Cannot connect Tecra A9 to my WLan router

Similar Questions

• Satellite L670 - unable to connect to my 802.11n WLAN router

  Hello

  I have a new Satellite L670 with Windows 7 Home Premium. With this laptop I can connect to my network 802.11 g WLAN. Everything works very well. Now I wanted to connect to my 802.11n wlan (router: linksys wrt610n) but it does not work. Laptop can't see the network (ssid) and it does not work if I entered the ssid manually too. The network works with my mac mini perfectly if it is not a failure of the 802.11n.

  I have updated all drivers from the laptop, all the updates that are installed under windows and I tested the driver broadcom broadcom itself (once the driver from toshiba Web site and the other driver from broadcom site) but nothing works. Laptop can't see the ssid and a manual configuration do not work too.

  Can someone help me pls?

  Post edited by: Artanis666

  Post edited by: Artanis666

  Hello

  What Satellite L675 you exactly and what WLAN card there?

  On the Web from Toshiba site, I saw some L675 models they support project t N n

• Cannot connect Tecra M10 to the Internet

  My wife has a TecraM10 with an Intel 82567LM gigabit wired network adapter. It cannot connect to the Internet via either wired LAN by plugging directly into the container of Cat 5 to the rear of the machine or the thorugh a docking station.

  A diagnosis indicates that the LAN switch is turned off and check the manual as to his location to turn it on.

  I can't find a reference to a LAN switch in the manual. I checked TCP/IP protocols and they progress ste correctly and the device manager says it's working properly.

  Any ideas? Thank you. John

  Hello John

  Card LAN installed and listed correctly in the Device Manager?
  >... LAN switch is off
  Laptops doesn t have LAN switch. WLAN spend only so I t understand how you can get this message.

  Please check device manager first and let me know if the network card is OK here?
  When you connect the LAN cable to your Tecra is green LED ON?

  By the way: did you test connecting to the local network using another PC/computer laptop?

• Cannot connect Tecra 8200 wireless network

  I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
  He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
  The laptop uses windows XP with service pack 2.
  Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

  What card Wlan do you use?
  Check Wlan card details in the Device Manager.

  Looks a bit a problem of compatibility between the wireless network card and router.
  Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

  What you could do is update the Wlan driver too.

• Cannot connect Tecra 9000 to wireless network

  Hello

  I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
  The laptop recognizes the hub, but every time I click on connect, I get the same message.

  ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

  I went through a few troubleshooting steps to resolve this problem, but always without success.
  Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

  I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

  Kind regards
  Answer by quoting

  > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
  This may be possible

  The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
  I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
  The wireless network must be always secure

  The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved

• Cannot connect by Satellite A210 of WLan

  Hey,.

  I installed Windows XP on my disk hard of one another. I installed all the drivers, but when im want to connect to my WiFi,
  they say "cannot connect to the W - Lan, W - Lan not scope, or has been turned off. "Try again". Or something like that

  Hello

  You are looking for in this forum for similar issues and proposals of solution?
  Do this! There are enough discussions on these issues.

  What have you already tried to solve this problem?

  I mean that should first be the Wlan.
  Then you should put a right SSI, encryption, and password encryption.

  Did you do that?

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• Cannot connect the Satellite A660 to WLan - card not found Intel

  I unboxed it today and connected to my home wireless network. Everything was fine.
  I propose then my laptop in the living room where the router and the modem is, the connection dies less than a minute or two.
  Then he says that there are no networks in range at all, cannot detect everything.

  I troubleshoot it and the results are: he says: problem with the router / access point is fixed; and another notification that says a network cable is disconnected or may be broken. I have no cable so idk why he tries a wired connection. I reset my router and tried everything.

  I take her back to połączyćto left home in my room and it works fine, no drop outs.
  It's all new, satellite a66. I made sure that my data was on and the wifi is good.

  Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...

  Thank you.

  JD

  > Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...
  Because of this message, I would recommend checking the status of the WiFi (WLan card) adapter in Device Manager.
  You could uninstall the WLan driver in Device Manager.
  Then you need to download the latest driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  and should install the new drivers.
  Reconfigure the Wlan connection and test functionality.

  PS: Please make sure that the WiFi was enabled (FN + F8) before trying to set up the connection.

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• Cannot connect to the nintendo wii wireless router

  Original title: WiFi

  IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.

  Hello
  You try to connect the nintendo Wii to router or laptop?
  
  Try this:

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '.

  3. click 'Connection settings', and then select a connection that marked 'None '.

  4. Select "Wireless connection" and "Access Point search."

  5. choose what access point to connect to, then click on 'OK '.

  Manual installation

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.

  3. choose "Wireless connection" and "Manual Configuration".

  4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.

  5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.

  6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.

  7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.

  8. choose 'Save' and 'OK '. Select 'OK' to test the connection.

  If this does not work, contact nintendo for best support.

  Online connection support

  http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp

  Troubleshooting wireless router

  http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot connect to all games online with router Linksys, (WTR54G)

  I've tried everything, and this problem is fairly recent. I can run the internet just fine, but when it comes to connect with STEAM or any other multiplayer games, simply don't connect. I tried to take on the walls of fire and port forwarding. I also tried to use a static IP address, nothing. I have seen many others with this problem and they never have the problem sloved. Hope you can help me.

  Called my brother and fix the problem, it is the COMODO. Even when you turn it off it always runs in the background and it does not leave out all connections. Linksys should have thought of that after that they told me 500 different things.

• Cannot connect by Satellite A30 to WLan

  Hello

  I bought used Satellite A30 for girl - can't get wireless hub.

  Can someone help please with requirements/updates at necessary level for this?

  Man thanks and greetings

  Have you checked if your laptop Satellite A30 was equipped with the LAN card internal minPCI?

  Go to Device Manager and expand network adapters area.
  The wireless network card must be included if it is available.

• HP 6980 printer - cannot connect wireless with the new modem/router

  
  

  You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

   

• Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

  Hello

  I hope someone can help as Im pulling my hair out. Just replace an old Wireless ADSL router/modem to a "n" wireless Netgear DGND 3300 range Max Dual Band router ADSL. Everything is connected by ethernet to my Office PC Ok. Just bought a laptop L500-1WG with 'n.' compatible wireless card

  Hope to connect to the 802 1.1n 5 Ghz to speed things up and increase will however the laptop cannot find the adapter 2.4 Ghz 'G' and its driving me wild! Ive downloaded the latest drivers and checked in the device manager that "n" is selected. I messed around with the settings of the modem to the router and it seems to all be OK but can not connect, someone at - it ideas? Thought I would have the ability to connect via G or N...

  Your help is appreciated...

  And what is with the settings of the WLAN router? You are using auto option or you have assigned it N only?

• Satellite P200 - unable to connect to the WLAN router

  I have a Satellite P200 and that you have upgraded from Vista to Windows 7.

  The wireless is working and to see available networks, but trying to connect it does not ask the WEP key, it just says: he has a connection problem and (possibly) says that it cannot connect.

  Someone at - it clues on this?

  Thank you.

  Hello!

  It's really strange Mavourneen. I also have Windows 7 on my Toshiba laptop, but I put t have problems to connect to my router WLAN. Everything works fine on it.

  Can I ask you if you tried to update the driver WLAN? You can download the latest version here:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tried to update the BIOS?