Cannot delete the previous Dungeon with TFP

Similar Questions

• Cannot delete the previous post-vm 10 network upgrade

  
  Hello

  Being execution vCenter 5.5.0 & ESXi 5.5.0 hosts, just upgraded a virtual machine to hardware version 10 and changed the network to a computer virtual port group / VLAN different, but he still remember previous Panel port / VLAN that is to say: a both.

  Tried to remove the NETWORK card with it on or off the power, but even in this case in the web client, it shows that it connected to port local VIRTUAL precedent/group/network.

  Hello

  I've seen this problem on the VMS with snapshots, are there for this virtual machine snapshots? If so, remove the snapshot and portgroup VM Rassie information should disappear.

  Arun-

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.

• My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  Fixes for Adware and pop-ups:

  1. Malwarebytes
  2. 2.11 DetectX
  3. Remove the adware that displays pop-up ads and graphics on your Mac
  4. T stop advertising windows pop-up and adware in Safari - Apple Suppor

  I had good results with GlimmerBlocker.

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.

• Cannot delete the file. 'trial' "impossible to find this element". It is neither located in C:\Users\master\desktop.

  I have a folder called test on my desk that I created to try the xcopy commands.  Anyone who has nothing to do with it.  I think that when I created the folder I could add a space somewhere in the file name.  He is currently empty that I deleted a word of her documents.

  However I can't remove it.   It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop.  Have already tried to delete the file in safe mode but not no luck.  Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files.  If I right click a properties to create the size is 0bytes and created a modification dates are suppressed.  How can I delete the file?

  
  

  '\\?\%userprofile%\desktop\trial*' of RD/s
  '\\?\%Public%\desktop\trial*' of RD/s
   
  Note the * appended to the name.
  --
  ..
  --
  "J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...
  > Ok, I tried both commands and came to the same thing.
  >
  > Other ideas please?
  >
   

• Cannot delete the registry key

  I use Vista as an administrator.  I would like to delete the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003.  I right-click and click on delete.  I wonder I want to permantently delete the key and subkeys, click Yes.  I get a message saying ' cannot delete the disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003: error while deleting key.»

  I'm with the right button and go to permissions.  I try to change the permissions for everyone and the OWNER RIGHTS to full control.  I get the message saying "cannot save changes to permissions on disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003.  Access is denied. »

  Should what step I take then to perform this deletion?  Thank you!!!

  Establish you as the owner of the key first, then give you all the permits "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• partition 'Windows cannot delete the active system partition on this disk.

  I created a partition of HARD drive in order to install a system in multiboot using XP and Vista, but I did mess up the BONES of the two. Now I want to do a clean install of Vista ONLY, but I don't know how to get rid of the partition! * Example: Computer management > disk management > right-click on the volume (M) > Delete Volume * but I get an error: "Windows cannot delete the active system partition on this disk" can someone help me to get my Vista to original?

  P.S. I have the "Microsoft Windows Vista Home Premium32 - bit Operating System Disk" provided with my computer when I bought it new. Thank you! -Jeff

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  Delete the existing Partitions during the process.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Extractdion failed, cannot delete the output file

  I have Windows Pro 8, 64-bit, 8G of RAM.

  When you try to install the drivers of HP, I get the following error.  Extraction failed, cannot delete the output file.  I get the same error using the download I used to use with Win 7 and a new download from the HP Web site.  I have also tried to run the program as an adminitratior and get the same error message.

  I managed to do the work.  I found on my C drive the location of the files when extracted and run the installation program from there.

• CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE

  Try to patch effect for Deskjet 722C for Windows 7.  Not able to replace the existing .dll files.  Error messages: could not open the output file, cannot delete the output file.

  Thank you for your response.  I found these solutions but still had problems.

  However, I was able to bypass Windows with a DOS command that did the trick.

  C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C6380 - cannot delete the document removed from the print queue.

  Photosmart C6380 - cannot delete the document removed from the print queue.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler , made service right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K