Cannot connect to the user other than SYS 11g

Similar Questions

• Cannot connect to the user profile

  When I try to log on to my account on the computer at home, it doesn't let me, saying that "the service user profile Service does not log. User profile cannot be loaded. "I had problems loging a few weeks that I connect and keep getting on a temporary profile, but this has happened in the last two days. All other profiles work on the computer without any problem.
  Any help will be greatly appreciated

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect to the user account

  Hello

  I have a Mac Mini end of 2012 running OXS El Capitan, while downloading the movies I did spill over from my hard drive, while this isn't a problem in itself when I restarted I am able to connect to my user accounts.

  Specifically what I see, this is the option normal user with the available accounts login screen - I select a configured account (I have 2 of them) enter the word of past (rightly), then instead enter the account, I get the login screen again.

  Strangely enough, when I select the guest account, I can get in.

  Any ideas how do past this and on the accounts?

  I tried to reset the NVRAM that allowed me to access disks and do first aid, it has not shown any questions or help, unfortunately.

  I have access to the Mac using a Windows PC, which allowed me to make space on the hard disk drive by removing some of the movies.

  Thank you very much

  Keith M

  Try to start in safe mode and then open a session and try to delete files to free up disk space.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Cannot connect to the user's profile, can't remember the password

  I bought my HP Pavilion laptop of series g, almost 2 years ago. It worked perfectly until 2 days ago. When I woke up yesterday and went to the opening of session of Windows 7, I get the following message "the service user profile the logon failures. User profile cannot be loaded. »

  What should I do?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• "Windows cannot connect to the service user profile service.

  SOMETIMES, when I log onto an account says "unable to connect to the user profile service service."  When I log into an administrator account, it displays a black screen and an error that says that my office has been denied access.  It began quite recently after I transferred all my gear in a new case.  I don't know if this has something to do with it.  I spent hours researching this and I can't find a way to solve the problem.  Help, please!

  Hello

  Since you don't have any attempt to Restore Points tapping F8 you can start and select last known good configuration
  Configuration.

  -----------------------------------------------------------------------------------------------------------------------

  If that doesn't work try these - such as using Safe Mode ADMIN and/or the hidden ADMIN account.

  Even if these aren't exactly the same methods please check solutions.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  =================

  If necessary:

  Make sure that all Windows Services are set to default values.

  Start - type in the search box-> find Services at top - double click.

  BlackViper - Services (value all default values)
  http://www.blackviper.com/WinVista/servicecfg.htm

  =================

  You might what to do that - an InPlace upgrade/repair facility that helps keep the
  programs and data backups redundant but are always a good idea.

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Script to email if users ' other than ' connection

  Hey people,

  I'm looking for a script "alarm" which will send if users other than those in a file 'authorised_users.txt' of the newspaper on the VC 3 and/or the esx host 3. Authorized users can be created via VC permissions, but would advise us if role similar, although not authorized connection attempt.

  Any thoughts?

  Thanks in advance,

  Shane.

  Easy peasy

  Remove the domain from the local administrator of the VC server admins. Don't forget to add the VC admins for the grp of the local administrator.

  Then you know that they are not there. no = no need to worry.

  / Allan

  http://doitsmarter.blogspot.com/

• 2 of the 3 users cannot connect to the net

  Problem suddenly "(il y a 3 jours), 2 users on this computer cannot connect to the internet." I am registered as an administrator and I am very well but 2 members of my family are unable to connect with their names.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot connect my midnight user

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  This is the error message when you tried to open a session?
  The user profile Service has not logon. Use the profile cannot be started.

  If this is the case, please use the following tutorial. It has a "Fix it for me" application as an instructions "Let me fix it myself":

  http://support.Microsoft.com/kb/947215

  If you have a different error message, then please report it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Unable to connect to ZAKCAPRIUS. Failed to connect to the user "zakcaprius\Zaki". (Microsoft SQL Server, error: 18456)

  Cannot connect to the sql server database engine 2008 developer edition. However can connect to analysis, reporting services. Kind regards. ~ ~ SiFaR ~ ~

  Please repost your question in the Discussion SQL Server group to: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sqlserver.server&cat=en_US_671e06d0-f20d-4bb3-9c6a-42c825ddb1dc&lang=en&cr=US where questions of SQL Server specialists will be more than happy to help you with your problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• cannot connect to the database

  Hello

  on 10.2.0.3

  In my listener.ora, I gave port 1521.

  In tnsnames.ora also 1521.

  When I try to connect to my db I get:

  sqlplus system@MYDB

  ORA-12514: TNS:listener is not currently of service requested.

  in listener.log I

  07 NOV. -2013 09:04:54 * (CONNECT_DATA = (SERVICE_NAME = MYDB) (CID = (PROGRAM = D:\oracle\bin\sqlplus.exe)(HOST=SERVER)(USER=user))) * (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 4358))))

  or

  (ADDRESS = (PROTOCOL = tcp (PORT = 1858))(HOST=127.0.0.1))

  or

  (ADDRESS = (PROTOCOL = tcp (PORT = 1869))(HOST=127.0.0.1))

  In sqlnet.log I

  AMT-12564: TNS: denied connetion

  My question is why in listener.log I have different port numbers instead of 1521?

  Thank you.

  user10274093 wrote:

  Thanks Hoek.

  I cannot connect to the database on the server hosting then no use of the customer.

  I don't see in these links, something on the port number change in listener.log.

  Kind regards.

  Port 1521 is used to communicate with the listener.  If the listener is able to actually process the request (your error indicates it is NOT able to process the request), while it generates a server process that communicates with the client on a different port.  At this point, the listener is out of the picture until the connection goes.

  Read the links once again, especially the other, which directly addresses your specific error message.

  And know that the requests to the IP 127.0.0.1 (or its alias 'localhost') never to leave the machine for which the request was made... your log listener seems to indicate that is used, but if that were the case, you would have got a different error.  If you read the links provided, you will see that the first centerpiece of the ora-12514-related news is the release of "lsnrctl status".

• Cannot connect to the XMLDB via http, ftp, webdav

  I can connect to XDB through a DEV instance on the same server, but cannot connect to the instance SCIDEV. The differences are THAT DEV is nls_characterset WE8MSWIN1252. SCIDEV is AL32UTF8. DEV has ports 8080 and 2100. SCIDEV has ports 8089 and 2102. HTTP request continuously a user / password without error. Watch FTP authentication failed. WebDAV continually requires a user name and password. I've tried a few things with no luck yet. What should I do to be able to connect? It is also published in Oracle support as SR 3-3043961271 technique. Please do not share the files downloaded in this forum SR.
  
  Follow the different SQL commands. Running Windows2003 Server and Windows XP SP2 client.

  SYSTEM@scidev> select * from v$version;
  Oracle Database 11g Release 11.2.0.2.0 - Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE    11.2.0.2.0      Production
  TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  5 rows selected.
  
  SYSTEM@scidev> select * from nls_session_parameters;
  
  PARAMETER                                VALUE
  ---------------------------------------- ---------------------------------------
  NLS_LANGUAGE                             AMERICAN
  NLS_TERRITORY                            AMERICA
  NLS_CURRENCY                             $
  NLS_ISO_CURRENCY                         AMERICA
  NLS_NUMERIC_CHARACTERS                   .,
  NLS_CALENDAR                             GREGORIAN
  NLS_DATE_FORMAT                          DD-MON-RR
  NLS_DATE_LANGUAGE                        AMERICAN
  NLS_SORT                                 BINARY
  NLS_TIME_FORMAT                          HH.MI.SSXFF AM
  NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
  NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
  NLS_DUAL_CURRENCY                        $
  NLS_COMP                                 BINARY
  NLS_LENGTH_SEMANTICS                     BYTE
  NLS_NCHAR_CONV_EXCP                      FALSE
  
  17 rows selected.
  
  SYSTEM@scidev> select * from nls_database_parameters;
  
  PARAMETER                                VALUE
  ---------------------------------------- ---------------------------------------
  NLS_NCHAR_CHARACTERSET                   AL16UTF16
  NLS_LANGUAGE                             AMERICAN
  NLS_TERRITORY                            AMERICA
  NLS_CURRENCY                             $
  NLS_ISO_CURRENCY                         AMERICA
  NLS_NUMERIC_CHARACTERS                   .,
  NLS_CHARACTERSET                         AL32UTF8
  NLS_CALENDAR                             GREGORIAN
  NLS_DATE_FORMAT                          DD-MON-RR
  NLS_DATE_LANGUAGE                        AMERICAN
  NLS_SORT                                 BINARY
  NLS_TIME_FORMAT                          HH.MI.SSXFF AM
  NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
  NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
  NLS_DUAL_CURRENCY                        $
  NLS_COMP                                 BINARY
  NLS_LENGTH_SEMANTICS                     BYTE
  NLS_NCHAR_CONV_EXCP                      FALSE
  NLS_RDBMS_VERSION                        11.2.0.2.0
  
  20 rows selected.
  
  SYSTEM@scidev> select * from dba_errors;
  
  no rows selected
  
  SYSTEM@scidev> select count(*) from dba_objects
    2  where owner='XDB' and status='INVALID';
  
         COUNT(*)
  ---------------
                0
  
  1 row selected.
  
  SYSTEM@scidev> select comp_name, status, version from dba_registry
    2  where comp_name='Oracle XML Database';
  
  COMP_NAME
  ---------------------------------------------------------------------------------
  STATUS                                       VERSION
  -------------------------------------------- ------------------------------
  Oracle XML Database
  VALID                                        11.2.0.2.0
  
  
  1 row selected.
  
  SYSTEM@scidev> show parameter dispatchers
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  dispatchers                          string      (PROTOCOL=TCP) (SERVICE=scidev
                                                   XDB)
  max_dispatchers                      integer     NULL
  SYSTEM@scidev>
  
  SYSTEM@scidev> select dbms_xdb.gethttpport from dual;
  
      GETHTTPPORT
  ---------------
             8089
  
  1 row selected.
  
    1* SELECT DBMS_XDB.getaclDocument('/home/').getClobVal() FROM DUAL
  SYSTEM@scidev> /
  <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl
  .xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
    <ace>
      <grant>true</grant>
      <principal>PUBLIC</principal>
      <privilege>
        <all/>
      </privilege>
    </ace>
  </acl>
  
  
  1 row selected.
  
  SYSTEM@scidev> 
    1* SELECT DBMS_XDB.getaclDocument('/home/pharma').getClobVal() FROM DUAL
  SYSTEM@scidev> /
  <acl description="Private:All privileges to OWNER only and not accessible to others" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:dav="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
    <ace>
      <grant>true</grant>
      <principal>dav:owner</principal>
      <privilege>
        <all/>
      </privilege>
    </ace>
  </acl>
  
  
  1 row selected.

  Status of the listener follows

  D:\oracle>lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 02-MAR-2011 12:40:57
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
  Start Date                21-FEB-2011 22:58:56
  Uptime                    8 days 13 hr. 42 min. 2 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   D:\oracle\path\network\admin\listener.ora
  Listener Log File         D:\oracle\path\listener\alert\log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8089))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2102))(Presentation=FTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2100))(Presentation=FTP)(Session=RAW))
  Services Summary...
  Service "DEVXDB.aa.ad.epa.gov" has 1 instance(s).
    Instance "dev", status READY, has 1 handler(s) for this service...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "dev" has 1 instance(s).
    Instance "dev", status UNKNOWN, has 1 handler(s) for this service...
  Service "dev.aa.ad.epa.gov" has 1 instance(s).
    Instance "dev", status READY, has 1 handler(s) for this service...
  Service "scidev.aa.ad.epa.gov" has 1 instance(s).
    Instance "scidev", status READY, has 1 handler(s) for this service...
  Service "scidevXDB.aa.ad.epa.gov" has 1 instance(s).
    Instance "scidev", status READY, has 1 handler(s) for this service...
  The command completed successfully
  
  D:\oracle>

  Http and ftp to SCIDEV ports are resolved in Enterprise Manager at 8089 and 2102.
  
  FTP log follows. First connect you to DEV successfully. Then connect you to SCIDEV fails.

  WINSOCK.DLL: WinSock 2.0
  WS_FTP95 LE 4.60 98.03.17, Copyright © 1992-1998 Ipswitch, Inc.
  local chdir to c:
  - -
  connecting to localhost:2100
  Connected to localhost port 2100
  220- servername
  Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
  USER xdb
  331 pass required for XDB
  PASS (hidden)
  230 XDB logged in
  PWD
  257 "/" is current directory.
  Host type (I): UNIX (standard)
  PORT theIPaddress,15,15
  200 PORT Command successful
  LIST 
  150 ASCII Data Connection
  Received 250 bytes in 0.1 secs, (20.00 Kbps), transfer succeeded
  226 ASCII Transfer Complete
  QUIT
  221 QUIT Goodbye.
  local chdir to c:
  - -
  connecting to localhost:2102
  Connected to localhost port 2102
  220- servername
  Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
  USER xdb
  331 pass required for XDB
  PASS (hidden)
  530 login error
  ! Logon failure, so quitting

  But I can log in with the same user in sql plus

  SYSTEM@scidev> connect xdb@scidev
  Enter password: ***********************
  Connected.
  XDB@scidev> select user, sysdate from dual;
  
  USER                           SYSDATE
  ------------------------------ ---------
  XDB                            02-MAR-11
  
  1 row selected.
  
  XDB@scidev> 

  This is starting to look like bug 6049194. Please open an S/R with Support of Oracle