cannot connect to ipsec between ASA5515 to cisco891
I'm trying to connect ipsec between ASA5515 to cisco891, more cisco3825.
ASA5515's version (8.6).
cisco891 is ios (15.4).
CISCO3825 is ios (15.1).
In, cisco891.
do not type 'card crypto' next 'set the peer address' and 'mach '.
Cisco3825.
error message "MM_WAIT_MSG3" then stops.
How to connect to ipsec?
Hello
IF on the cisco 891 router, you try to type the commands "Crypto" , and it does not work, make sure that you have a security K9 license so you will be able to use the security features, you can check this with--> them show version.
Now on the cisco 3825:
The MM_WAIT_MSG3 receiver is return his policy IKE initiator. Initiator sends BA/hash/dh ike policy details to create the first contact. Initiator will wait at MM_WAIT_MSG2 he hears of his peers. Hang ups here can also be due to offset device vendors, a router with a firewall in the way, or even ASA version incompatibilities.
-While the IKE encryption on the router and on the SAA strategy? Are they match?
Please go ahead and fix the show tech 3 devices so I can give you the relevant measures and controls to achieve this!
Please don't forget to rate and score as correct the helpful post!
Kind regards
David Castro,
Tags: Cisco Support
Similar Questions
-
"How can I fix the iCloud" you cannot connect at this time "error?
I noticed that I was not able to view my use iCloud on my MacBook Pro. To try to solve the problem, I registered on iCloud, but now I'm more able to sign in - it displays you cannot connect at this time. Try to connect again. In addition, I was not able to install anything from the App Store for about a day because it asks me my Apple ID and password and perpetually displays the activity indicator:
Playlists and iCloud tabs are not sync between my Mac and iPhone 6 s either. Strangely, Messages and FaceTime are signed in and it works properly.
So far, I tried to remove my iCloud Keychain password and delete the folder ~/Library/Application Support/iCloud/accounts - both without success.
I wanted to create a new Apple ID to test a fresh user, however, create Apple ID link is grayed out and unclickable:
To summarize:
- I can not connect on my iCloud account.
- Playlists and iCloud tabs are not synchronized.
- I can't download anything from the App Store.
- I'm not able to create a new Apple ID from my Mac.
- Messages and FaceTime are not affected and are still connected.
- I tried to remove my iCloud Keychain entry and folder in account iCloud, without success.
What else can I try? I haven't installed any antivirus software and know that I have not downloaded something fishy to cause a virus problem or malware.
Try to create a new ID here.
-
Cannot connect to the integrated Web server
I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!
If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.
You mentioned that you must change the IP address. What is the reason for this change? The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?
I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection. You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address. Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.
-
Cannot connect my Sony Ericsson C905 with adapter Bluetooth Toshiba
Hello!
I just bought a Toshiba Bluetooth adapter v2.1 + EDR and I use Windows XP. I installed the driver as in the manual, but I have a problem with the connection between my Sony Ericsson C905 and bluetooth. Bluetooth detects the phone, but it cannot connect to it.
What is the problem? :'(
Find the solution here:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50192&TSTART=0 -
Cannot connect to the Family Safety website
I'm sorry if I posted this in the wrong place, but Family Safety does not appear as a product of Windows Essentials...
MOD: It's because he was transferred on Windows forums. I have moved your question to you
Quesiton:
For some reason I can't connect to the Web page for the family (https://familysafety.microsoft.com/) security controls
I see the browser tries to do something, it passes between the two following URLS 3 - 4 times before giving up.
https://Familysafety.Microsoft.com/?WA=wsignin1.0
https://login.live.com/login.SRF?WA=wsignin1.0&rpsnv=12&CT=1408500875&RVER=6.4.6456.0&WP=SAPI&wreply=https:%2f%2Ffamilysafety.Microsoft.com%2f%3Fwa%3Dwsignin1.0&LC=3081&ID=286847
When he does not get the following error message;
"Connect: something was wrong and we cannot connect you right now." "Please try again later".
There is not much other info on the Web page other than an image of laptop with 'your account, our priority '.
I tried to log in security for the family for 24 hours now with the same result every time.
I tried to use the browsers Internet Explorer, Mozilla & Chrome, same result every time. I tried two different places, home and work.
My e-mail and password are correct; I can connect to mail.live.com using the same credentials which, whatever the reason, still works.
Only, I can't access security controls for the family on the Web site.
Anyone have any ideas?
Matthew
Well, I reacted to the error description of the psionic with a known antidote to the symptoms he describes. This is clearly not the solution in this case, I went hunting and found dozens of threads on exactly the same problem. The solution the most common seems to involve logging on http://profile.live.com with the FS username and password, then using the change at the top button on the left to enter your first and last name. If you are already connected to another account, you must do it in a new browser session, for example in mode InPrivate of Internet Explorer.
-
I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.
I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
Any suggestions or solutions to this problem?Thank you
ChuckHi Chuck
Your question is addressed in the Microsoft Answers forums.
Please ask your question in the following forum.
Small Business Server Forum:
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Concerning
-
Excellent signal, but cannot connect to the wireless network
XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.
Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.
-
Help! Setup Wizard cannot connect to the router!
I tried several times to install this router wireless MO # BEFW11S4.
I get an error message that Setup Wizard cannot connect to the router!
I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.
After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.
How to solve problems, or isolate the problem as a bad router?
Please send me a PM for any suggestions or help.
Thxx
(Note to mod: Email address removed.)
Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.
Thank you! Problem has been resolved.
-
Site IPSec between RPS and IOS.
Hello
I really hope that Andrew Hickman, author of DOC-16927 and DOC-23028 can help with this.
I created a Site to IPSec VPN between our SRP527W-U and CISCO881-K9 (SRI) running IOS 15.0 (1) M3.
It is the first branch to use a PRV. I use a card dynamic encryption (that we have more than one branch, and ESP was a dynamic public IP address).
Our other branch (also runs an international search report) is a GRE over IPSec VPN, traffic between subnets it passes over the GRE tunnel. It works very well. The goal here is really to achieve the same (GRE over IPSec) between the SRP and the SRI. Similar to our other branch.
The ISAKMP and IPSec on SRI config:
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key SECRET KEY address 0.0.0.0 0.0.0.0
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
crypto dynamic-map DynMap1 10
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address VPN
QoS before filing
card crypto 10 Vpn1-isakmp dynamic ipsec DynMap1
list of IP - VPN access scope
allow accord host
host ip permit 172.16.0.0 0.0.0.255 172.16.2.0 0.0.0.255
interface FastEthernet4
IP address
255.255.255.252 card crypto Vpn1
Router A - CISCO881-K9 (hub) Router B - SRP527W-U (speak) Network: 172.16.0.0/24 Network: 172.16.2.0/24 LAN IP: 172.16.0.1 LAN IP: 172.16.2.1 WAN IP: 203.174.188.58 WAN: Starting from a host in the 172.16.2.0/24 subnet, I ping SRI (172.16.0.1) and hosts on the 172.16.0.0/24, but not the PRS (172.16.2.1) under Diagnostics-> Ping Test.
Starting from a host on the subnet 172.16.0.0/24, I ping a host on the 172.16.2.0/24 network, but not the RPS (172.16.2.1). I can confirm SPI Firewall Protection is off and filter Internet requests anonymous check box is cleared.
While Sri (172.16.0.1), I can not ping RPS (172.16.2.1) or all the 172.16.2.0/24 subnet hosts.
Summary of Ping results
The host subnet a host <-->subnet B: Yes
A <-->B router the subnet host: No.
Router, the host of a-> B subnet: No.
Router a router <-->B: No.
Hosts on the subnet B-> A router: Yes
SRI routing table
* 0.0.0.0/0 [1/0] via
10.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Tunnel0
L 10.0.0.1/32 is directly connected, Tunnel0
172.16.0.0/16 is variably divided into subnets, 3 subnets, 2 masks
C 172.16.0.0/24 is directly connected, Vlan1
L 172.16.0.1/32 is directly connected, Vlan1
S 172.16.1.0/24 [1/0] via 10.0.0.2
The RPS routing table-->-->-->
10.64.64.74 255.255.255.255 -- ppp10 10.64.64.74 255.255.255.255 -- ipsec0 172.16.2.0 255.255.255.0 -- VLAN.1 172.16.0.0 255.255.255.0 10.64.64.74 ipsec0 0.0.0.0 0.0.0.0 10.64.64.74 ppp10 I suspect it's an ACL / route question. I would gladly of assistance from anyone. According to me, that I'm so close, just not there.
Thank you very much
Trent Renshaw
Hi Trent,
My apologies, I misread your first post - I thought that you were talking about the question of access and the IP address of the PRS via IPSec (that part is fixed).
I fear for your real question, there is no answer. The SRP500 does not support GRE over IPSec (just one or the other).
Kind regards
Andy
-
SIP: Failure cannot connect to...
Hello
I just got a Quickset SX20 video system for my business. Therefore, I created a SIP account with access to the server of proxy to 'getonsip '.
I went into my settings on the SIP configuration, but I got this error: "Failed: unable to connect to 69.57.179.234:5060" as you can see in this screenshot:
Here is my system SIP configuration:
I opened port 5060 for TCP/UDP protocol on my firewall. IP address of the proxy is getonsip.com, they gave me a free Sip account. I tried other free providers, but it never worked once! (I have always sort of various errors, such as DNS or something...)
Thank you very much.
Why? Firstly your end point says that it cannot connect, check the error you posted yourself.
So, if you try to connect to the ip address you have posted at least from here only get a connection refused
$ nmap -sT -p 5060,5061 69.57.179.234
Starting Nmap 5.00 ( http://nmap.org ) at 2013-07-05 15:58 CEST
Interesting ports on nile2.junctionnetworks.com (69.57.179.234):
PORT STATE SERVICE
5060/tcp closed sip
5061/tcp closed sip-tls
Nmap done: 1 IP address (1 host up) scanned in 0.80 seconds
Some thoughts of othe:
* even if it is a "sip" supplier could not provide all the necessary capabilities for video
* If you need NAT traversal problems could place
Difference can be the feature, service, features, functionality, stability, location...
Like today, you have a problem with the supplier then ask them to fix it so that everything works for you ;-)
Cordially capabilities, a lot of video-conference calls are always placed on h323, real
video providers will probably offer you transparent connections supporting h323 and sip
and interoperability between the two.
Location/features: in some scenarios (as your endpoint is behind a nat) media may need to be
supported by the provider. This means that they must support video media that is quite
intense bandwidth, so don't not even support that (apart from technical limitations such as the sharing of content/bfcp).
Also depending on where you are and the provider, you can add delay substential.
Like nothings free, ask yourself what is the reason behind this provider to offer the service
I'm not saying that you will not find any provider of good and free and functional, but at least I'm not aware of anything.
Please note the answers using the stars below and set it to the response if it is.
-
Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.
Hi MarvinCohen,
Thanks for posting your question in the Microsoft Community forums.
I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.
Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.
See the article for more information.
Home Sweet homegroup
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-wayLet us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Windows 7 cannot connect to internet Bootcamp
Hi all! Now, I know that there have been many discussions going around all sorts of places on this issue, but the sad part is that I could not well answer truly adapted to my situation. So first off, I got my windows 7 with bootcamp on my macbook 13' pro a week ago and the internet worked perfectly well. But I had problems putting games on the windows section, so I removed the partition and re-bootcamped windows 7 once again. This time, my game worked perfectly, but now internet cannot connect at all. The only difference between the different times that I partitioned the laptop, this is the second time that I actually put the OS disk in because the first time I forgot. If all the drivers and others have been installed at the second time around.
When I try to connect to the internet and troubleshooting it said only that "wireless isn't a valid IP configuration" I do not completely understand. And the funny thing is that I have about 3 other computers using the same router everything on windows 7 with absolutely no problem. I tried rebooting the machine and the router, enter the network name and password manually, refresh and reversing the network card and a few other unnecessary things. However, I don't have a Hello on my computer and I don't know if I really needed, because it seems like that was a problem.
Sorry for the words really not technical, but I am not that computer savvy, especially with regard to such things. I'd appreciate any help, thank you in advance!
You have installed the Windows drivers instead of Apple's Boot Camp drivers. Start with step 18:
MS - MVP - Elephant Boy computers - don't panic!
-
established - VPN connection, but cannot connect to the server?
vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4
Thank you
ASA Version 8.2 (1)
!
hostname ciscoasa5505
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.0.3 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 208.0.0.162 255.255.255.248
!
interface Vlan5
Shutdown
prior to interface Vlan1
nameif dmz
security-level 50
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS lookup field inside
DNS server-group DefaultDNS
192.168.0.4 server name
Server name 208.0.0.11
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service TS-780-tcp - udp
port-object eq 780
object-group service Graphon tcp - udp
port-object eq 491
Allworx-2088 udp service object-group
port-object eq 2088
object-group service allworx-15000 udp
15000 15511 object-port Beach
object-group service udp allworx-2088
port-object eq 2088
object-group service allworx-5060 udp
port-object eq sip
object-group service allworx-8081 tcp
EQ port 8081 object
object-group service web-allworx tcp
EQ object of port 8080
allworx udp service object-group
16001 16010 object-port Beach
object-group service allworx-udp
object-port range 16384-16393
object-group service remote tcp - udp
port-object eq 779
object-group service billing1 tcp - udp
EQ object of port 8080
object-group service billing-1521 tcp - udp
port-object eq 1521
object-group service billing-6233 tcp - udp
6233 6234 object-port Beach
object-group service billing2-3389 tcp - udp
EQ port 3389 object
object-group service olivia-3389 tcp - udp
EQ port 3389 object
object-group service olivia-777-tcp - udp
port-object eq 777
netgroup group of objects
network-object host 192.168.0.15
network-object host 192.168.0.4
object-group service allworx1 tcp - udp
8080 description
EQ object of port 8080
allworx_15000 udp service object-group
15000 15511 object-port Beach
allworx_16384 udp service object-group
object-port range 16384-16393
DM_INLINE_UDP_1 udp service object-group
purpose of group allworx_16384
object-port range 16384 16403
object-group service allworx-5061 udp
range of object-port 5061 5062
object-group service ananit tcp - udp
port-object eq 880
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389
outside_access_in list extended access permit tcp any host 208.0.0.164 eq https
outside_access_in list extended access permit tcp any host 208.0.0.164 eq www
outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field
outside_access_in list extended access permit tcp any host 208.0.0.162 eq www
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group
outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777
outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000
outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group
outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0
Ping list extended access permit icmp any any echo response
inside_access_in of access allowed any ip an extended list
permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
access-list 1 standard allow 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
logging buffered stored notifications
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool
192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 1 192.168.0.0 255.255.255.0
alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255
public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255
public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255
static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1
Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.255.0 inside
http 192.168.0.3 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt noproxyarp inside
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 108.0.0.97
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
peer set card crypto outside_map 20 69.0.0.54
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 1
life no
Telnet timeout 5
SSH timeout 5
Console timeout 0
identifying client DHCP-client interface dmz
dhcpd outside auto_config
!
dhcpd address 192.168.0.20 - 192.168.0.50 inside
dhcpd dns 192.168.0.4 208.0.0.11 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal group anyconnect strategy
attributes of the strategy group anyconnect
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
SVC request enable
encrypted olivia Zta1M8bCsJst9NAs password username
username of graciela CdnZ0hm9o72q6Ddj encrypted password
tunnel-group 69.0.0.54 type ipsec-l2l
IPSec-attributes tunnel-group 69.0.0.54
pre-shared-key *.
tunnel-group 108.0.0.97 type ipsec-l2l
IPSec-attributes tunnel-group 108.0.0.97
pre-shared-key *.
tunnel-group anyconnect type remote access
tunnel-group anyconnect General attributes
remote address pool
strategy-group-by default anyconnect
tunnel-group anyconnect webvpn-attributes
Group-alias anyconnect enable
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the icmp
!
service-policy-international policy global
: end
ASDM location 208.0.0.164 255.255.255.255 inside
ASDM location 192.168.0.15 255.255.255.255 inside
ASDM location 192.168.50.0 255.255.255.0 inside
ASDM location 192.168.1.0 255.255.255.0 inside
don't allow no asdm history
Right now your nat 0 (NAT exemption) follows the access list:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.
Then try to add an entry to the list of access as:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0
It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.
-
Why other computers cannot connect to the internet with my ad - hoc connection?
Hi all! Here's my situation.
My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
We have only an Ethernet however.Here's my situation.
I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.But here's the kicker, when I don't put no security on the network, everything works fine.
How do I create an ad hoc ICS with security network and have not really work?
Thank you guys!Hello
Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!
Before I continue, I would like to collect some personal information on the issue.
1. what security software is installed on your computer?
2. share your protected password put on or off?
The sharing tab is not available if you have only a WLAN card.
Method 1:
Follow the link below and set the ad hoc network.
Set up a computer-to-computer (ad hoc) network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network
Set up a wireless network without router
Method 2:
After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).
(a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.
(b) click on the connections tab, and then click never establish a connection.
(c) click on LAN settings.
(d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .
(e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.
If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.
Method 3:
Follow these steps and check if that helps.
(a) click Start, type Control Panel in the search box, press ENTER.
(b) click on network and sharing Center, click change advanced sharing settings in the left pane.
(c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.
(d) select (dot), turn on password protected sharing.
Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
More information on:
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Reply back with the results. I'd be happy to help you further.
-
Cannot connect to all accounts under windows 7 Professional. Too locked admin account.
I'm trying to connect my Windows 7 Professional computer. Normally, it ignores the screens account all together and auto connects when I turn on the computer. My account has no password. Today, when I booted up it he went into a log on screen with my account and 'another user' option I've ever seen elsewhere. I can't log in to my account. When I try it says he said: "you cannot connect because the ögon method you use is not allowed on this computer. See your network administrator for more information." There are no other accounts on this computer and I have an account admin is there something I can do? I can't do everything. Thank you!
Hello
-You're on a domain network?
-Have there been any changes made on the computer before the show?
-What happen when you try to connect through the other user? You are able to boot to the desktop?
I would suggest trying the following steps and check.
Case 1: Group Policy "" Allow the local newspaper"was not set up to allow users or users of the domain. Configuration allow users or domain users to connect to the computer or the domain, you must add users or users of the area to "allow the local newspaper. Please follow these steps to add users.
1. Run gpedit.msc.
2. expand Configuration ordinateur\parametres securite\strategies windows\parametres
3. click on user rights assignment
4 4 veiller ensure that "Allow the local newspaper" includes administrators, backup
Operators, domain users or users.Case 2: Group Policy "'Deny log on locally' has been installed to deny users or users of the domain. For the installer allow users or users in the domain to connect to the computer or local domain, "Deny log on locally" must be empty or no user or users of the domain in the list. Please follow these steps to remove users or users of the domain of the 'Deny log on locally '.
1. Run gpedit.msc.
2. expand Windows Settings\Security Settings\Local Policies
3. click on user rights assignment
4. make sure that "Deny log on locally" is empty.Case 3: Local group policy allow for user logon. However, group policy domain that overrides the local policy does not allow users to log on locally. The resolution is to modify the domain policy to allow users to log on locally.
Case 4: The domain policy allows domain users to log on locally, but is not the local policy and domain policy does not apply to the computer. The fix is running gpupdate to force the update of the domain policy.
Case 5: Norton Firewall blocks communications between the domain controller and the client. The solution is to disable Norton firewall or reconfigure to grant access to the domain controller.
It will be useful.
Maybe you are looking for
-
Create a filter to any message where the subject is empty
When a message with no subject is received in my Inbox, I want to put a filter to move it to another folder. There seems to be no way to create a "subject contains" with the empty text box. The filter will not work on a test message.
-
Yahoo email program works normally. All my files and email addresses are still there, but there is no 'Rickeasslmeir56' e-mail nor was he ever
-
Satellite Pro L450 - 17K - expandability RAM and HARD drive
Can someone help me find out what the actual amount of system ram memory can be installed using windows 7 64 bit? As far as I can tell it is 4 GB or more? What is "more"? What of the hard disk, what is the maximum size that I am able to install and f
-
connectivity Wi - Fi T430S problem
Hello I have problem with wi - fi on my Lenovo T430s. Wi - fi only does not show, there is only the bluetooth radio. I not found any solution to this. Restart or new drivers does not work. The only solution is to send it to the service? Thx for the a
-
I tried three times to install a program of music SRSHD services and each time I get "error 1920 check privaleges sufficient to start system services. I am the only owner and operator of this computer and I wonder how to install this program. I would