Cannot delete a save point after an upgrade to 11.2

Similar Questions

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Cannot enter 'log-in' page after the upgrade of VISTA SP1 x 32 SP2 with failure code 0xc0190036 340/47122 (explorer.exe)

  I was "forced" to upgrade my computer to SP1 to SP2 when I tried to download the latest msn who.

  The upgrade part wasn't serious and VISTA asked me to restart my computer after the upgrade. Then I REBOOTED.

  The problem came when the final stages of the upgrade, which took part after reboot. It was somewhere near STADIUM 1/3 or 2/3 and then suddenly all blackened. I'm POSITIVEMENT SAFE that my computer is connected to the power supply (mine is a laptop). And then when I start to restart my computer (the second time), I got this message

  0xc0190036 340/47122 (explorer.exe)

  Then I restarted and I got to a page where windows told me that my computer is not able to be marketed with success because of the recent changes I made.

  I did an upgrade from the night before, where I update the OFFICE GENIOUS sthsth (sorry, but I forgot the name). I need to upgrade this thing in order to be able to upgrade to SP2 (complicated huh? lol)

  I tried to use the recovery thing and save the thing but WINDOWS insisted that I do not have a recovery... I would say is quite disappointing...

  COMPUTER:

  HP 2133 NetBook

  VISTA HOME BASIC run x 32

  I ' ve done some searching on the web but found nth related code 340/47122 and VISTA HOME BASIC x 32 and SP2...»

  The last method I want to use is the method of parameters factory reboot, restore... so here I am, ask help from experienced users. I don't have any DVD or CD ROM for the restart or what. any method that can safe me to restart my computer?

  Million thanks,

  momikoo :)

  Hello

  Method 1:

  I suggest you to check if you are able to start in safe mode or last known good configuration. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select secure known mode/last good configuration in the list and press ENTER.

  Method 2:

  I suggest you follow the steps mentioned in the link given below and let us know if your problem is solved.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot create a PDF file after the upgrades: Adobe 9.2 and Mac OS 10.6.2

  After the upgrade to Adobe Professional 9.2 and Mac 10.6.2 I lost the ability to create PDF files.

  The printer Adobe (display says that the printer is v. 9.0) indicates the status of the job as "Mistake" and has the following message; "You must install the software to use this printer. To install the software, choose software update from the Apple menu. If the software for your printer is not available in software update, contact the manufacturer of your printer. »

  I get errors when I try to create a PDF from a Web page.

  I get the following error when I try to create a pdf from a word file: "Acrobat cannot open 'AAA.docx' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  To create an Adobe PDF document, go to the source application. Then print the document in Adobe PDF format".

  (I can create a PDF from jpg files... but I never really have a need to do this...)

  I uninstalled Adobe Professional by using the uninstall program (then emptied the trash and restart), then reinstalled Adobe Professional from disk (and restarted).  After the reinstallation, I always get the same problems, even if I get no error message until Adobe Professional updates from 9.0 to 9.2.  Before the upgrade Adobe, v9.0 attempts to print to pdf just act as the pdf is created (no error message), but I do not get a backup fast, nor is a new pdf no matter where the document is located.

  Help, please!

  With OSX.6.x, the possibility of using the Adobe PDF printer has been lost. See the ad at the top of this forum (known issues with Snow Leopard).

• Pavilion 15-ab043sa: cannot reset to factory settings after the upgrade computer laptop brand new 10 Windows

  I bought 2 new laptops, they seem to be special models not listed is not in the HP support site, purchased from Currys PC World in the United Kingdom.

  First HP Pavilion 15-ab045sa laptop computer 15.6 "-red, upgraded to windows 10 perfectly well and I made a backup of the system while I studied the creation of recovery media (this info must be printed with the laptop in the box, rather than letting the user have to find BTW)."

  The other a HP Pavilion 15-ab043sa laptop computer 15.6 "-blue, for my parents, has turned into a total disaster."

  The two models are the same, except that the first is red and the other is blue, that's why they have different product numbers?

  I was now in a position where the recovery on the D: drive partition is not a factory reset.

  I did not even recovery disks as having the first one to go smoothly, I thought the same thing would happen on the second laptop and I got the recovery disc then.   I tried to create a USB stick recovery, but I had no one who can save the system settings - need at least 32 GB free.

  This occurred as first I started the laptop, made of windows, MS Office 365 updates, added then waiting 2 days for windows 10 to arrive.  When it came it installed fine and then I added a printer driver for an HP printer and made some configurations of the operating system.  At the next reboot showed something was wrong as the boot took over 7 minutes.  As the synaptics app was referenced twice in the tab start Task Manager also had strange things in the system.  Rather than go back to a previous system restore point that I attempted to identify what was wrong and uninstalled all without success.  I then had the opportunity to go back to 8.1 for Windows or "reset the PC.  Not a lot of explanation on delivery to zero and certainly no warning options that the D: partition was no longer valid.  Windows options were "in my face" so I don't think watching HP recovery.  So I chose to run from Control Panel 'Reset the PC and keep the files'.  So, indeed, I now have a clean install of Windows 10 but have lost all applications that were on the factory orginal building.  I see no way to re - install all of these programs and find the license keys.  I have more HP recovery at all.

  So I have no way to put the blue doesn't return to the factory settings.

  Advice please, I want a laptop blue, the same as the red, i.e. Windows 10 with all applications that have come to the factory as well as the correct printer drivers and a time of less than 30 seconds of starting.

  You are not sure if there is anything I can copy from red to blue to get it going again?

  Any help gratefully appreciated, thank you

  You have the options of Chat or telephone. Mon - Fri 08:30 - 18:00. Sat 10:00 - 16:00.

  https://support.HP.com/GB-en/contact-HP/product/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8255007#Z7_3054ICK0KGTE30AQO5O3KA30F3

• Cannot install anything but XP after memory upgrade

  My friend had a hp630 running Windows 7 Home Basic, 32-bit. He went to a flea market of computers where they replaced the system memory with two new modules of 4 GB. The system running my end but apparently could not use more than 3 GB of memory by showing that 8 GB has been installed, he wanted a 64-bit system. Given that the system had been there for a few years and accumulated a lot of garbage, we have decided to do a clean install. So we deleted and recreated partition D: with Minitool Partition Wizard and tried to boot from an installation DVD. And here's the problem: no matter how much we have tried different versions of Windows, the only one that worked was XP with AHCI drivers embedded in the disc according to instructions on this forum ( http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/SATA-drivers-for-XP-solution-on... ). both XP sp2 and sp3 XP worked fine. However, Win 7 32 bit, Win 7 64 bit, Win 8 32-bit, win 8 64 bit everything has failed in a similar way: they would go by loading files (Win 7 shows a progress bar while Win 8 showed a logo) and then to reboot (Win 7 without warning, win 8 after a brief demonstration of an error with a sad smiley).

  So the question is, how I approach this problem? Upgrade memory to do the system incompatible with Win 7/8? Unfortunately, the original memory module has disappeared, so I can't go back to the original hardware configuration. Should I try XP 64 bit? I heard that this is not the best system to 64-bit, due to compatibility problems (some have been resolved in later versions). I may try it anyway out of curiosity, but in the meantime would appreciate advice.

  swuser68 wrote:

  Thanks for the quick response!  The machine has Core i3 - 370 M, which certainly is 64-bit capable. Windows ISOs, both legal illegal, don't miss, and device startup doesn't seem to be a problem, either: the computer accepts the DVD I did very well and copied the files from there, but then something went wrong.

  I did the format of the disk as the partition will, but I have not done anything with other partitions. Is - this possibe that Win 7/8 did not like fantasy HP partitioning? There are about 10 GB or partition so hidden, then 2 GB C: drive containing HP tools, then D: to E: and system for data. E: we did oursevles during initial installation for a long time it has so changed their size using MiniTool Partition Wizard. Windows XP has no problem with this disk layout, but perhaps the 7/8 behaves differently?

  Another thing I noted is that F11 at startup has no effect. Is it normal for a model that was sold without any Windows? Or is it possible that it reflects somehow the problem I have with installing Windows?  The absence of function F11 is because you have made changes to the recovery D: partition. Any changes made to the partition will delete the F11 recovery capacity.

  You will find that you have more success if you delete all partitions, then proceed with the installation.

  Let the Windows 8 or 7 Installer create and format partitions of its own during the installation procedure. Normally the C: partition is the system partition,

  I propose the first because you do a clean install instead of use the recovery disks created by the HP recovery media creator utility. Using the recovery media, scripts to create all the required partitions independently and install most drivers as well.

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Cannot delete AIM contact even after deletion AIM Buddy

  So he loaded up a contact I goal I went and tried to delete the contact that tells me "unable to delete the profile goal" I went to target on my desktop and deleted the boyfriend only to find the entrance always in my contacts and still tied to aim. Yes, I connected with lens in the hope he would notice the change in my lists of contacts, but alas, it did not.

  HAWP Meh!

  had the same problem. I had to disconnect my lens on my phone. delete the account, then sign in. problem solved.

• Cannot activate Win XP Pro after hardware upgrades.

  Win XP Pro 32 bit. SP3 76487 ID-OEM-0027903-55213 I got this program for over 4 years with no problems.

  P4 2. 5 g

  in total, 4 g of RAM, 2 GB just installed.

  drive C: 160 g with the OS on it.

  120 g for data D: drive, etc. New install.

  2-drive r/w DVD we're new install.

  After you install a second hard drive, 2 GB of RAM and an another DVD player, I get a message that Windows must be enabled.

  The message does not specify that the OS is not genuine. Only, she states that because of new additions of material that I have to reactivate.

  When I click on the ball to activate, nothing happens, no glass icon:. I waited half an hour the last time. Connection Internet is fine.

  There is NO icon "activate Windows" or selection in Accessories > System Tools folder.

  If you could provide me with the phone number I will call to activate by phone.

  I DON'T want to reinstall Windows and losing all my links program.

  Thank you

  Mark

  Hi Mark,

  Follow the steps in the article.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Cannot play videos on itunes after the upgrade of the software

  Original title: I just changed my monitor and also upgraded itunes and now itunes won't play my videos, can anyone help me with a fix to this problem?

  I just changed my monitor and also upgraded itunes and now itunes won't play my videos, can anyone help me with a fix to this problem? Error says windows has everything change, return to base, while itunes is open. my itunes icon has a bit of security shield on it. It's also generating a dialogue box that says iTunes has stopped working and windows is looking for a solution.

  Hello

   

  1. do you receive any error messages?

  2 are you able to play video files in other media players?

  If the question is limited to iTunes, then I suggest you to reinstall the software and check if the problem persists.

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also get help on iTunes support site:

  http://www.Apple.com/support/iTunes/

• files cannot be opened in bridge after indesign upgraded 2015

  Hello, set level to 2015 2014 version Ind. (windows 7 64-bit, 6 GB of ram, Intel Xenon 3550 W). First 2015 is extremely slow to commissioning.

  However, most annoying problem is that in trying to open the files in the Explorer or the bridge, I get a note this file extension is not recognized and/or related

  a program and does not open. However, I can open the file in indesign 2015. Save the file again in the 2015 version does not resolve the problem.

  Thanks for the help

  To solve the problem in Windows Explorer, you must change the file association in Windows for the extension .indd. Not being is not a Windows user, I leave it to others to explain

  However, the Bridge has its associations of files in Bridge preferences > file type Associations.

• Cannot use/register LR 6 after the upgrade to Windows 10

  Good evening

  Using Lightroom 6 DESKTOP application (no CC or clouds) on Windows 10.

  I upgraded my Windows 7 to Windows 10.

  I did not have to 'turn off' my computer before proceeding with the installation,

  Now, I try to reinstall Lightroom 6 and I get the message:

  "The xxxxxxx serial number is already in use by the maximum allowed value of computer.

  You must disable another computer or provide a different serial number... "

  I can not find on the Adobe web site where I can disable or reactivate my LR6 serial number to use on Windows 10.

  6 of Lightroom is already installed and enabled on my Mac Book Air (and works); As far as I KNOW, I can use the same serial number on my Mac laptop and my Windows desktop computer.

  
  

  Where should I go to the adobe web site to see which computer are enabled so that I can clean that?

  
  

  Thank you

  
  

  Max.

  
  

  HI Mel,

  I have reviewed your account and sent you a private message.

  Please go back to a private message.

  ~ UL

• Cannot delete the Bootcamp partition after erasing it

  Hi, I did not read on BCA before I went into disk utility and erased my bootcamp partition.
  So now, I have my 250SSD showing 200 GB partition/600 MB free space/50 GB Bootcamp.

  I tried most of the things I've seen on the forums and nothing seems to work.

  If it makes a difference, my goal is the 2012 rMBP factory reset.

  Heeeeeeelp!

  You have a time Machine to the top of your Installation of OS X? If so, please see Re: doesn't have windows via bootcamp 8.1 installation .

• Cannot download videos real player after that upgrade to 6.o. 5.0 has been authorized.

  I've updated for Firefox 6.0, and now I can't download videos of You Tube in real-time. Do not get the pop up box to download the video, or choose to download when I right-click. Firefox 5.0 downloaded videos without problem. Have the latest version of real player and flash.

  Ken Schwegler
  ([email protected])

  Your version of RealPlayer is probably obsolete. Try this:
  Open RealPlayer >
  Click the menu drop-down (top left of the screen) >
  Click Find updates >
  V.14 RealPlayer update

  VOILA!

  )

• Cannot access local data store after the upgrade to build 158869

  I've been running ESXi 3.5 on a Dell Optiplex GX620 (A07 BIOS, a single SATA hard drive) for a few months now.  This morning, I applied the update version 158869 in the system with the Infrastructure Update and rebooted, it.  In the Infrastructure of the customer, I now get a banner stating "VMware ESX Server has no persistent storage" and I'm unable to access the local storage on the system.  I have tried rebooting, changing the SATA operation mode and a rescan for new devices storare and VMFS volumes, all nothing will do.

  Does anyone have any ideas on how I could get the server to see the data again, store or otherwise, what would be the best way to mount the drive in another system and copy virtual machines off of it?

  Welcome to the VMware community forums.  See if that helps - http://www.vm-help.com/esx/esx3i/no_persistent_storage_after_upgrade.php.