Cannot connect to the user account

Similar Questions

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• the mouse pointer and cursor of dysfunction, cannot type, cannot connect to my user account?

  OK, I'm not sure how succinctly describe the problem since it is composed of so many things that have actually made my computer useless. I think it's a virus, but my virus scan did not come with something useful, so.

  Last night I watch Youtube videos and edit some pictures when I noticed that I had to type on the touch pad repeatedly until the computer responded. Then it stopped working completely (IE I could still move the mouse pointer, but couldn't click using the touch pad). I switched from windows to look for a solution on the internet, but when I clicked on the address bar of Google Chrome the cursor started ahead of his own, as someone has pressed the space bar - but I was not. This makes type impossible because there were huge gaps between each letter. I turned the computer off and back on (thanks, ICT courses), but the problem has not disappeared - only now, the mouse pointer disappeared sometimes still. It was getting late so I turned it off again and fell asleep.

  This morning as I began it upward there was noises Eman that makes it usually when I plug / unplug power. I tried to type in my password... and couldn't. The capslock wasn't on, I of course did not forget the password from one day to the next, but I kept receiving error messages and could not open a session. Even worse, when I tried to switch to an account that was not protected by Word, he kept jumping to the mine after maybe 3 seconds. I finally managed to click the icon of the second account and logged.

  The touchpad still don't click, when I open Chrome and clicked on the address bar he reacted as I clicked with the button right referring (so I couldn't type) and the mouse pointer always disappears randomly. I did a Norton quick scan and it came with 22 'risks' that he apparently 'fixed', but the problem has not yet disappeared. I would be v. grateful for a quick response, as the laptop is actually not mine, but my father (who keeps valuable most of his photographs on the hard drive).

  EDIT: I opened it in Mode without failure. the touchpad works now, but randomly on the keyboard keys have stopped working. Others come with a random combinations when I press on them, for example. "you" instead of "t", "p"] - when I press on «-» I can't even reinstall the keyboard drivers, because I can't type in my admin password.

  Also I do not know what topic to put this in so if it's wrong, please let me know!

  Hello

  1. What is the number of brand and model of the laptop?

  2. you have made no changes to the computer before the broadcast took place?

  Follow the steps mentioned below:

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 3:

  Step 1:

  Check the keyboard works well with the on-screen keyboard.

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  You can also check if the problem is keyboard or does not connect the external keyboard.

  Step 2:

  Update driver mouse

  a.Click Start.
   
  b control panel.
  menu a.Utilisez of the sons of the menu drop down next to the opinion of: in the upper right, select large icons.
  b.Click mouse.
  c the Hardware tab, click the properties button.
  d.Click on driver tab, click on set to update driver.
  

  Hope the above information is helpful.

• cannot connect to my user account

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot connect to the user profile

  When I try to log on to my account on the computer at home, it doesn't let me, saying that "the service user profile Service does not log. User profile cannot be loaded. "I had problems loging a few weeks that I connect and keep getting on a temporary profile, but this has happened in the last two days. All other profiles work on the computer without any problem.
  Any help will be greatly appreciated

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L750D - cannot connect using the administrator account

  Hello

  I have a Toshiba Satellite L750D-14R and it I cannot access to my administrator account, I had not changed my password or anything either, and, the night before, I had been on that fine and the next day he said my username or password was incorrect.

  I tried to put my password in full about 30 times and he wouldn't so I had to use the account invited to try and find a solution, whenever I connect I try to put my password and it still says the same thing.

  Can someone help me please?

  Someone at - it other access to your laptop? I mean the password cannot be changed without reason.

  Maybe a stupid question now but have you created the recovery disc? Problem is that without this password, you will not be able to install the OS by using recovery image saved on the HARD disk and in the worst case, you must reinstall OS by using the recovery disk.

• MacBook Pro cannot connect - bug disabled user account

  When connecting my user account is disabled.

  Went for lunch is returned and locked onto the screen saver.

  I can't find the account on the command line (cmd S) and I ran fsck to control the player.

  You ask for the password after sleep checked safe? You have active FileVault? If you restart will it then allow you to connect? If this is not the case, try safe mode. Replace with the SHIFT key down. You could then go to System Preferences and disable the sleep mode connection.

• SBS 2008 cannot connect with the admin account

  Hello

  I have intalled SBS 2008 on my server. Yesterday he installed updates, now I can't connect using my administrator account (it says wrong user name and password). The only way I could log in with my credentials is hollow in Safe Mode.
  The server is used as a controller of domain, MS Exchange and the file and printer sharing. None of these processes work properly. I can access the drives mapped to the user's computer and Office does not connect to Microsoft Exchange.
  I appreciate any help you can give. Thank you.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• Cannot connect to the three accounts welcome screen, an admin

  I have just reintstalled Windows Vista on both hard drives from my computer of Pavilion a1600n. I added two user accounts for my wife and my children, in addition to the administrator account for each instance of windows for a total of three user accounts. I tried to connect to Windows, but can't click on any office on the Welcome screen. It is a problem on both hard drives. Any suggestions?

  Thank you. It turns out that the problem was the mouse and keyboard needed new batteries. My wife is resolved!

• Impossible to install W8.1, impossible to install the KB2862973 update with error code 80073712, cannot connect to the microsoft account

  I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update.  Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired.  Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now.  If this problem persists, look for 'referee' on the start screen. "I also performed this task without success.  Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712.  I looked for solutions to this problem, and those who have tried unsuccessfully.  I really need someone to tell me how to fix all these issues, because I believe they should be linked.  It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!

  Thank you

  Shane

  Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.

  I suggest you to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821

  Keep us informed.

• Cannot connect to the administrator account

  So I have 2 accounts on this laptop, one is mine, we are invited. Both are Standard accounts and it's me to update some programs and browsers limit. I tried to make my administrator account, but whenever I chose to change the button to record it's not stopping me from changing.

  There is an account of homegroupuser on the control panel and it seems that it is the true administrator account, but it does not appear on the logon screen. How to connect on this homegroupuser account and change my personal account for the administrator.

  So I have 2 accounts on this laptop, one is mine, we are invited.

  -> Things to high risk. Your account is the one and only the admin account. What will you do if something is wrong with it? You'll be in diabolical trouble!

  Both are Standard accounts

  -> No, yours is an administrator account. It indicates the Top - see below. You try to promote at the admin level when it is alread at this level. What you need to do is rather to create, test and document a spare emergency admin account.

  

• Cannot connect to the user other than SYS 11g

  Hello
  
  I am expereincing a strange problem.
  
  I can not connect to Database 11g except for sys and system. Other users that I can not connect to Database 11g.
  What could be the problem?
  
  I'm running on Windows XP
  
  Version of database
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  PL/SQL release 11.1.0.6.0 - Production
  CORE 11.1.0.6.0 Production
  AMT for 32-bit Windows: Version 11.1.0.6.0 - Production
  NLSRTL Version 11.1.0.6.0 - Production

  user400 wrote:
  I have re-solved by running the following sqlplus
  change dev user identified by test123

  Previously, I've changed the password using Toad.

  Then maybe your version of Toad does not support the 11g, and change the user through this tool uses all uppercase in user/password.

  According to your terms of use, maybe you give free alternatives [Oracle SQL Developer | http://www.oracle.com/technology/products/database/sql_developer/index.html] a try.

• Jabber user cannot connect using the AD account

  Hello

  I have a question about jabber/movi registering on local control of the VCS. They can't log in using their Jabber account on the control of VCS that have been configured on TMSPE. The connection error message is ' user/password incorrect or field name '...

  Jabber users who were configured manually on the TMS can sign in successfully.

  Connection between TMS and AD is ok and import AD users successfully.

  What should be the correct configuration on the authentication policy control VCS?

  > Sub-area by default?

  > Deafault area?

  > The traversal area?

  I also need to plug the VCS control on the announcement?

  Thank you

  Acevirgil

  "Verify the identification information" on the three - and Yes, the VCS - C needs to be added to our era.

  /Jens

  Please note the answers and score the questions "Answered" as appropriate.

• Cannot connect to the user's profile, can't remember the password

  I bought my HP Pavilion laptop of series g, almost 2 years ago. It worked perfectly until 2 days ago. When I woke up yesterday and went to the opening of session of Windows 7, I get the following message "the service user profile the logon failures. User profile cannot be loaded. »

  What should I do?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K