Cannot copy #BSSC: cannot find specified / file path.

Similar Questions

• "The system cannot find specified file", or "refers to a location that is not available" in my folder music Public

  I have a problem with several files that I can't remove. I bought a new laptop Windows 7 a few months ago, and my music library is located in an old Mac I installed iTunes and copied everywhere, but for some reason, a couple of directories has become corrupted in the process. I was able to move a couple of them from 'C:\Users\Public\Music' to 'C:\Corrupted records' so I don't have to look at, but one of them is

  refusing to move. If I try to open it, I get the message "C:\Users\Public\Music\P.O.D. refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the informaqtion could have been moved to another location. »

  If I try to get the properties, the type of file is a folder (.) that opens with Windows Shell common. Reading alone and Invisible are unchecked. It is not shared. The requested security information are either unavailable or cannot be displayed. There are no previous Versions. I tried optimizing for music and General items.

  I tried to remove it from a command line, and although he can be seen in the directory, I get an error if I try to delete or move it. I tried to delete it in Mode without failure. I tried to create another folder with the same name, and it creates a folder without end '. ", I'm able to remove, but the original is still there. I have tried uninstalling iTunes and iTunesHelper.exe cessation force.   I ran a chkdsk.  I looked in the registry. I tried to reboot in safe mode and try it. I tried to create a new account and delete from there. I tried to reset the permissions. I even deleted my entire library of music. If I try to change properties it tells me that the "system cannot find specified file."

  This issue is driving me crazy... I should be able to just go and start over, but I won't be able to copy this particular music folder. I could live without it, I suppose, but I wouldn't not to-I fear that this will happen in folders more if I can't find a solution. I could ignore it, but I am too a retention... I installed servers in a previous life, and when such things happen that we do something more deep is what concerns me in particular.

  Any suggestions? Please?

  Hi Zarebeth. I have the answer to your problem. The problem you are having is the same problem I had, it's a file name that ends with a '. '. (one point). That's THE problem, which has also caused all of your previous attempts remove this folder to fail. Windows does not allow you to create such a file, but Mac FACT (you mentioned that your music library lay on an old Mac)! Try for yourself, create a folder in Windows called "P.O.D." and Windows automatically re-writing this folder as "Painter" (note the last missing point). MAC doesn't have a problem with that, you can call your folder "P.O.D." witout any problem (but also allows you to call this 'Painter' folder (note the last missing point)). The only problem is when a folder created on a Mac device ends on a computer Windows, that happened when you copied the musicfolder of your Mac on your Windows 7 laptop. For example, I had the problem with music "C:\Users\Public\Music\M.I.A" and "C:\Users\Public\Music\T.I." after that I copied the files from my Ipod Touch (also a feature of Mac of course) for my new Windows 7 laptop to function.

  Now, I can only tell you how to remove this folder, I don't know how to recover all the data that have remained in this "indelible" folder (if any). What you can do of course, is to return to your old Mac, rewrite the "P.O.D." folder as "Painter" (note the last missing point) which will BE recognized by your computer laptop Windows 7.

  It's very simple, and you'll wonder how the sollution might actually be this simple :))

  GO to "command prompt" (start > all programs > Accessories > prompt) then in the command prompt (the small black screen with white letters), you type (in your case):

  RD/s '\\?\C:\Users\Public\Music\P.O.D.

  RD is as a function of deleting files (not for the files).

  You will then be asked if you are sure "(Y/N)" and then of course, you type 'Y' and press enter! " And like that... begone is the folder which you so frustrated! Happy days are back! : )

• System cannot find specified file hpzmsi01.exe

  Hi all

  My first post.

  I try to install the software from AIO_CDB_Net_Full_Win_WW_130_141 for my HP Office Jet 7310 all-in-one printer.  Model #SDGOB - 0305 - 02.

  I'm running Windows 7 Ultimate.

  The installation runs until I get the message "the system cannot find the file specified."  At the dialog box title "C:\User\Bob'sH... hpzmsi01.e...» "I click 'OK' and I get 'Solution for the Installation of HP Windows 7" error.  The error message is still on the screen.  If I click OK the installation will now recover and restart.

  This isn't the first time I installed my printer, but the first time for this error.  I'll have to let all over again and sign in again on this forum.

  Thanks in advance.

  Respectfully,.

  Hi Shane R.,.

  I'm sorry, but I don't have the chance to try the solution of yoiur.  Well, I'm tired of playing games.  So I made a new clean install.  I allowed the pc find the default «HP Officejet 7310 all-in-One Printer»  After checking that he was printing and scanning, etc, I downloaded the software and it now works fine.

  So is the new pc configuration.

  Thanks in advance.

  Respectfully,.

  Bob

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hello

  My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

  Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

  So what problem here? and whats solution for that?

  
  

  

  has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

  http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

  C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
  C:\apps\sampleapp.zip o C:\apps\Output2
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compilation of application BlackBerry WebWorks
  IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
  . tmp\sampleapp (the system cannot find the file specified)
  [ERROR] CAP exception has occurred

   

   

   

  How do I solve this problem

  The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

  If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

  C:\Program Files (x86)\Java\jdk1.6.0_31

   

  
  You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

  In short, he must be JDK6 and it must be 32-bit.

• I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Why is the error, how to fix?

  File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin

• Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

  Original title: Backup failed, error code but no NVIDIA chipset

  Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

  Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  ====================================================================

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Note: trial does not create a Bootable restore CD you will need to restore the image)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  Ghost 15 product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2012 product review:
  http://www.whatsabyte.com/P1/ATI_2012_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

  Also copy disc to disc with Norton Ghost
  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/products/home/free-backup-software.htm

  Untested alternatives
  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  J W Stuart: http://www.pagestart.com

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

  Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

  Hello rarif, welcome.

  I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

  1. go in:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  2. download the utility and install it
  3 run the utility from START > all programs > Windows Installer Cleanup...

  4. find the program you want to uninstall, then remove the
  5. next, restart your computer

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.