cannot enter the Sub - VI A * path planning

Similar Questions

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• Windows 95, saying that it cannot find the Source Word 95 path

  Cannot find the Source Word 95 path

  In what context you get this error, and what is the exact wording of the error message?

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Computer will not conduct the office and cannot enter the Bios.

  Original title: cannot get into the BIOS

  When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

  Hi Ivor,

  1. you receive messages or error codes when you try to start in normal mode?

  2. did you of recent changes on the system?

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

  You can view the following items to start in safe mode.

  Startup options (including safe mode)

  Start your computer in safe mode

  Hope this information is useful.

• HP G62: Cannot enter the BIOS menu, system will ask the admin password

  I just bought a HP G62.

  I add 4 GB DDR in order to get 8 GB total.

  When I try to enter the BIOS meny, prompted me the admin password.

  The seller told me he never entered a BIOS password.

  Could you please help?

  It was a keyboard problem.

  I found the solution here:

  http://dogber1.blogspot.fr/2009/05/table-of-reverse-engineered-BIOS.html

  The tool mentioned that the passphrase using a qwerty keyboard.

• ThinkPad 13 - cannot enter the UEFI BIOS without entering the W10 first

  I have a brand new 13 Thinkpad which I'm really pleased.  However, the user manual seems to be wrong.  I can't enter the UEFI BIOS in F1.

  It seems that the only way to get into the BIOS is first go to W10 and make a shift/reboot or a restart/F1.

  OK, suppose that at some point in the future I need to access the BIOS (ex: changing boot options) and is not a job W10 or perhaps corruption W10.)

  How to enter BIOS without first W10? BIOS maybe consulted independent of the operating system?

  Hello and welcome,

  It is by design.  "Shutdown" in Win 10 more resembles the hibernation and it is not safe change hardware/BIOS setup in this State.

  F1/F12/ENTER should be available after a boot failure or a forced shutdown via a long press on the power button.

  BTW, UPDATE/restart and restart should just do the same thing. SHIFT button should cause a real stop after a followed Fx market should work.

  Z.

• Laserje CP2025n: Cannot enter the secret menu on the printer HP Laserjet CP2025n range

  I need to replace making paper rolls in the printer. I found countless videos and instructions on how to enter the secret menu for ultimatly choose "Pickup rollers" option to block in place. The combination is by pressing the arrow to the LEFT and the red button to cancel at the same time which should then display "2ndary Service" option Menu.

  I'm doing something wrong? Is it because it's a CP2025n and not a CP2025?

  -Bill

  I thought about her from another Web site. IDK why but below has been what has worked.

  1. Hold the left arrow key)<). the="" display="" will="" continue="" to="" cycle="" through="" setup="">
  2. Press Cancel (x), then release the button left arrow)<). now="" an="" additional="" "2ndary="" service"="" menu="" will="" appear="" in="" the="">
  3. With "2ndary Service" showing (use arrows left/right, if necessary), press OK.

  So instead of building and now their whole (which is what most sites say) you must keep LEFT and hit CANCEL it once everything by letting go of the LEFT.

  Was able to access the menu 2ndary servce.

• Create the work around plan group, unless there is a clipping path, and then create the work around clipping path plan

  Hello again everyone.

  I was able to work on a lot of this code to other people's questions, but I hit a snag in my if/else clause structure... I need to make a plan to work around each groupItem of high-level layer [0]. This part is cake... unless there is a clipping mask. Visible limits do not work when there is a clipping mask. So, I built some of the loops that browse the pathItems search the clipping mask and return the visibleBounds said mask. However, I can't find how to structure the if clause in a way that will create the plan of work around the clipping mask when one exists.

  I am successful to find the visibleBounds of the mask and the creation of the appropriate graphic board, but it is ALSO to create a work plan around the visible boundaries of the entire group. How framing an if clause to determine if a work plan has been done around the clip path already and therefore not create a second work plan around the visible boundaries of the groupItem together? I guess I would need some sort of function to determine if createdArtboardAroundClip = true and if so, skip this group...

  Thank you all.

  Here is the code:

  var aB = docRef.artboards;
  var docLayers = docRef.layers;
  var layer1 = docLayers[0];
  var groupLevel1 = layer1.groupItems;
  
  for (a = 0; a < groupLevel1.length; a++){
      var groupLevel2 = groupLevel1[a].groupItems;
      var vB = groupLevel1[a].visibleBounds
      
      for (b = 0; b < groupLevel2.length; b++){
          var paths = groupLevel2[b].pathItems;
          
          for (c = 0; c < paths.length; c++){
              if (paths[c].clipping == true){
                  var clipBounds = paths[c].visibleBounds;
                  aB.add(clipBounds);
                  break;
                  }
              }
          }
      aB.add(vB);
      }
  

  Oh sorry, I forgot that one.  I was able to view the image basically to see what is happening.  Okay, so I saw a problem, you have one of your straps closure irrelevant.   Your first nested for loop does not close where you want.

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• Satellite C660-1tim: - cannot enter the BIOS due to the fast start feature

  Hello.
  I activated the quick start function that ignores the Logos and boots only from the HARD drive, but I can't enter or reset the Bios.

  I tried every combination of buttons, I can think.
  Power on + F2 does not work.
  F1, F10, F12, del, ESC, INS - all do not work

  Set BIOS to day 1, 50-win.
  Help, please.

  Hello

  To access the BIOS, you must turn on the unit first (press the power button) and immediately press the F2 key. You can press F2 repeatedly in the line to make sure that the button has been pressed.

  By the way: the Toshiba HWSetup is preinstalled on most Toshiba laptops.
  This utility provides the BIOS options and settings. So, you can change the boot order by using this tool also. You can find it in Toshiba Assist-> tab optimize

• Cannot enter the W530 UEFI Bios (same as T530?)

  It seems that I had the same problem that customers have with the T530.

  After removing the password from the bios, I have no chance to get into the BIOS.

  BIOS version: 1.11 (uefi enabled only)

  OS: Windows 8 (x 64)

  I tried:

  -Remove all drives (mSATA SSD, ODD, HARD drive)

  -Press F1 in the Lenovo screen

  -Tried all the options in the Windows Start menu

  -You press the Enter button to the Lenovo screen

  Unfortunately there is an update of the BIOS for the W530. So how I get into the BIOS?

  Solution: update the BIOS 2.06. That access to the BIOS is no longer a problem.

• Cannot enter the 53 online account

  Original title: account

  I can't enter my 53 account.it says that I need to activate cookies, never had a problem before he got so far. can get in with another pc, but now, not mine! SOS

  Contact Support for the HSA at the: (888) 350-5353.
   
  I would start here.

• Cannot enter the numbers on the screen of the phone - HELP

  Hello, I hope someone can help. I'm having a problem with enter numbers to be able to call on the phone screen. When I put a number in said unfortunately there have been contacts. I reset my phone and restarted.
  I hope someone can help
  Thanks in advance

  It's strange. You can check if the same thing happens in safe mode?

• Cannot, enter the BIOS with the F1 key.

  Hello

  I tried to install Mac OS X recently (10.7 Lion on Chameleon 2.1 RC1 16xx with iCloud patch), and the installer crashed. Now when I boot my ThinkPad I press ENTER to display the boot options. When I click on F1 or F12 ThinkPad not responding when I press enter or ESC, it will do what it must do.

  I've got "CMOS reset" error after restarting after the failure of the attempt to install Mac OS X. I know that sometimes, Mac is reset CMOS (I have a PC with Mac and it works well).

  I can boot Windows 7, but I can't the configuration of the BIOS.

  I had the supervisor password (I remember ), maybe that's the problem.

  djmati11,

  Sorry for my English.

  EDIT: I've got:

  ThinkPad Edge 13 (0217-2QG)
  Operating System: Windows 7 Home Premium
  i3-380UM(1.33GHz), 4 GB RAM, 320 GB 5400 RPM, LCD 13.3 in 1366 x 768 HD, graphics card Intel HD, Intel 802.11bgn wireless, Bluetooth, camera, 6 c Li-ion, Win7 Home Premium 64 1 Gb Ethernet, UltraNav

  @djmati11,.

  Try to hold the Fn then just press F1 and see if you can boot into the BIOS.

  JMT