Cannot create wireless network

Similar Questions

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Satellite T135D - cannot detect wireless networks

  I bought a T135D early January.
  Everything was happy until one day my laptop decides it cannot detect wireless networks, and even less to connect to one.
  I don't think the T135 came with a manual switch, while in the BIOS it says it's on.

  The graph with the antenna and 4 bars charge is no longer at startup, or the light that lights up on the front of my laptop. It's frustrating to have this kind of problem so early in the game with the T135D.

  Any help would be appreciated.

  Hello

  The wireless network must be activated by pressing the FN + F8 key combination.
  Have you tried that?

  If not, please check it

  Of course, you must make sure that the WLan card driver is always up to date.
  Here you can find the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Vista cannot create a network map

  the two 2 computers running Windows Vista Edition Home Premium.  Network and sharing screens put in place identical.  On my computer (from the network and sharing Center), I can click on view full map and it shows my network card.  On the computer of my wife (of the network and sharing Center) she can click on view full map and it rises "Windows cannot create a network adapter for the selected type of connection networl.  I might add that both computers are 'wired' internet/router.

  Any help?

  Hi Duane_TN,

  Are your computer and your computer wife have chipset or card network NVIDIA perchance? or a Linksys router by chance?  This is a post in the forum of Linksys, you might want to check in to see if it applies to your computers:

  Symptom: Windows Vista computers are not put on the Vista network map. Or well, you get the following message when you try to view the full network map: "Windows cannot create a network adapter for the type of connection chosen network." To check go to: PANEL-> CENTER NETWORK AND SHARING. SEE the FULL map (top-right) and find either: A Windows Vista-based computer is listed down under: "the following peripheral discovered may not be placed in the plan. or You get the message, "Windows cannot create a network adapter for the type of network connection. Possible cause: The offending computer has an NVIDIA nForce Networking Controller whose property "priority and VLAN" to "priority"active & VLAN. Solution: Set the property 'priority & VLAN"to"Priority and VLAN Disabled"as follows: Reach: START-> CONTROL PANEL-> ADMINISTRATION-> COMPUTER MANAGEMENT TOOLS In the resultant "computer management" window select: DEVICE MANAGER (left side). "NICs" (right). Expand "Network adapters" and see if it lists a NVIDIA nForce Networking Controller. Right click on 'NVIDIA nForce Networking Controller' and select 'properties '. In the resultant 'NVIDIA nForce Networking Controller Properties' window, select: "Advanced"(tab) ". Under the list of the 'properties', select 'priority & VLAN. for 'Value' assign ' priority and VLAN disabled. References: ---------- How to get the Vista network map works on nVidia MB http://www.TechIMO.com/Forum/networking-Internet/197756-how-get-Vista-network-map-working-NVIDIA-MB.html Other things to check: Update to the latest version of the driver (65.7.4.0 works for me). Article referenced above indicates a previous driver may be bad.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PROBLEM! Cannot view wireless networks!

  Hi, I am currently running Win 7 Ultimate 64 bit on my office and cannot view wireless networks!

  I tried to use two wireless adapters and both show active although they cannot show all networks.
  LAN works perfectly well and when I try to add a wireless network, it is said "an unexpected error has occurred."
  I have updated drivers for two adapters to the correct version wireless and little. No yellow icon in the Device Manager.
  I also checked to see if power saving has been enabled for the device and power options that are disabled.
  Two wireless adapters are using a USB port, not PCI. I abandoned everything simply! I need some advice on how to solve this problem! I can provide more information if necessary. But please help me with this problem :(
  I also disabled anti virus software and my firewall!
  The wireless adapter, I am using is the:
  TRENDnet TEW-649UB Wireless USB adapter N speed

  UPDATE! :
  We have some progress I uninstalled all the previous windows updates and can now see wireless networks (such as firewall/AV). The problem I have now is that when I try to connect it said "Windows could not connect. He also says in the settings of cards tab my wireless adapter is "authentication attempt.

  Hi Tatiana,

  ·         Have you tried to install the drivers from the manufacturer's Web site?

  ·         Have you checked if the network card works on another computer?

  Download drivers card network from the manufacturer's website and check manually.

  http://www.TRENDnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1353

  Alternatively, you can deal with this problem due to security software. I suggest that disable you the security like anti-virus and firewall software and check if the problem persists.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Call the helpline for the manufacturer of your network adapter. It is likely that neither Windows nor the router have problems, it's just a matter of getting the configuration on both put in place settings to work properly together. The manufacturer of the router will be the best resource to learn how to configure their device.

  http://www.TRENDnet.com/support/

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  Hope this helps

• Intel WiFi Link 5100 network card - cannot detect wireless networks

  I have a HP Pavilion dv7-1270us. My wireless card is an Intel WiFi Link 5100.

  Running Windows Vista 64 bit, Ubuntu Linux, Linux Mint and Fedora Linux (various versions, all), the wireless works fine. My desktop computers to work with wireless cards to connect to the network work very well, and all computers (except mine) to connect to my home network very well; which means that it is not a problem with wireless networks, or with my network card. I try to manually connect to the network, but it can't find it. Diagnosis requires that the card is disabled, and that I should turn it on via the switch on my laptop running: fact.

  During the installation of Windows 7 64 bit, I cannot see wireless networks (and therefore unable to connect). Re-formated and reinstalled again, check the wireless connectivity between each batch of Windows Update, but it has never worked.

  I downloaded the latest drivers from Intel, via Microsoft Compatibility Center (version 15.2.0 driver).

  There is no system restore option because he has never worked as a first step, except in all other OS, I got on the computer. Microsoft Compatibility says the map is compatible, then Device Manager shows no problems. The network adapter is active via switch on my laptop.

  Happy that you guessed it sorted!

• My office wireless icon is x'd - cannot detect wireless networks.

  My computer screen suddenly went black this evening - the monitor was still, the fans were still humming, but it was totally insensitive.

  I forced a stop, and when I rebooted the computer, my wireless icon has been x'd out. My computer cannot detect wireless networks (there are a half-dozen or more in my building). I tried a good stop and restart, but the problem was still there.

  The Network Diagnostics tool told me to check the router, so I did--but all other devices in the House are connected very well. I thought it would be a malware, so I ran a MalwareBytes scan, which turned up nothing. Then I reinstalled the drivers from the card WLAN - no luck there.

  System Restore has not solved the problem. ipconfig says "media state: disconnected ' for my WIFI adapter, but I don't know how to fix this. In the devices, the Broadcom WLAN card Manager, he says "this device is functioning correctly.

  I work from home, so it is important that I can access my wireless. Help, please!

  Hello

  I imagine the inconvenience that you are experiencing.

  1. What is the brand and model of the computer network adapter?

  2. This error message with him modeling icon?

  3. do you have a code error message when you try to connect to the internet?

  Here are some steps you can follow to resolve the problem:

  Step 1:

  Check if the network adapter is enabled, if not, please go ahead and enable the network adapter. Please follow the steps:

  a. open network connections by clicking the Start button, then Control Panel. In the search box, type adapterand then, under center network and sharing, click view network connections.

  b. right click on the network card and do one of the following:

  -To disable the network adapter, click disable. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  -To enable the network adapter, click Activate. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-a-network-adapter

  Step 2:

  Try to reset the TCP/IP settings:

  Reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357/en-us

  Step 3:

  Flush the DNS and request a new IP address of your ISP server by following these steps.a. Click Start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Internet disconnects and cannot find wireless network periodically. I have to restart to fix it temporarily.

  SOMEONE HELP ME PLEASE!  I have a very old laptop, since 2002, I think, that is running XP Home. Recently my laptop started to cut all of a sudden and then cannot find the wireless network. I know that this is not the WiFi because my other laptop works very well. When I restart the laptop, it works up until I try to download something and sometimes turns off while I'm browsing. I have a RTL8185 wireless card, which I replaced it with the same model. Still no change. I spent weeks in different forums, try to understand this point, and I don't have a chance.

  I thank very you much for your time. I called my ISP and he told me to try restoring the system to determine if it was the settings or if it was the hardware. Instead, I decided to search the Internet how to speed up my network because Chrome was really slow on the cell affected.

  I happened to run across this Web site
  http://tweaks.com/Windows/37934/hacking-Windows-XP-speed-up-your-network-and-Internet-access/
  When I disabled all protocols except TCP/IP Protocol, the network WORKED! Now the Internet works, I can download large files and browse shared files with the same speed as my other laptop!
  I hope this can help someone else with this problem!

• Cannot detect wireless networks or start the autoconfiguration Wlan service

  I locked my phone on thanksgiving day and came back later that night and connected... and my Wifi wasn't working. It shows all the available networks.
  

  -I am still able to connect to the internet via the Ethernet cable
  -My wifi switch is in the on position
  -In the Device Manager it says that it is WORKING CORRECTLY
  -It displays a red x in the taskbar, indicating that theres no link and no network available
  -When I go to control panel > network and Internet > network and sharing Center Center it is completely empty, nothing is there... only 4 icons... nothing else.
  -It does not show the button wireless in Windows Mobility Center more
  -J' bought a Linksys wireless adapter and it will not work unless I have activated the wireless network Manager windows... which I am not either.
  -J' uninstalled and reinstalled the drivers from the Web from Toshiba site
  -J' did a system restore and it didn't

  -My modem works fine

  -Other home computers are able to connect to wireless modem

  This is what it says when I try to start Wlan AutoConfig 0xc00ce508:0xc00ce508 of error «Windows failed to start service autoconfiguration WLAN on local computer»

  I did a 'sfc/scannow' in the administrator command prompt and it said "protection of resources windows found corrupt files but was unable to solve some of them"

  Nothing works.

  Please help me, it drives me crazy. Thank you very much in advance :)

  Hello

  If everything checked OK wise network, and you have mentioned before: ' sfc/scannow' in the command as administrator prompt and it said "windows resource protection found corrupt files but was unable to trouble".

  It is perhaps that some kernel files are corrupted and cannot be updated.

  Refresh the Installation of XP.
  

  To be safe, back up your data and some special stuff to a flash drive.
  

  ----------------------------------

  Boot from the original XP CD. Pass the first screen offering Console repair and proceed as if you install a new XP.

  After accepting etc., the new Setup screen lights up and would detect the current XP installation.

  You have an option to press R to repair.

  Use it, would take about 45 min. and you would an Installation of XP refresh all by keeping your Application, data and XP configuration.

  P.S. If you have made changes to the WinXP definition (special permission as firewall) security to look on them after the update because they could go back to the default value.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• Satellite P300 and Win7 - cannot see wireless networks

  Hello

  I have Toshiba Satellite with Win7x64 and I bought on eBay an AR5008.

  If I boot Linux I can connect to wireless networks.
  However if I boot in win7 that I can't even see wireless networks. If I run diagnostics I get the radio is turned off.
  Even with ConfigFree I get the same message, even if the switch on the front of the laptop is on.

  What can I do? I tried all the drivers!

  Hello

  Normally, you can enable or disable the WLAN connectivity by using the equipment and the FN + F8 key combination switch.
  Did you check that?

  I guess for the FN + F8 key combination you need value-added package. You can download it on the Toshiba site.

  Last but not least, works WLAN with preinstalled OS from Toshiba?

• ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10

  Hello

  I have problems connecting to networks wireless on my HP ENVY 14 Sleekbook (14K074ca) TS. Networks are available, as I am able to connect via my phone and other PCs.

  I tried the network troubleshooting and it failed. I've updated the network wifi drivers. I turned the button wireless on and outside. Nothing works.

  I noticed this change after a recent update of windows 10.

  Can anyone provide any help?

  Thank you.

  Hi@philipmanzano,

  Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how to publish and more

  I understand that after a update Windows recent 10, you are having trouble connecting to wireless networks. Please read this post from @Great-Christine-Tree Commons fixes for wireless connectivity problems. Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• Satellite P10 - 304 cannot install wireless network adapter

  Hi, I recently ran a cover of my SP10 with recovery disks, I had with her. Since the resumption of the internal wireless network adapter is not working... the lights when I turn it on using the switch on the side and when I try to install the drivers with the tools and Utilities CD I got with the laptop I get the text next message in a DOS window...

  *********************************************
  Installation ' wireless network driver. "
  *********************************************

  NG - driver was NOT updated!
  (INF file may be incorrect or invalid)
  NG - driver was NOT updated!
  (INF file may be incorrect or invalid)

  ***************************
  Failed installation *.
  ***************************

  Press a key to continue...

  any help or contribution would be that popular... Thank you

  Post edited by: fetch

  Hello

  The wireless network card is listed in the device under network adapters Manager?

• Create wireless network with airport Time Capsule

  I replace my ISP provider rented the modem / router with a modem, I bought and I would use my gen current airport Time Capsule to set up the wifi network. I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  I am running OS X Capitan 10.11.3 on an early 2015 MacBook Pro.

  Thank you!

  Dale

  I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  Hmm.  A time Capsule is an AirPort Extreme with a built-in hard drive, so what works for one should work for the other and vice versa. You might be looking at old operating instructions?

  Since you've decided to add a new modem, Time Capsule will be reset back to the default settings and then set it up again to work with the new modem.  Apple installation "wizard" will guide you in installing the time Capsule, by appointing a wireless network, set up a password, etc, so the process is very easy to name.

  The installation provided with your Time Capsule Guide goes on how to set up the time Capsule.

  After resetting the time Capsule to factory default settings, you would connect an Ethernet cable from the modem into the "O" on the Time Capsule WAN port.

  To get the "Assistant" Setup running, just click the WiFi icon at the top of the screen of the Mac and are looking for the new AirPort base station. Just below that, click directly on the Time Capsule.  The example below shows an AirPort Extreme, but you would see on your screen time Capsule.

  

  When you click on the Time Capsule, the next screen that is displayed looks like this, except that you will see a picture of a Capsule of time on your screen.

  

  Simply click next to get the process going and follow the instructions.