Cannot delete a print job on printer nonreal

Similar Questions

• Windows 7 - cannot delete a print job.

  I have two problems with my Windows 7 computer to print to my hp LaserJet 4 printer P.   This is the first of the two.  My 4 p of hp printer has a standard printer to the rear connector of the it, and I have in the past plugged into my computer printer LPT1 outlet.  My computer hp Pavilion (a1520n), however, does not a LPT1 port, so I use a USB-to-printer cable as the way to send jobs to print on my printer.   I've never had this problem before with this printer when he ran with Windows 98, and Windows XP (with LPT1-to-printer cable).

  (1) first problem: Windows 7 will not delete my print jobs, or only partially removes them.  When I go to "Devices and printers" and then click on my icon of the printer hp - 4 p and then click on the "See what's printing" on it, I get a window up, which shows print jobs (same window base as in XP, other earlier operating systems).  I then click on the print job I want to delete and then click on ' printer-> cancel all Documents. "  Windows 7 does not delete it.

  I read the other posts in this forum for the removal of print jobs and in any case, I need to do something extraordinary, and it only works for a print job - so it must be done for each print job I want to remove.   Things like type a series of commands in the immediate window, or go delete everything in the printer spooler file, and then restart the computer.  Although they operate (allegedly), they seem to be extremely clumsy ways to have this address for each print job fails.

  Is there a better, easier, way to do this - as defined a parameter in Windows 7 to a different value?   Anyone has any ideas on this?

  Thank you.

  Hello Sheyenne,

   
  Thank you for an assignment in Microsoft communities.
  I can understand how frustrating it can be when things do not work as expected.
   
  The probable cause of this problem could be due to use a parallel port for the USB adapter for printing.
  This is because the printer works on another USB port where it has been defined, or you are using a USB hub.
   
  You can solve this extra Pages S1M printing problem by disabling bidirectional support:
   
  1. press Windows + X key together on the keyboard button.
  2. Select Control Panel.
  3. do the small icons display and select devices and printers.
  4 right-click right your printer, choose Properties
  5. go to the ports tab.
  6. click on Enable bidirectional support.
  Note: Your printer must be switched on before printing.

  These steps stop print extra page "S1M.

  To delete and remove the impression spooler steps:

  1. click on the Windows button in the lower left corner of the screen. Select "Control Panel", then "hardware and sound" then on "printers".

  2. double-click on the icon of the printer to which you sent the print job. Find the print job from the list that opens, right-click on it and select "Cancel".
  3. press the button 'Cancel' on the control panel of the printer if employment still doesn't come off the spool. Turn the printer off, and then on to see if that removes the print job.

  4. clear the whole spooler by clicking the Windows icon, and then type "command". Right-click on "Command prompt", then click "Run as Administrator".

  5. Type "net stop spooler" and press "enter." Type "del % systemroot%\System32\spool\printers\*/Q" and then press "Enter".

  6. Type "net start spooler", then press "enter". Type 'exit' and press 'Enter' to close the command prompt window.

   
  If you still have questions, I suggest you to connect with the Forums to Support HP printer:
  http://h30434.www3.HP.com/
   
  Hope this information helps, just reply to the State of the question for all of the help on windows.

• Cannot delete the printer driver

  Hello

  I tried all the options in this thread... .no joy.

  I am running Windows 7 and I want remove driver for my printer.

  System say it is to use and cannot be deleted.

  I am the only user on this computer.

  Help, please.

  Hello

  Thanks for posting your question in the Microsoft Community.

  You seem to have a problem with the removal of your computer printer driver. Check out these links, many users have confirmed that they were able to solve the problem by returning the suggestions mentioned in the following links:

  I want to remove/erase/print driver to Windows 7 and can't find any documentation.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-want-to-removedelete-PrinterDriver-from-Windows/6700d817-cfb7-4D94-904e-25bc8f435c7f

  Cannot remove a printer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-remove-a-printer/7017fe93-621a-4f58-aa47-f70968e40723

  Hope that this helps, please let us know if you need further assistance.

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• HP Deskjet 2540 cannot delete a print job

  I have a Hp Deskjet 2540 I want to cancel a print job to page 8, and I can't remove it outside of Quebec, repeat me the removal

  but he won't, I use a wireless connection. I tried to use the cable connection, but it is not yet clear.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• Cannot delete a print job from Quebec

  7310 HP all-in-one.   Electricity was interrupted during a print job.  I can't delete this job from the (QC) I have used the keyboard delete, cancel in the menu, cancel on the printer.  I have successfully deleted all other pending print jobs.  I turned off, unplugged and turned back again.   Certainly, I hope someone can help with this problem.  Thank you in advance Jackson

  Please mark your post as the Solution so that other users with the same issue can benefit from this thread.

• photomart 5520: cannot delete a print job from Quebec City

  I noticed that my printer was not print projects. I opened the Quebec and discovered that a draft that I sent to print two nights ago was still in Quebec and had not been printed. I deleted all of the projects that have been sent to the printer today with success. I'm not able to remove this initial project, sent two nights ago, I assume that the origin of the problem. There is a sophisticated method to delete this project and get the printer running again? Thank you

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• Cannot delete a print job

  I am trying to cancel a print job, it will not be printed, but he said that the removal of status, but he is stuck there and won't print anything now.

  What I can do. I tried to turn off my printer and turn it back on but it's still there.

  Thank you

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

• Cannot delete the printer from the "printers".

  OfficeJet 6500 a Plus.  Connected by cable to the xp machine.  Has been used in wireless mode successfully for more than a year of a machine Win 8. Some how it did not work, but I could not remove the window 'printer '. I had to download and reload the driver to use the printer.  But I can not yet remove the printer "old."   The new printer is named "HP Officejet 6500 E710n-z (network).  The old printer is called "HP7F8C60 (HP Officejet 6500 E710n-z). Can't use it or remove it. Thank you.

  Thank you for your quick response.  I could just delete it by clicking on delete.  I went through the following sequence messy and finally had success.

  I have a right-click on properties and tried each element. I got error on each of them, messages which are the most common response (80%), "printer can not be deleted. Double check the name, and make sure that the printer is connected to the network'.» Sometimes, I would get an error code. (Mentally I was not ready to dig that right now.)

  I could not change the name, or connect to any network. I tried for a half hour and failed several times on each of the elements. Then I clicked on 'Shortened' again (I don't know why!). This time, it reduces the number of points on the 'properties' of 10 points to 5 or 6. The item "Refresh" remained. I clicked "Refresh", and the printer has disappeared! I do not remember the sequence, or how many times I tried each item, but I have to hit the right combination and when, because the wrong printer icon has disappeared, and the good printer works.  Thanks for everyone's interest and help.

• Cannot delete the print queue.

  having trouble getting the print job to leave the queue.  MSG is "suppression".  Went through all the steps from this point up to 'FIX IT'.  Help, please

  Problem with printing, you can also consider that run these tools:

  http://support.Microsoft.com/mats/printing_problems/

  It will automatically fix it.

• Cannot delete default printer WINDOW XPX DOCUMENT WRITER

  I have Windows 8 OS. I installed the printer Laser Canon LBP 2900 B on my system. Surprisingly, the printer available only in Word format. (Even in word, Windows XPX document printer is selected as the default printer. I can't find Canon in the list).

  In Excel or print PDF files, I have no option Canon drop to the bottom of the window. Whenever I have to register in as long as file .oxps then open it and print by canon.

  What I do for printer canon link to excel and Adobe Acrobat now?

  Thanks in advance!

  Try this:

  1. Click the button start at the bottom left of the screen, and then choose Control Panel.
  2. Go to "Hardware and Sound" and then choose "devices and printers".
  3. Find Canon printer in the list, right click and choose "set as default".

• Cannot delete the printer in Dell dimension 3000 XP Home Edition 32 bit race.

  Original title: have dell dimension 3000 with xp home 32-bit edition.

  have 3 old printers in Control Panel I can't remove... mike

  Hello

  1. what happens when you try to delete the printers?

  2. do you get an error message?

  3 are logged as administrator?

  I suggest you to start the computer in safe mode , and then try to delete the printers.

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Hope this helps and let us know if you need more assistance.

• delete the print queue

  Cannot delete a print (QC) have tried printing cancel but document is always at the bottom.  Managed to cancel other documents, even if none print due to the print queue that does not go away!   Have Windows 8 op sys

  None of the posted solutions seem to apply or solve the problem. Any suggestions?

  Gracias!

  Hello jldelvalle,

  Download and run the HP print and Scan Doctor using the below url...

  http://support.HP.com/us-en/document/c02073861

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Cannot delete printjob queue for HP 1310

  Cannot delete the print job from the print queue

  Cannot delete the print job from the print queue

  Open a command prompt window (start > run > cmd > OK) and type the following command.  Press ENTER after each line.

  1. net stop spooler
  2. del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]
  3. net start spooler

• Cannot delete print job

  Original title: when I delete a print job, it doesn't delete deleted printing spool it is said, but I have to restart the computer to remove so I can print another job

  Hi paulinedixon,

  o what is the number of brand and model of the printer?

  1. run the patch from the link below: printing problems and printing errors:http://support.microsoft.com/mats/printing_problems/en-us

  2. If the fix does not help, you can check out the link below and try the steps: how to cancel printing or to delete a print job that is stuck in the print queue in Windows XP: http://support.microsoft.com/kb/946737

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.