Cannot control the Websphere application

Similar Questions

• Signed .bar - cannot find the default application

  Hello

  a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

  I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

  "Cannot find the default application"

  
  I've already put my developer intro PlayBook (OS 2.1) mode.

  How to install the .bar file?

  Thank you.

  Vibes

  You need to side load the folder bar. A lot of discussion on that.

• Cannot control the use of database storage

  Hello

  I've just updated the vCenter Server from 5.5U1 to 5.5U2b. In 'Health Service', there are new warning message:

  "Cannot control the use of database storage. See VMware KB 2078305 for more details".

  I use MS SQL 2008 R2 SP1 Express, which is supported by this version of vCenter. There are also a lot of free space on the disk of the server (63 GB free). Ko 2078305 does not explain this particular warning message and the data of events for task and retention policy are also defined.

  So, what should be the problem? What are the conditions to trigger this alert?

  Thank you

  David

  Thank you so much Jogits you are right, I used google and find the solution on the blog below

  I put in sql db permission:

  use master

  go

  grant VIEW SERVER STATE to [vpxuser]

  go

  GRANT VIEW ANY DEFINITION to [vpxuser]

  go

  and after

  Restart the Vcenter, and is now GREEN

  Setting the server vCenter 5.5 & #8217; database question s followed by its use in the health service. Salt * wet * bytes

• I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  Hi Julie,.

  Please see the below help document to uninstall the application:

  Using creative cloud | Download, install, update or uninstall applications

  Otherwise, you can use the CC cleaning tool as well.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• Satellite L355-S7817 - cannot control the default voice of Narrator

  I don't seem to be able to control the default voice on my L355-S7817 with Vista home OS.
  I changed Mrs Anna parameters but Toshiba male voice starts each time I use a program that uses the voice of the Narrator.

  I even uninstalled the engine from Toshiba, SR and the application without result!
  The male voice of toshiba is still present...

  Is there some sort of setting somewhere that I can use to overcome this control over speech applications by Toshiba?

  Thanks in advance.

  Hello

  To be honest, I've never used this feature, but I found a few useful details provided by Microsoft:

  Check this box:

  * Hear text read aloud with Narrator *.
  http://www.Microsoft.com/enable/training/windowsvista/Narrator.aspx

  * Change the Narrator voice settings *.
  http://www.Microsoft.com/enable/training/windowsvista/narvoice.aspx

  Maybe it could be useful

  Welcome them

• Cannot control the color sensor in LabView for Mindstorms

  Hello!  New here.

  I'm currently boning on LabView via 'LabView for Lego Mindstorms' for a possible job in the near future, and I encountered a problem from the beginning.

  I am programming my brick Lego of LabView to simply activate the color sensor which is quite easy: I'm building a while loop and inside I have a block of color sensor attached to a block of text that displays the light intensity of the probe in the text on the brick.  I compile and run the detector turns on and I can read the intensity constantly updated on the brick.  This part works fine.  I would now like to control the light sensor (that doubles as a light source with color LEDs) on the front of the LV Panel.  The book I'm using (LabView for Lego Minstorms) says I should block sensor on the entry "generate light' do right click and choose"Create--> Control"in the menu that appears.  A Boolean command button should appear connected to the sensor block in the block Panel and a push button should appear in the front panel.  This is not what is happening.  Here, the two things are different.

  (1) I have no port "generate light" click on right-click.  This is probably using a version more day of Mindstorms that uses of the book.  It's a matter of book/Mindstorms, which probably cannot be resolved here but I hope that the next issue of problems will make it irrelevant.

  (2) I right click and create the control, but rather than create a Boolean command button as the book predicts, it creates an icon "BrickReference.lvclass".  He connects very well with the light sensor and a corresponding block is created in the front panel, but it is a paper weight that I can tell.  I can't do anything with it.  There are no buttons to push, no slider, button, button radio etc and I can't seem to change into something that somehow work.  I have delete and don't create a no kidding Boolean button from the library, but it does not connect to the photoelectric cell and so I can not compile.  So now, I'm a little stuck.

  I searched "Reference of the brick" online in the context of LabView class and have found little or nothing that talks about its definition or how I can use it to control the light via the front panel sensor.  Help with the software section is not much help, and yet I'm sure there must be a way to control a simple Lego light sensor of the façade for debugging purposes and others.

  If you know what I'm doing wrong or if you know a finish around this issue that will allow me to control a Mindstorms brick from the front in this way, please let me know.

  Thank you!

  Try to post in the forum of Lego.

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460

• Cannot install the sample applications manually

  Hello

  I'm having a time difficult installation SDK push sample applications on a remote computer. I try a manual install of Tomcat. The machine runs on Linux Red Hat.

  The error I get is:

  [org.springframework.web.context.ContextLoader.initWebApplicationContext()] - Context initialization failed
  org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registerListeners' defined in class path resource [sample-push-initiator-context.xml]: Invocation of init method failed; nested exception is org.springframework.transaction.CannotCreateTransactionException: Could not open JDBC Connection for transaction; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure
  
  The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)
  

  It looks like a problem with the JDBC connector, but I do not know how to solve. Among the things that I've done are:

  • Generate the database manually.
  • Fill the PushSDK.properties with the database and JDBC information. Copy this file in each directory WEB-INF/classes of applications examples of
  • Copy the mysql connector jar file in the directory WEB-INF/lib of each application
  • Edit the file app.properties with the information from my BB (app id, base url PGG etc.). Copied in the directory WEB-INF/classes of applications. I did the same thing with suspension - context.xml and app - context.xml
  • Edit conf/server.xml of Tomcat to set the http and https ports and the UTF-8 encoding for the request URL query component. In fact, I have only port 8080 available in the machine and I have configured HTTPS to work.
  • A self-signed certificate and shows its location in the conf/server.xml file. Indicates its location in conf/server.xml
  • Edit bin/catalina.sh to set the JAVA_OPTS UTF-8 encoding

  The initial Tomcat page seem to be working in https://machine_ip:8080.

  But there are errors with the BB apps:

  • https://machine_ip:8080 / sample-push-initiator returns 404
  • https://machine_ip:8080 / pushsdk returns 404
  • https://machine_ip:8080 / debug-Portal opens the Debug Portal, but displays the following message:

  Internal Server Error: 
  
  Sorry, we are unable to properly process your request at this time. Please contact a system administrator to investigate the problem by examining the logs.
  

  Does anyone have an idea of what's going on? I would be very help appretiate

  Best regards

  Maria

  Hi all!

  Finally, I could solve this problem. MySQL was not allowing the JDBC connection. I have

  delete the line:

  skip-networking
  

  in MySQL configuration file (/ etc/my.cnf) and now the sample applications seem to work ok.

  I still cannot subscribe to the good customer, but that's another story...

  Kind regards

  Maria

• Cannot connect the WebLogic application server

  I am trying to install the WebLogic application between jDeveloper (11.1.1.4) server. When I created a new connection, I get under result.
  
  JSR-160 LENGTH tests... failed.
  Cannot establish the connection.
  JSR-160 DomainRuntime... skipped tests.
  JSR - 88... skipped tests.
  JSR-88-LOCAL... skipped tests.
  JNDI... skipped tests.
  JSR-160 tests edit... skipped.
  Tests of HTTP... success.
  Test server MBeans model... skipped.
  Test HTTP authentication... success.
  
  2 of the 9 successful tests.
  
  
  I'm going through "Build your first process with Oracle BPM 11g" and I'm at the end of the stage, deployment. However due to the connection problem, Kingdom LOV has nothing in the search for identification Remote_WLServer. Users of demonstration have been deployed and created. All servers are running. No idea what could be wrong?

  Check this post for more information - http://fusionstack.blogspot.com/2010/04/ofm-in-cluster-with-http-server.html

• Finder cannot find the necessary application to open a file.

  Finder becomes more stupid (is that a Word?)! For example, I double click on a Word file with the extension .docx and it opens in preview! Or I right click on a file and the appropriate application is not yet listed! This problem appeared only in the last few weeks; important changes will only have been the OS and Apple updated applications recommended.

  Right click on the file for information. Select what app should open the file, and then select the check box to apply this selection to all files of this type.

• Cannot control the volume

  I have an Apple TV 4 (tvOS 9.2.1) with a Philips BDM4065UC 40 '' monitor (not TV) connected via HDMI. Everything works OK, except that I can't control the volume with the Apple Remote.

  In the volume control settings, I can choose between 'Auto', 'TV via IR' and 'Off '. Obviously 'Off' does not work. But not more than the other two.

  I asked Philips support if the BDM4065UC supports the HDMI-CEC, that I understand to be a sine qua non for Apple TV, and I'll make their response when I get it. However, I understand that the options 'Auto' and 'TV via IR' would not be displayed if HDMI-CEC was not taken in charge for the monitor.

  I can't form a new setting because the BDM4065UC is not a remote control to train with.

  I tried to use Apple's HDMI cable and the HDMI supplied with the BDM4065UC.

  Any thoughts?

  Steve

  I'm waiting for the volume of a computer screen (if it has speakers) to be flown by the device to which it is connected. The monitor is equipped with a remote control, otherwise I think he won't have the receivers to receive a signal from one.

• Cannot download the PowerPoint application

  HI people of iOS

  For some reason, I have reset my iPhone 5s and reinstalled all essential, including Microsoft Office applications.  All are good except the PowerPoint application.

  As shown below, whenever the download progress goes up to 2/3, the following error appears and the download is complete.

  

  I tried more than 20 times to re-download on WI - Fi and everything has failed. I also tried to download more 4G, but the App Store download only the size is greater than 100 MB.

  What is the problem with the PowerPoint application? Any solution let me download?

  Cordially and

  Try to download via iTunes on a computer.

• HP Pavilion 15 laptop: Cannot control the brightness of the screen

  Hello!

  I can't control the brightness of the screen of my laptop. The problem started about 2-3 days ago.

  I'm trying to fit it through the keyboard, and also through the power Panel, but it is still on the minimum brightness...

  I also noticed that the brightness of the keyboard keys are not functionnig well: when I click on one of them (more or less brightness brightness), it shows me the brightness slider, but he won't go up or down by pressure of the keys... only if I drag with the mouse. And yet, no adjustment of the brightness.

  Could you please help me?

  Thank you!

  Hello
  
  Install the graphics driver to leave either the Recovery Manager or your HP support page and restart the system after completing the installation.
  
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03430118
  
  What is the exact model you are having?
  http://support.HP.com/us-en/document/c00033108
  
  Concerning
  
  Visruth

• Volume adjusts at random. Cannot control the volume with other software, ie iTunes.

  I have a HP Pavilion dv7-7000 Quad. The music playback volume goes up and down. Also, I can't control the volume in itunes or winamp. If I turn the volume in itunes there for a while, but back down. When I turn the volume to 1% in itunes, it says there for a few seconds and it slowly rises to the top.

  I tried a lot of things trying to get this problem resolved and spent over 2 hours with HP tech rep:

  1 uninstall the audio driver, restart, install the driver.

  2 bios flash

  3 reinstall the sound driver using HP Recovery Manager

  4 Windows repair.

  5 Chkdsk

  The only thing that worked was

  Uninstalled the audio driver in Device Manager and is looking for new devices and installed windows automaticlly refreshment and it fixed the issue... * beep *? I had my helmet in the decision-making when the driver installed.

  I'm afraid to turn my computer off now.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator