HP ENVY Notebook m7: question of sleep mode.

Similar Questions

• Satellite C665-p5010 - question deep sleep mode the installation of ethernet

  I get the question of deep sleep mode when installing ethernet in my laptop Toshiba C665.
  Even I tried plugging the cable Ethernet to the sound have not activated

  Pls help me in this situation.

  In Device Manager Ethernet to hidden state.

  Please can someone update on this issue...?

  What exactly do you mean by deep sleep mode?
  Which driver Ethernet have you installed?

  Ethernet could mean driver LAN or WLan.

• HP ENVY Notebook PC m6: biometric device problem

  After I've updated for Windows 10, if I leave my active biometric device, my mouse pointer/cursor continuous flickering as if to show the system is busy.

  I'm on the latest version of the driver for my hardware. Now, I am unable to use my fingerprint as my password.

  The only way I knew to prevent this was to turn off my biometric from the Device Manager.

  So I'm more able to make use of my material, even if its there on my laptop.

  Please help me.

  HP Simple pass seems to work, but the problem is that whenever the biometrics is selected, the mouse pointer continues to flicker.

  

  Hi @Ashkal052,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6 HP ENVY Notebook and questions with the Simplepass works not properly. I suggest you uninstall fingerprint driver or reinstall the version updated driver and HP SimplePass ultimate installed and reinstalled the latest version for Windows. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you.

  Please let me know how it goes.

  Thank you.

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• Question on Satellite C50 sleep mode - B - 14 d

  Hi guys,.

  I have problems with my laptop at the moment. Whenever I put it in mode 'sleep', he wakes back without warning. When I close the system, nothing happens, as if I never closed it. It's the same if I press the power button, but it goes to sleep for one second the vigils until a black screen.

  Can someone help me out here?

  Stand by. When you close the lid and your computer laptop go standby mode what happens exactly?
  I imagine that your laptop is in sleep mode and when you open the notebook lid should wake up as usual.

  Have you tested with hibernation mode? Is there a difference?

• Satellite C50D - A - 13N - Windows question sleep mode 8.1 alarm

  Hello

  I hope someone who knows more about than me power management can help!

  I bought a C50D-A-13N Satellite a few days ago and it was fine.
  However, I had a problem with the mode 'sleep' a couple of times.

  The laptop goes into mode 'sleep' as expected (when the lid is closed or when I press the power button). However, when I press the power button to turn it back on, it comes to life for a few seconds - the screen is on and I can move the mouse and interact with other things - but backwards past mode after a few seconds. All I can do to make it work is to close completely by holding down the power button and restarting, I REALLY hate to do.

  The laptop is fully charged and plugged or unplugged happy.

  Everyone knows about this problem in Windows 8.1 front?

  Thank you

  NTANGOUKANI

  On my laptop, I use the same settings but when I close the laptop lid goes into sleep mode. When I opened the laptop lid starts automatically without using the power button / stop.

  The same thing happens with your laptop?

• Cannot start by Satellite A10-S703 from sleep mode

  My boss gave me a Satellite A10-S703 running windows XP. I was tooling autour, when suddenly the computer is in sleep mode (LED flashes orange). I tried pressing the power button, but nothing happens. What should I do? I am seriously at the end of the roll and will be in hot water if I can't get the thing started. Help, please.

  Hello

  It of very strange that the laptop switches mode standby during the work on this.
  Anyway, you can try this way:
  Disconnect the power adapter and remove the battery from the laptop and wait several times. It's not easy to tell how long to wait but wait 10-15 minutes

  Replace the battery in the notebook, and then connect the power adapter. Try turning on the laptop computer.

  To my knowledge, this is a common procedure if such question comes on the laptop.

• End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

  When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

  I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

  Is there a question?

  Thank you for your collaboration.

  Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• How to disable sleep mode

  How can I disable mode 'sleep' in order to download a new large piece of software. The "sleep mode" begins after I leave the computer to download.

  Hello, this is a problem with the operating system - please refer to http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

• U3.0 dynadock not resumed after the laptop sleep mode

  Hi all

  I am confronted with the problem that my Dynadock U3.0 does not resume if I fashion "sleep" on my cell Samsun.

  It works very well at the start, it works when I take a full stop, and I just checked it in Hibernate mode and it seems to work fine too.

  Can anyone help me please with this problem.

  _Other factors: _
  I'm running it on a USB 3.0 connection.
  I have this USB connection should remain in charge mode 'sleep'.
  Windows 7
  64 bit
  dynadock model: PA3927A-1PRP

  The only way to get after that 'sleep' mode call is to pull the power cord out the dynadock, wait, then reinsert it.

  Any advice would be welcome.

  Thank you for your help

  Hello

  I think that it s not Dynadock question but with the USB ports on your computer/laptop.

  The sleep or Hibernate mode affects devices attached to the Dynadock and not directly the Dynadock. If the computer/laptop wakes up fashion 'sleep', the Dynadock should be recognized automatically. In the case where the device does not recognize the Dynadock, there must be something wrong with the computer.

  By the way: you said the Dynadock is connected to USB 3.0.
  I recommend to go to a USB 2.0 port and test it again.

  Last but not least: make sure Dynadock uses the latest display driver that you can download from this page: http://www.displaylink.com/support/downloads.php

• Satellite Pro L650 doesn't get often from sleep mode

  Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
  This laptop does not pick up often after mode "Eve".

  Can anyone offer suggestions on how to fix this?

  What's happening:
  When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
  After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

  Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

  Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

  A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
  Is it a driver problem or a hardware problem?
  If it is a driver problem, what drivers should I try to install?

  Thank you
  Graham

  Hello

  > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
  This means that this problem is not always, but sometimes only and it of not possible to replicate this.
  In this case is not easy to find a good solution for this

  > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
  > Is it a driver problem or a hardware problem?
  In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
  So maybe this is s question OS

  If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

• HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

  Hello

  Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

  Key points

  * Battery charge does that when the lid is closed (sleep mode). **

  * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

  * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

  * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

  I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

  Thank you

  Maggie

  Hi there @mdeely,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  When I enter the product number, I'll get the documents to your computer.

• Pavilion 14-V015TX: my HP Pavilion 14-VO15TX sleeves to the top when power off or sleep mode

  First of all, I upgraded from Windows 8.1 for Windows 10 months ago. This problem came up to the top, it will not wake up when I put it on the mode 'sleep'. I read a post here about it and followed the instructions of update of "Intel(r) HD Graphics Family' who got helped, but only for a while. Now, I am once again these strange things when I put my laptop on a sleep mode:

  1. when I put it on a sleep for more than an hour, it will not wake up.

  2. She warms up when it is the mode "Eve" and even when I stopped it (and this problem makes me more worried)

  Can someone help me as soon as possible please?

  Thank you very much!

  What is the version 9.0 or version 9.5? Because the linked page points to the version 9.5 for Win8.1 for your machine: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-14-Notebook-PC-series/5355001/model/5389795#Z7_3054ICK0KGTE30AQO5O3KA30R1

  And if it does not, then you have a problem serious because there is no HP Win10 driver for your machine.

• Satellite C660 and WXP - "sleep" mode does not work properly

  Hello friends,

  I've implemented WXP on C660, no '?' marks in DM, but when close notebook LCD black screen but it is still
  running. Then I can not put it this way 'sleep'. Only when I press the power button / stop for a long time it turns off.

  Please help me to have the correct sleep mode.

  >.. .but when I close laptop LCD...
  With other words, you use the standard Windows settings for mode stand-by, right?

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.