vCenter Orchestrator 5.5 has no vCenter workflow in the library.

Similar Questions

• ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  Error changing modules | Lightroom

• Add vCenter Workflow error: unexpected status code: 404

  Hello

  I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.

  If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully.  This does allow me to run workflows against the vCenter.

  When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)

  Any ideas why check YES causes this?

  My entries:

  Host: fqdn.servername.com

  Port: 9443

  Path: /sdk

  Ignore the Cert: Yes

  Thank you.

  Hello

  This error probably means that the port number is incorrect.

  Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?

• Replace the vCenter without redoing the vRanger connection configuration?

  Hi all

  Experimenting with the new device of VMware vCenter, I ran into a problem with vRanger connection.  I disconnected a host of our existing facility of vCenter and added successfully to the new VCSA.  I also added the new VCSA vRanger connection configuration.  vRanger connection sees the new vCenter, as well as the ESXi host on the new vCenter.

  The problem I see is that jobs do not now for the virtual machines on the host has moved.  I can see the jobs tab in my work, but when I try to run one of them, he fails almost instantly:

  Inventory [vm-11529] node is on a disconnected virtual circuit:

  The work is no longer present in my inventory tab, under the virtual machine in question (I have individual tasks for each virtual computer).  Is there a way to retarget 'with' the new vCenter without having to set up new jobs for each virtual computer after migration?  My concerns are the time to set up 30 + new jobs, the possibility of having to do a backup complete out of sequence, and our peripheral dedupe (ExaGrid) see this new backup as a new source of backup, causing the backup to break chain and forcing the use of the double the hard drive space on our ExaGrids until our retention period is completely recycled (3-4 months).

  Any ideas?

  Thank you

  Judge Quinn

  Quinn,

  Let me be clear. Now your ESX hosts are managed by VCSA, and this one has its own new database. In this case, all the stored in the configuration store object ID is invalid. I'm not familiar with VCSA yet, but if it works with VMware PowerCLI, you should be able to get new IDS and update InventoryNodeVirtualizationObjectId in the BackupTemplateTask table.

  Here is a PowerCLI procedure to get new VM ID. It works with regular, not sure of VCSA VC.

  SE connect-VIServer

  (Get-VM-name ) user.user

  Andrew

• Yellow triangle in vCenter Server after the complete update 4.1 2

  After the upgrade of my host ESXi 4.1 with full update 2 (via the Update Manager), I see a yellow warning by this host triangle in vCenter. Has tried to look in the logs and events, but found nothing suspicious.

  Thanks for any help.

  HM

  Take a look at the contents tab of the host with the yellow triangle.  Configuration problems is displayed at the top.

  It could be that syslog is not configured.  Update 2 checks for that while the previous version are not.

  If this is the case you can simply assign the syslog by default for ESXi location, go to the Configuration tab, under the software, select Advanced settings, down to syslog, the syslog.local.datastorepath enter [] / scratch/log/messages as shown below.

  

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• SRM 5.1 Add vCenter VM to the protection group

  Hello world

  Add the protected site of vCenter VM in the protection with your other VMS protected group? It is advisable to do so? Thank you!

  You must include ONLY the virtual machines that you want protected on the lun. These must be in one or more Protection groups. All other VMS must be on different LUNS.

• I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hello Cy1989,

  Check the items below in your vCenter server.

  1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

  2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

  3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

  4 Vefiry database are running and all required database services are running...

• Problem migrating Vcenter server from the old cluster to the new cluster?

  Hey guys,.

  Just came across this situation, and I don't know what to do. I pass my vcenter server older glomerulus with hosts of esx4.0, to a more recent cluster with hosts of esxi4.1. The material of host machines are different generations, and vmotion don't migrate vcenter because of the cpu sets between cluster mismatch. If I could turn off the virtual machine and migrate it would work, but since it's my vcenter Server I can't do.

  Should I restore it on the new cluster?

  Thanks for the suggestions/tips

  Kevin

  Connect directly to the ESX host using your client vsphere, vCenter vm shutdown, vCenter remove inventory, then go to the new host, browse the data store on the vCenter vm is, and add the vCenter Server inventory.

  This assumes that the same storage is presented to both hosts.  If this isn't the case, you will need to use winscp or something similar to copy the files from the virtual machine.

  -KjB

• V5 vSphere Client VI - connectivity to vCenter Server via the non-ideal DNS configuration

  Here's a theoretical question that I fight for an answer at the bottom.   For example, the question is:
  ..
  You have a VI Client in Active Directory (AD) domain n ° 1 with its own DNS, DNS #1 System.
  You have a server vCenter and ESX hosts in AD #2 with its own system DNS, DNS #2 domain
  The vCenter server and esx in AD #2 servers have DNS entries in DNS as follows #2...
  vcenter1. DNS2.com
  Esx1.DNS2.com
  ESX2. DNS2.com
  However, in AD #1 the same servers have entered DNS DNS #1 as follows...
  vcenter1. DNS1.com
  Esx1.DNS1.com
  ESX2. DNS1.com
  The VI in AD #1 client must connect properly on the vCenter server, using the DNS #1 name vcenter1.dns1.com.   It's pretty obvious.  However, what happens when you start a console KVM remotely to one of the virtual machines on VMware ESX Server?  I don't think it'll work.  I think that the VI client is trying to communicate with the service console of the ESX Server hosting the virtual machine by using the DNS entry of the ESX Server that is known to vCenter server, IE esx1.dns2.com, which is not a FULL domain name in the DNS # 1 VI client.
  I need to review this issue for VC2.5U6 with ESX 3.5U5 and an implementation of vSphere 5, even though I think that it is the same for all versions.   Incidentally, I read KB749640, talking about DNS but I don't think it covers where the VI client is a DNS domain disparate with DNS names of the esx servers different to the one known by the VC server.
  I hope the above is clear.  Can develop if necessary
  Thank you, Jan

  ESX host name is esx1.test.com.

  In provided customer vSphre the hostname for connectivity is different. for example: esx1.prod.com, however this name is directed to the same host with intellectual property.

  To do this, we edit hosts file c:\WINDOWS\system32\drivers\etc\hosts.

• Update ESXi with VCenter VM on the host?

  I am trying to upgrade my host ESXi 4.1 4.1 Update 1, but the VCenter VM lies on this matter.  I have to do to make sure that the DB VCenter is not corrupt, or can I just stop, put the host in maintenance mode and using esxupdate?

  With shared storage, you can:

  • Make sure that you have not activated the mode of locking for guests
  • Stop the vCenter Server VM
  • connection to the host on which it is running and remove it from the inventory
  • connect to the host of the second, browse the data store and add it to the inventory
  • vCenter Server on the second host market

  Generally, you will use Update Manager (if you are using vCenter Server), but in cases where this is not possible, you can also use vihostupdate.

  André

• Migration vCenter database of the local instance to a remote server

  Hello

  My vCenter database is installed on the local server with the vCenter server.  When installing without DSN was created because the local database.  Now, I need to create a dedicated server to host the database but can't find where, in the current installation, I would like to change to vCenter point to the new location.

  I read these KBs

  KB.VMware.com/kb/7960893 - movement of the SQL Server to vCenter database
  KB.VMware.com/kb/5850444 - migration vCenter Server on a different host machine
  KB.VMware.com/kb/1003928 - troubleshooting the database data source used by the VirtualCenter Server

  Problem is that (1) there is no DSN, (2) the registry key is not there either, and (3) I cannot find what to change in the vpxd.conf file

  I am able to "migrate the database" and "can create a new dsn to point to the new location.

  So, the question is where can I find the current configuration of the database\dsn.

  I hope that's clear

  Hi VMGenie,

  The reason why it does not appear THAT DSN u is because your machine VC can be 64-bit and the vCenter uses 32-bit DSN settings.

  Open the C:\WINDOWS\SysWOW64\odbcad32.exe folder for this exe... it should show u the DSN settings.

  Please consider clicking correct or helpful if this information is useful.

• Just vcenter server in the server list.

  Hi all.

  When I try to add the vcenter server at VMAs with political aduth, it is with success.

  But vifp mailing lists don't show command just vcenter server no esxi.

  What I am doing wrong?

  vMA 4.1, ESXi 4.1, vCENTER 4.1.

  vMA is joined to the Windows domain.

  When you use fastpass, vifp or adfp, you can add a vCenter target or the host ESX (i). When you add a vCenter target, you do just that, just the target vCenter. In fact, he added not all managed host ESX (i) under this vCenter data. Although adding a vCenter target, that allows you to do is go through the credentials of vCenter to perform an operation on a given host also known as a "vihost" (more on that in a bit). The problem is that you must know the name of the host ESX (i) If you want to perform an operation.

  Here is an example to check what NAS volumes are mounted on a host ESX (i).

  1. you can do the operation directly on a host ESX (i) as follows:

  esxcfg-nas - l - Server [ESX_OR_ESXI_HOST] - username [USERNAME]-[password]-l

  2. you can also perform the same operation, but through vCenter:

  esxcfg-nas - l - Server [VCENTER_HOST]-[VCENTER_USERNAME] - username password [PASSWORD] - vihost [ESX_OR_ESXI_HOST]-l

  If you want to know all the ESX(I) hosts managed by vCenter, you can actually do it with just vCenter target being added at the VMAs. Here is a simple script that allows you to query all the ESX(I) hosts.

  Create a new Perl script, you can call it little matter, I just named it getVIHost.pl

  #! / usr/bin/perl

  use strict;
  use warnings;
  use VMware::VIRuntime;
  use VMware::VILib;

  OPTS::parse();
  OPTS::Validate();
  Util::Connect();
  Util::Connect();

  My $vihosts = Vim::find_entity_views (view_type-online 'HostSystem', properties-online ['name']);

  {foreach (@$vihosts sort {$a-> {"name"} cmp $b-> {"name"}})}
  Print $_-> {'name'}. "\n";
  }

  Util::Disconnect();

  Now, you can run this script on your vCenter and it will go through and print all the ESX(I) hosts:

  ./getVIHost.pl--serveur [VCENTER_SERVER]-[VCENTER_USERNAME] username

  If you want to add each host ESX (i) vMA, there is actually a utility in bulk who is not too well known that you can use to add them in the management of the vMA. Take a look at this page for more - http://www.virtuallyghetto.com/p/vmware-vma-vima.html

• atg.workflow.WorkflowException: the internal project has not been created.

  Hello
  
  I am trying to import data into the publication server using startSQLRepository, but it throws error when I execute the script below below.
  
  startSQLRepository m DCS. Versioned - repository/atg/registry/ContentRepositories/MediaRepository - import/C:\keystore\MediaRepository.xml-projet RajeevTest-user admin-comments on mediaexport
  
  
  Caused by: atg.workflow.WorkflowException: the internal project has not been created. Check that your project workflow has been initialized by the workflow engine
  at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:410)
  at atg.epub.project.ProcessHomeMethods.initializeProcessWithGlobalWorkflow(ProcessHomeMethods.java:343)
  at atg.epub.project._ProcessHome_Impl.initializeProcessWithGlobalWorkflow(_ProcessHome_Impl.java:53)
  at atg.epub.project._ProcessHome_ReposImpl.initializeProcessWithGlobalWorkflow(_ProcessHome_ReposImpl.java:3)
  at atg.epub.project.ProcessHomeMethods.createProcessForImport(ProcessHomeMethods.java:172)
  at atg.epub.project._ProcessHome_Impl.createProcessForImport(_ProcessHome_Impl.java:25)
  at atg.epub.project._ProcessHome_ReposImpl.createProcessForImport(_ProcessHome_ReposImpl.java:3)
  ... 8 more
  
  Help, please.
  
  Thank you
  Rajeev

  I already had this problem, I solved with Oracle Metalink [1038072.1 ID]
  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&ID=1038072.1

  Published by: Girard March 16, 2012 08:57