Similar Questions

• Connect with vCenter Orchestrator 7

  Can not find, where I can connect the camera orchestrator 7.0 can connect to the Server vcenter. There is no documentation available for this version

  can anyone help? Thank you very much

  Connect vRO 7 to vCenter, you can use a workflow now, check under \Library\vCenter\Configuration

  - Add an instance of vCenter Server <--> this workflow implements vRO to allow vRO to things with vCenter.

  - Registry vCenter Orchestrator as a vCenter Server extension <-> this workflow shows vCenter Orchestrator is available to run workflows. It is important for vSphere integration Web Client for Orchestrator. Note: vRO and vCenter MUST use the same source SSO and the user logged on to the Web Client vSphere must be a member of the Administrators group of the vRO you specified for Orchestrator.

• How to create Self Service Portal in Vcenter Orchestrator? times

  Dear team,

  I want to create the Self Service Portal to reset user password in Active Directory in Vcenter Orchestartor. Could someone guide me for this

  Note: I installed Vmware Vcenter Orchestrator 5.5.

  
  

  Kind regards

  Odile M

  TechM

  I hope it would be only certain types of admins/helpdesk do PW reset because you must connect to the WebView in order to run the workflow... in any case, you can follow this tutorial for a Webview based in vCO:

  http://www.vcoteam.info/articles/learn-VCO/107-create-a-simple-VCO-self-service-VM-provisioning-Portal-part-3.html

  Regarding the other prerequisites:

  vCO must have the ad plugin installed and configured to use SSL when communicating your AD environment. It is a requirement for users created with passwords and resetting passwords.

  When you get to the step of the tutorial for mapping a workflow, you'll want to use the workflow to "Change password". This is a workflow of library Active Directory that are available after the installation of the plugin AD and the vCenter Orchestrator Server service restarts.

• vCenter Orchestrator 5.5 has no vCenter workflow in the library.

  Hello

  We simply configure vCenter Orchestrator in our vCenter Server to familiarize themselves with it.

  In vcenter Orchestrator client and vSphere Web Client, we do not have the vCenter workflow in the library.

  

  We have the same thing in the Web Client vSphere.

  Remove the vCenter Plugin and install it again and it does not work either. In the newspapers of vCo, we have nothing that speak the vCenter, PlugIn, except for installation.

  In our configuration page, everything is green:

  

  Anyone have any idea?

  Thanks for your help.

  Under plug-ins in your vCO Configuration page, make sure that the plug-in vcenter is actually active. Also, go in the troubleshooting of Setup page tab, and then in the right pane, click on the link that says "Reset current version". Once you have done this, restart the vCenter Orchestrator Server service. The restart should trigger a re - install the plug-in that is supposed to give rise to import the package for each plugin so that you have all the workflows library in the vCO Client

• vCenter Orchestrator Workflow - sanitation

  Can anyone help to create a workflow to automatically correct the hosts?

  Thank you

  Hello

  Can you be more pls developed on your condition?

  If I understand correctly, you want to use VMware Update Manager in the Orchestrator product and would like to create workflows. Currently, this is no plugin for AUVS in vCO, so it is not possible to take advantage of the feature VUM in vCO. Incase my understanding is incorrect, pls correct the same.

• VMO cannot create the new workflow

  Much like the other postings around the Internet, I am connected to th Orchestrator v4 client.  At lower left, that he says that I'm connected like me and Media Administrator).  I guess that means that I am part of the Administrators group that I created on install and VMO properly applied my credentials.

  The problem is that half of my options seem to be grayed out.  I can't create new workflows, I can even add a new category.

  Research on this problem, it seems that the same question is asked and then the solutions just kind of drift off, there was however a response indicating that my license could play a factor in the present.  It was my impression that Orchestrator came free with vSphere, but maybe not really.

  The systems I use it's on is currently licensed as vSphere 4 Essentials, this could be the problem.  I'm having a hard time finding the documents and information on Orchestrator so I was hoping someone here could answer this question.

  Thank you for your understanding.

  Yes, that's exactly the problem - the "essential" does allow you to run workflows that have already been created. To reproduce, create and edit workflows, you must have a 'Standard' or better license.

• Cannot register or update of server vCenter vCenter Orchestrator on extension

  All hell, we could not register or update of server vCenter vCenter Orchestrator on extension. Common error occurs when try add a vCenter, com.vmware.vim.vmomi.client.exception.InternalException: "ServiceInstance" thrown exception unexpected "java.net.UnknownHostException" with message of managed objects ' new virtual Center host: name or service not known not ' when calling method "getContent" - Suresh

  Issue slipped after re-entry vCenter and SINGLE authentication certificate. -Suresh

• VMware vCenter Orchestrator Server service cannot be started

  After doing a clean install on the build version 5.1.1 2942, the VCO service will not start. All points configurations are green, VC to the top and running, the service account used for the service of a member of the local administrators. The event in the system log id reported as 7024, below error text:

  VMware vCenter Orchestrator Server service stopped with the error service particular incorrect function...

  If anyone has an idea, please advise. Thank you.

  Thanks for the tip. I was able to start the service by stopping the Foglight Quest agent running on the box first, then by restarting VCO. The article stresses that increase the RAM would help, however the virtual machine has been set to 10 GB, with abundance available for the JAVA virtual machine, but I always saw the issues mentioned in the wrapper.log file.

• How to make a call from CPO to vCO (vcenter orchestrator)?

  How to make a call from CPO to vCO (vcenter orchestrator)?

  Hello

  I am trying to create a workflow that would connect to a vCO.

  I was Expecting

  1. how to create targets for the vCO and

  2. how acess that target.

  Concerning

  Shiva

  1) there is no target for the vCO. We have a target/connection to Virtual Center (vCenter)

  (2) If you want to make vCO calls you could do, it all depends on how the API is structured. You can make calls via web services or CLI, etc.

  If you give your use case it is perhaps more to discuss. If you need an ENH or put something in, you can open a case with the TAC.

• VCenter Orchestrator certificates

  If I import a certificate from a vCenter Orchestrator, and then afterwards I implement PKI to give my vCenter a certificate approved, will be my workflow who fail vCenter until I have import the new certificate?

  Thank you!

  Hello

  I think it will be. If you plan to change the cert of the vRO also I think that the order should be:

  -Change the certificate of the vRO. If you are using a public CA certificate that all the imported certificates will be deleted form the keystore that we create new keystore in the present case.

  -Change the certificate of vCenter.

  -Import the certificate vCenter vCO.

  You might find this interesting:

  How to change the SSL to a vCO device certificate

  How to change the SSL to a vCO device certificate | Kaloferov spas & #039; s Blog

  How to change the certificate SSL of WIndows installed vCO

  How to change the certificate installed WIndows SSL vCO | Kaloferov spas & #039; s Blog

  vCO Workflow to automate certificate generation process

  vCO Workflow to automate certificate generation process. Kaloferov spas & #039; s Blog

• Internal error trying to add vCenter Orchestrator Endpoint

  Hi team,

  I am trying to configure vCAC 6.0 using the inbult Orchestrator 5.5.1 However when I try to add the vCO by accessing Home > Administration > Services Advacned > endpoints and click on the + adds vCenter Orchestrator plug-ins such as endpoints so that you can create service plans with Advanced Services Designer and publish the workflow as catalog items. I get the following error:

  Internal error An internal error has occurred. If the problem persists, contact your system administrator. When you contact your system administrator, use this reference: d6c92026

  I tried to connect to vCO by using the following accounts, but this has not helped to solve the problem:

  [email protected]

  [email protected]

  It seems to me that the error is always flagged only when I try to run the task above. Can someone please help me solve this problem?

  Thank you

  Arun-

  https://Twitter.com/arunpande

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

  8281 is the correct port. Probably, you must use Basic authentication and insert the credentials of the user that you use to sign in to the vCO client.

• Interaction with OpsCode Chef HTTP vCenter Orchestrator v5.1 Update 1 REST API

  Interaction with OpsCode Chef HTTP vCenter Orchestrator v5.1 Update 1 REST API

  I need to be able to use the HTTP REST APIs to run commands on the server of leader during the commissioning and decommissioning of virtual machines.

  Chef Server API Documents

  This requires the ability to use the SHA1 algorithm and also the Base64 algorithm in vCenter Orchestrator v5.1 update 1 to create the header of hashes.

  Method: HTTP_METHOD

  Axes of path: HASHED_PATH

  X Ops-content-Hash: HASHED_BODY

  X Ops - Timestamp:TIME

  X Ops - UserId:USERID

  where:

  • HTTP_METHOD is the method used in the API request (GET, POST, and so on)
  • HASHED_PATH is the path of the query (/name_of_endpoint for the server open source) and/organizations/organization_name/name_of_endpoint took the head or private Chef. The HASHED_PATH must be hashed with SHA1 and encoded using Base64 and should not have repeated oblique (/) or end with a bar slash (unless the path is /).
  • The private key must be an RSA key in the SSL .pem file format. This signature is then divided into strings (of not more than 60 characters per line) and placed in the header.

  The server of crypts that header and ensures its content corresponds to the content of unencrypted headers contained in the request. The timestamp of the message is checked to ensure that the request has been received within a reasonable time. An approach to generate the signed headers is to use the authentication mixlib, which is a header based on a class signature of authentication object similar to one used by the Chief customer.

  Any help with this would be greatly appreciated.

  Perfect timing!  I was just finalized this week the docs and test of a package for the Chef Server API:

  CHIEF Server Workflows

  Let me know how it works for you!  Of more if there are other points of termination or I missed scenarios, they should be easy to add.

• Cannot create a new user

  I just installed the plugins from Active Directory 1.0.2 and I'm trying to a create user AD using Orchestrator 4.2.0 script. I use Windows 2008 R2 as my Active Directory server.

  I get this error when I use the port 3286 (using GC):

  "Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53-00002035: LdapErr: IDDM-0C090BF4, comment: operation not allowed through port GC, data 0, v1db0] (Workflow: NewUsers/Create User (point 7) #6) »

  I get this error when I use port 389 (the default port):

  "Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53 - 0000052D: SvcErr: IDDM-031A120C, problem 5003 (WILL_NOT_PERFORM), data 0] (Workflow: NewUsers / Create User (point 7) #3) (Workflow: NewUsers/Create User (point 7) #6) »

  Configuration server-side seems good. I use the same information as the LDAP configuration (without the box copy) and I use a Director as the user (until I can fix this error).

  It's the line of script that may cause the error:

  userOU.createUser (domainName, accountName, displayName);
  

  where accountname, domain name, and displayName is string and user is a valid ORGANIZATIONAL unit selected using the graphical interface.

  Someone has any idea how to solve this problem?

  Thank you

  Phil

  Quite possible restrictions on password as Joerg says... If this is the case, you must configure the AD plugin to use SSL - to do this, you must import a domain controller authentication certificate to vCO. This certificate will allow the vCO establish a secure connection to your domain controller to create new accounts of users per password

  Good luck!

• Change the default Web pages display in vCenter Orchestrator

  , I've been dev tests vCenter Orchestrator for BYU and have aired on a question. Recently, I ran across a tutorial posted on the website of the vCO team (http://www.vcoteam.info/learn-vco/create-a-simple-vco-self-service-vm-provisioning-portal-part-2.html). I also have a display of Web pages can I customize myself (because you can't do this at weboperator).

  The problem that I am running is the following. I've traveled MY CUSTOM web display to run a workflow (in this case to set up a virtual machine), and he asks to my e-mail to e-mail account. By clicking on review and approve the application, it automatically attempts to call the display of pages web weboperator (that I don't have published and will not be published).

  What I want to know is how have Orchestrator call MY display of webpages of these interactions, as I intend to do some customization on my display of web pages.

  Thank you!

  Part 3 of our series was published today and walks you step by step through the process.

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• Create a workflow to upgrade VMWare tools

  We have an alert to tell clients VMWare tools is out of date, can someone create a workflow that would allow them to begin the upgrade.

  ActionPack for VMware vCenter does not provide the necessary steps to create this workflow from including 5.5.8 release with vFoglight 6.5.1.

  We CAN fix this in future versions. Stay tuned.

  PS: Sorry for the late reply