {
  Public Shared Sub main (String [] args)
  {
  Save the driver
  String sDriverName = "org.sqlite.JDBC";
  Try
  {
  Class.forName (sDriverName);
  }
  catch (System.Exception e)
  {
  System.Err.println (e);
  }
  
  Now we put in place a set of fairly basic string variables to use in the body of the correct code
  String sTempDb = "sample.db."
  String sJdbc = "jdbc:sqlite"; String sDbUrl = sJdbc + ': ' + sTempDb;
  that will produce a Url is legitimate for SqlLite JDBC:
  JDBC:SQLite: Hello .db
  int iTimeout = 30;
  String sMakeTable = "Dummy (digital, answer id text) CREATE table ';
  String sMakeInsert = "INSERT INTO dummy VALUES (1, ' Hello from the database');
  String sMakeSelect = "SELECT a model response."
  Try
  {/ / create a database connection}
  Connection Conn = DriverManager.getConnection (sDbUrl);
  Statement stmt = conn.createStatement ();
  stmt.setQueryTimeout (iTimeout);
  stmt.executeUpdate (sMakeTable);
  stmt.executeUpdate (sMakeInsert); ResultSet rs = stmt.executeQuery (sMakeSelect);
  While (RS. Next())
  {
  String sResultat = rs.getString ("response");
  System.out.println (sResult);
  }
  }
  catch (SQLException e)
  {
  the connection has failed.
  System.Err.println (e);
  }
  }
  
  }

  Add files JAR of Sqlite JDBC driver to project-> libraries and classpath properties.

• Connection with the client VPN for RV110W problem

  Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client.  I was unable to do so, no matter what I try.  Relevant information:

  1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.

  2. internal address of the router: 10.81.208.1

  3. active PPTP.  PPTP server IP address: 10.0.0.1

  4 IP addresses for PPTP clients: 10.0.0.10 - 14

  5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol.  Both are enabled (and Yes, I triple checked passwords)

  6 encryption MPPE and Netbios active.

  7 IPSec, PPTP and L2TP all active gateways.

  8 VPN client: 1.4.1.2

  9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.

  10 home network: 192.168.2.196

  It is causing to tear my hair out.  What Miss me?

  Shannon

  Hi Shannon,

  I am pleased to see that you're progress.

  Shannon Rotz wrote:
  I changed the RM port to 443.  Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed".  How do I get back into the router configuration GUI?
  

  You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address

  With regards to the VPN client:   Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer".  If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding.  Do you want to wait?"  This is definitely progress, since I never got this far before.

  You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here

  On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created.  That connection actually worked, except for one problem:  I can't see the remote network.  If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
  

  Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.

  Answer please if you have any questions.

• RADIUS authentication fails for one of our network device

  5.1 of the ACS is default for authentication authentication Ganymede to the ASA firewall, becomes

  That's what I suspected. You will have to write off the primary secondary ACS. Configure the appropriate ACS secondary clock and time zone to match both domain controllers. Both the change in the clock and time zone change will restart the ACS secondary services for the changes to take effect.

  After you have configured the time comes, we should "Test connection" against AD from the ACS on the secondary interface. As soon as he gets that we can go ahead and save changes and also register for the secondary back to the primary.

  This should solve the problem.

  Kind regards.

• Authentication failed for users of the AD and work for users of OID using OAM 11 G

  Hi all
  
  
  I have deployed an Application in OSH where the doors of the web are installed. In OAM 11 G, I created the Userid as OVD store and created policies for that. and I was able to protect the application.
  
  But authentication works very well for users of the OID. But does not not for users of the AD (saying ID user and password are incorrect)
  
  Part of the OID, AD with TPM. but the AD authentication does not work.
  
  
  could someone help me with this.
  
  
  
  Thank you
  Kiran

  Hi Kiran,

  Check that the name attribute of such user as defined in the Data Source is mapped in TPM attribute AD that you plan to hold the user name. Perhaps, it is use usrprincipalname instead of the samaccountname, or something like that? The oam_server1 - diagnostic.log, or newspapers OVD, may give more clues as to which is the problem.

  Kind regards
  Colin

• OTP-S5100 does not connect with the remote control for Sony App

  When I find devices in the remote for Sony app on my Nokia Lumia 925 blue ray player displays a code on the screen that I'm supposed to get into the app to set up the connection, but I can't find a way to enter this code into the application.  Everything I touch the recording BAROMETER.

  At this point, the media remote is only available on android and iOS.

  If my post answered your question, please mark it as "accept as a Solution.

• Is connection with session variables secure?

  I use email as a primary key and reproducing $MM_Username when connecting with the authentication of the user.
  
  I of course also "password and $MM_UserGroup.»
  
  Is this system secure against piracy?
  
  I know he does not appear in the address bar, but it is possible to modify session variables using the code in the address bar or in any other way?
  
  I have configured groups of users for new records that only allows the account own display (page restrictions) and I don't want someone else under the law computer and freedoms (unless otherwise stated) in order to access the other folders.
  
  Thank you

  "RichardODreamweaver" wrote in message
  News:eutk47$GQA$1@forums. Macromedia.com...
  > Thanks for this Lionstone - I feel much happier.
  >
  > The validation code is in the page index with page restrictions on
  > everything
  > another connection failed.
  >
  > A concern is your point over https. I use a php on http site and
  > don't
  > don't know if it is possible to convert it to https
  >
  > I can only now count on our hosting provider!
  >

  The script on the server side you use has no effect on this.
  Your host likely provides HTTPS with a common certificate for annual fee.
  Do it some, some do not. most do these days, but you'll have to ask them. ;)

• Problem with wireless connection with HP 3070 B611

  I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

  How to change IP address of the printer in the 192.168.0.XXX range?

  It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

  You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

• BlackBerry smartphones this software allows us to connect with blackberry desktop

  Hello. What this software allows us to connect with blackberry desktop? For example, we use for samsung phone samsung kies. Please advice.

  It's the Blackberry Desktop Software. You can download it by visiting the link below.

  http://us.BlackBerry.com/apps-software/desktop/

  Ron

• With Cisco Secure ACS for Windows GANYMEDE +, authentication fails with AD

  I'll put up a Cisco Secure ACS 4.2 server to act as a RADIUS server for switches and routers I use Windows 2003 server for the candidate countries.
  and an Active Directory of Windows 2003 server.  The ad server is very good, it is used for many other things.

  I've implemented ACS as defined nit it installation guide, including all the steps in the "Member Server" section of the installation guide
  When you use AD as an external database (e.g. setting up services to run with a domain administrator account, set up a machine called "CISCO"
  on the field, etc.).

  I've set the unknown user policy to use the database of Windows, if the internal database does not contain the details of the user.

  If I add a user to the internal database, authentication goes through fine, with an entry in the journal "Authentication," spent

  02-24-2010, 05:07:03, authentic failed, eXXXX, Network Administrators (NDG), X.X.X.X, (default), internal error, (get the internal error error message)

  I scoured google etc and just cannot come up with any reason why this should be the case.
  I followed all of the installation to the letter guides.  I need to get this up and running as soon as possible,
  so am eager to know if someone can help me with this one!

  Thanks and greetings

  Sharan

  George,

  Internal error is fairly generic, but a common situation, we see this error is when ACS is installed on a

  64-bit computer.  ACS would not work with the active Manager when it is installed on the 64-bit before machines

  ACS 4.2.1.

  -Jesse

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.