Cannot connect to the DRS Applications
I have recently connected to the unit and noticed that there is backup failure messages. I have tried to connect to the newspaper Drs It by but crashes then never completely gets up and leaves the window. I tried to restart the services, and that has not changed the behavior. Help!
I would go ahead and restart the following services. Local to Cisco and Cisco Master DRF DRF.
Please evaluate the useful messages.
Tags: Cisco Support
Similar Questions
-
Flash Builder debugger cannot connect to the running application
I've upgraded to Flash Builder 4.5 and now I get the error - old
The Flash Builder debugger cannot connect to the running application.
Ensure that:
1. for applications in the browser, you run the debug version of Flash Player.
2. for network debugging on a mobile device, you have a reliable network of the device connection and 7935 port is open on the firewall of your machine.
Device connection helpI get both on the Simulator (which is being upgraded to the latest version) and try to debug on my real playbook. There are a few other forums of discussion about this that suggest that the default Debug host IP is the usual culprit. However, which is set up correctly. I also added port 7935 firewall.
I am able to ping ip address of my playbook without problem. Any other thoughts on what I might have configured wrong?
Flash Builder 4.5 uses Air 2.6 for iphone and Android, for the moment, we can use only Air 2.5, so the compiler needs a couple of parameters. You have in the ActionScript Preferences tab build package-advanced - forceAirVersion 2.5 and under ActionScript compiler an extra line - swf-version 10
-
The Flash Builder debugger cannot connect to the running application
Good evening everyone. I installed my signature key, debugging debugging keys and transferred my token to the device and everything seems good, no errors except when I try and debug an application on my device. I click on debug, and it says it's installation. The app looks like it's opening on my device but closes immediately. The FB debugger continues to say "pending to connect to the running application". The icon is on my device but when I try to run it it opens and then closes immediately. I use the software 1.0.2 SDK.
How about configuration in the app.xml file or the XML of BB? Because you are running 4.5, you have the parameters of the solution defined to force AIR 2.5 and Flash 10?
-
Cannot connect to the creative Application of cloud
Cannot connect to creative Application of cloud. My works of username and password very well when I connect via a browser, but when I want to connect through the application on my iMac, it accepts not the exact same password and user name. I can't even uninstall creative cloud of the iMac because he asked my user name and password, that it does not accept. Please help, I'm a little more bald every minute, it does not work
Hello
It will be your password for the computer. The password that you connect to your computer.
Kind regards
Hervé Khare
-
Cannot connect to the printer application
I have access to and use all of the applications on my OfficeJet Pro, except for "On Demand" 8610 When I choose at the request of the printer, a screen to Log In just ask Email and password. Fill these fields with my HP account e-mail address and passowrd, but when I press "Login", it says "incorrect entery. Please try again. »
This require a different password? Why is it not work?
Thank you.
Hi @mikedog
Thank you for taking the time to answer.
If you send to the printer use ePrint printer email print job prints without you being there. With sweater print when you send the print job will stay in your print queue print pull until you connect to a printer to support (for example your Officejet 8610) and choose to print the document. The document will automatically delete after 3 days, if you printed the work or not.
I do not recommend that if you have questions about JetAdvantage from HP that you post on the HP JetAdvantage Support Forum-Forum on the sales of HP Support Forums.
-
Hi, Im on a Mac, always on the Mavericks.
I was not able to connect via application creative cloud for a while. I just saw a blue spining wheel which never loads.
I disconnected my Mac account and logged back with another user of Mac and the creative cloud app account worked...
but when I log in on my own account, it does not work...
I can not uninstall and reinstall because I have older versions of Adobe Photoshop and Illustrator box and
When I try to uninstall the application it tells me that this is impossible because I have a software that needs it.
Monica
Mac https://forums.adobe.com/message/5470608 spinning wheel
-
The blackBerry Smartphones No. MMS option and cannot connect to the application server
Good evening
For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.
The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.
Any help?
Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.
Hello!
I suggest the following:
(1) registry HRT
- Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now
(2) Service reference books
- KB02830 Send the directories for the BlackBerry Internet Service
(3) restart to take batt
- Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.
Good luck and let us know!
-
iPhone cannot connect to the server to iCloud
Hello!
My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.
WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.
His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.
I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).
Any help much appreciated!
Does anyone have advice at all...? Aside from throwing the thing?
-
Your computer cannot connect to the remote computer
Hello
OT:
Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.
I implement the remote desktop session based on Win Server R2 2012.
I create a free sign for certificate certificate and also install the certificate to the client computer.
But when I click on any application it shows me error.
Hello
You may need to ask the question on the TechNet forums. Please post the question here:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
Kind regards
-
"Cannot connect to the network." When you enter the correct password for wireless network
Hello
I have the HP Photosmart C7200 all-in-One series.
This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem. I have a Verizon FiOS (Actiontec) router. I am trying to connect to it wireless; the network key is using WPA authentication. I followed all the instructions in the quick start guide.
My printer detects my network and application authentication key. I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network. I know that my key is correct; I connect to my router very well through several laptops, PDA, etc. I have reset the settings network default manufacturer and tried without success.
I don't know what kind of trouble shooting I'm supposed to do here. The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.
Your help is greatly appreciated.
Edit: I printed the test report wireless network, here are the results:
Radio on PASS
The radio work PASS
Ethernet cable not plugged in PASS
Network name (SSID found) PASS
Security PASS
The printer settings compatible with the configuration of the wireless router PASS
No filtering IN CASE OF FAILURE
Connected Not work
The signal strength Very low
Other networks detected matching you the network name (SSID) NO.
I know this sounds strange, but try changing channel by channel 11 of the wireless router.
-
I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find. I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?
Hi ptkein,
Thanks for posting your question on the Forums of Windows Vista.
Option 1: You can download and install the latest network card drivers and see if that can solve the problem.
Option 2: Follow the link below to fix network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Option 3: Follow the link below to solve Internet connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135
Let me know if it worked.
Hope it will be useful.
Thank you and best regards,
Kadoch - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.
Original title: Windows Store-downloads
Try the troubleshooting steps below after completing the methods provided by Vinodh.V
Method 1: Make sure that the Date and the time is accurate
Open quick run (Windows key + R)
Type timedate.cpl , and then click OK
Click the Internet time tabClick change settings
Click update now , and then click OK once the time is Sync
Method 2: The problem may be caused by the Proxy settings
If you use a Proxy
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Of that type the below command and press enternetsh winhttp import proxy source = ie
If this does not work, you can reset the proxy settings using below command
netsh winhttp reset proxy
3:Fix Windows Update method
Running Windows Update troubleshooting tool can solve some problems.
Open Control Panel
Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view
Select the fixed problems with Windows update.
Select Next and then click Finish when the process is complete
Method 4: Search for the latest Windows updates
Open quick run (Windows key + R)
Type wuapp , and then click OK
Click check updates
Download and install all pending updates.
Restart the computerMethod 4: perform the Scan SFC
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Type in the command, and then press on enterSFC/scannow
Method 5: Upgrade to the Local account and switch it to the Microsoft account
To switch to local accounts
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click on your account
Click Disconnect
Enter the current user password and click Next
Click sign out and finishing
Log on to the user accountTo switch to the Microsoft account
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click to connect to a Microsoft account
Enter the current password
Enter the password of the Microsoft account and click Next
Click switch -
vMotion fails at 9% - Source host cannot connect to the destination host
Hello
I wonder if someone could shine any light on why vmotion fails to occur between an ESXi host who has just been restarted, in order to test HA. I have the following configuration:
3 x ESXi5 DL360 G7s with two 4-way NIC
VSphere Vcenter 5
1 x cluster configured for DRS HA
2 x Procurve 2910 - 24G
The switches are not connected to each other.
Both switches are configured as such:
All ports are not marked. NO PLEASE, no routing
Each host vMotion vSwitch is connected to two switches by 1 x 1 GB nic
I configured a vswitch on each host of vMotion. There are two ports vmkernel with two IPS on the same subnet. There are two vmnic attached to the vSwitch. On each port, a Vmic is configured to be active while the other is unused. I enabled frames on the vSwitch and 2910 switches. A VLAN has been configured on the two predisposees 2910 for vmotion with frames and defined traffic on "no label". I can successfully vmkping all the ip s vmotion on all ESXi hosts. However, when I test HA by stopping an ESXi host, when I restart the ESXi host I am unable to vmotion in that ESXi host. When I test vmkping I find that the host rebooted can only vmkping itself and no other host can vmkping it. Vmotion attempt fails on 9% and errors with the source host cannot connect to the destination host. If I restart the two switches of 2910 I can then perform a vMotion and the vmkping is a success.
Help, please?
Thank you
lansley2000 wrote:
I have since read up on the various load balancing options and find that your method is preferable during the method of "ip hash.
I'll make the change to "port based" and link the two switches
Hello Simon, I think it's a good option to do, since the hash IP load balancing is a bit special and really requires both interfaces to connect to the same physical switch, which must also have a specific configuration. If you like the results after the new changes.
-
Adobe Connection Manager cannot connect to the Adobe servers
Hello
I found many sons of this topic, but not helped me to solve my problem.
I have not used my app in a few months. A few weeks ago, I did it again and still get the message that my subscription cannot be verified because it is unable to connect to the Adobe servers. I started the Application Manager and get the same message there.
I tried everything in this document: http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html all measures are successful and
I tried to connect my laptop directly with the LAN cable to the modem, always without success
I do not use proxies.
I disabled my firewall and Antivirus, spyware, etc. applications, it always says that it cannot connect.
I tried to download the Desktop Application, but also the message that it cannot connect to the servers.
I really don't know what to check out more. I have no problem with secure sites or something else, that I use.
Any suggestions that could be the problem?
Note: it is said to set the clock correctly. What time does yone check against? My Windows is German, he CC is German, I'm in Germany and use the time zone correct. I often use the US formatted numbers and date formats, because I need it Hat way for work. I tried with the settings the Americans and the Germans, well. Makes no difference.
Thank you!
If you are a user and then select the hidden admin, restart and try to update/activate. Click here to find out how toggle hidden admin: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista /
If connected to the corporate network contact your IT Department to see if a Proxy Server or firewall does not block the activation.
Thank you!
Ankit
-
interruption of the connection, cannot connect to the server
I just bought Photoshop Touch for my Tablet Galaxy Note 8. I signed up for Creative Cloud by using an old I connect by an ereader, it still worked, just asked me for my date of birth. I opened creative cloud and as he suggests, dragged an image (jpg) in the screen that appears, and the use of the data went from zero. I then went to the tablet in Creative cloud he has signed with the same login name, then went to settings sync - sync files 'on', only the synchronization with wifi; and he said: "the synchronization process complete", tier 0% complete - which seems to be wrong as it is supposed to be a file there. Then I go to "new" and choose Creative cloud - it works a few boxes around and comes up with "interruption of the connection, cannot connect to the server.
I tried signing off CC on the mac first, stop the application on the Tablet, but it's solid. It goes without saying that the wifi is on and working on the tablet. Can anyone help please.
You have the latest version of PS Touch (1.5) installed? If this isn't the case, please try this version. Thanks, Guido
Maybe you are looking for
-
I have windows 7 on a HP desktop computer.The links are there, the icons simply disappeared.I have a color scheme the module at the top of the page.
-
I can't delete a canceled download...
... (Ironically, it was a new version of firefox) in Firefox v4 Windows XP Professional. I have also already tried safe mode and have administrator privileges, it always says cannot delete because another program is using, even when no programs (incl
-
software Adobe reader 9 works on IE, but it shows only blank pages on Firefox
I have a new hard drive, XP. It has an old Adobe Reader 4 and a newly installed Reader 9. When I tried to look at PDFs on websites, my screen went black, then white ranging from 20 to 30 seconds later. I can read existing pdf both on and off line. I
-
Satellite A - password invalid if I write my password
When I turn my laptop on a blue window appears and tell s write me in password.When I write my password it says in red "Setup warning invalid password". How to solve this problem or what is the password?Please quick help!
-
Where is default windows games?
Since the upgrade from vista to windows 7, I noticed that I have not solitaire, Freecell, hearts, etc. on my PC. Is this normal or am I missing the games. Is there a link I can get to download the default windows games? (Updated and already searched