Cannot find autobackup controlfiles even if we had Sunday full backup

Similar Questions

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• Error: The drive cannot find the sector requested: 0x8007001B) during execution of the backup on DVD

  I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:

  Upward did not complete successfully
  Original title: back to the top has not completely filled.

  An error has occurred. The following information can help you resolve the error:)

  The drive cannot find the sector requested:
  0x8007001B)

  I've looked everywhere for this problem... need help :)

  Babette

  Hello

  1. have you done any software or hardware changes on your computer before this problem?
  2. have you checked with another DVD drive?
  3. using the Windows backup feature to backup?
  4 do you have third-party backup programs installed on your computer?
   
  To work on the issue, refer to these methods.
   
  Method 1:
   
  Step 1:
   
  If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.
  
  Step 2:
   
  Temporarily disable the antivirus software and check if you are able to perform the backup.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
  
  Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
  Change when you save your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files
  Method 2:
   
  I suggest you check for errors of hard disk on the drive you want to back up.
   
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432
   
  NOTE: the steps also apply to Windows Vista
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  Hope the information is useful.

• Cannot find some files / even after the file display hidden files in Vista

  When I try to find normal files and files (i.e. temporary Internet files), they are not visible. I have set to display hidden files, the procedure takes one or two minutes and all the files in the folder - described example 2642. However, when the configuration is complete, I see only the same folders and files that I saw before you configure to see the hidden files and folders. How to solve this problem?

  * original title - access Impossible to the usual locations *.

  Temporary delete all files first, then reset IE:

  Reset Internet Explorer 8 settings

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

  This should he nail.

• OfficeJet Pro L7590 cannot find the printer in the basic facilities and full.

  The HP solution center software has stopped working recently with my Officejet Pro L7590. The printer is connected to a wired network.  I uninstalled the software, downloaded the latest software to install driver from HP.com.  The operating system is XP. I tried to install the base and full versions of the software several times, do a full uninstall/scrub every time.  No package can find the printer.  I ran the residential network Diagnostic tool and it can find the IP address of the printer very well.  I can access the web page to printer very well.  I've successfully installed the drivers of the company and I am now able to print.  I then tried to reinstall the full version, and it would still not find the printer.  Another pc on the network is the center of Solution HP software installed and communicates very well with the printer. I tried to disable firewall Eset Nod 32 during the install and no change.  I deleted all the entries in the registry I can find for HP, but still can not get the full version of the installation of the driver to see the printer.

  What else can I try to succesfully reinstall the driver package?

  Sorry, you gave the wrong way...

  First of all if you still have Enterprise installed download and important work!

  1. uninstall all other instances of 8.3 or previous.  My recommendation would be to uninstall all software printer hp through Windows Add/Remove Programs if nothing else to start with a base line.

  2. download the Utlities "HP Software Removal Utility - IT professional use only" (don't worry, this stand-a-alone also works on computers). File name: OLProL7X00_Scrubber_8.exe

  3. Once you unpack the latter you will have a new window and down there are 5 files, you must run one at a time in this order.  Uninstall.bat, Unistall_L1.bat, Unistall_L2.bat, Unistall_L3.bat, Unistall_L4.  Make sure that each of them is complete before you begin the following.  Some of them open and close Windows Installer UN and there is a gap of about 10-15 seconds.  Some of them require you to press any key to close the window on the finish.

  4 REBOOT

  5 download if you don't have not already ch from the Solution of Driver - company it, basic features of HP software/driver-IT Professional use only (again it is ok, you want your scanner, printer, monitor, and HP Solutions software to work once again don't you?).

  6 install the filename Business Solution: OJProL7X00_enu_Enterprise_7.exe if you uninstalled all this will install without a hitch, but you may need to input manually by selecting the IP method, enter the IP address of the printer. It's where he then found my network printer, and he continued the installation.  Mine found via the method of IP but not automatic.  Finish the installation and give your computer a few minutes to finish in the bottom.

  7 reset.

  8. If you have a program that uses a scanner TWAIN as Adobe Professional, CorelDraw, etc. test your scanner.  Mine works now.  Leave the test program,

  9 download new version 8.3 software, the full version of all the 311meg of it!

  10. install this software 8.3.  You can get an error (I did) just do not send the report, but the key is the continuous software to install.  What the problem is that the software company alreadly installed a files "hp? 5. ?? "and the cant on write.  The amount of the fine. Now when you get to the point where he asks how you connect your printer, USB or wired/wireless select Wired and click OK.  This will bring you to a new screen that is simular to the last, but to the bottom is a checkbox with "continue with the installation, I'll add the material later.  Put a check mark in the box and click Next.

  Surprise! the Setup will continue installing all recommended software and complete.  Still finished once that there is still things going on in the background! then give him a few minutes to complete!

  11 restart and give a little time and you will see that the screen is the network printer and all software programs now work.

  12. the only thing I don't understand is this: the old software used to create printer drivers 2, one for the printing of paper and other fax directly in applications.  The fax printer driver is no installation/configuration in this method, but I think that the Technical Support HP can guide you through this set up if necessary.  I'll do that tomorrow as it was something that I never thought or missed until it didn't work!

  I hope this helps! It did for me!

  Joe

• I can't find my photos or documents after making a full backup of the system.

  Ihad to create a set of rescue disks due to what I think is a type of malicious software. I could not 'start' my PC in any safe mode and had no choice other than to create records and reset to its factory settings. I did this, then loaded the backup of disks, but I can't find anything that was on them, like docs and photos... etc... What gives?

  I down loaded "Avira" an anti virus program and when I do a "full system scan" I see on the screen that they are being monitored, but I can't access them I can not find them... They are not on my shortcuts (desk top)... I am the only user and the Administarter, giving... I think I got the virus from the school, or a global game...

  Hello

  You can check the location of the files when you run the Virus can use Avira.

  Method 1:

  The problem may occur if the files are hidden.

  Check the following steps to display hidden files.

  (a) open the right clickink CD/DVD drive on the CD/DVD icon in Windows Explorer.

  (b) press the ALT key on the keyboard.

  (c) now in the menu bar, select Tools.

  (d) click on folder options.

  (e) select the second tab view

  (f) scroll and select Show hidden files, folders and drives.

  (g) click OK.

  Method 2:

  Download and run a full scan using the Microsoft Safety Scanner.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again

  See also:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• LaserJet 200 color M251MW: driver software cannot find printer wireless HP Laserjet 200

  I have printer HP Laserjet above 200. It's worked great for me and another person in my office. However, I've changed computers, and no matter what I do, the driver cannot find the printer. The other person in my office can always print very well, and my old computer can print always very well. I have disabled the firewall, turn off network security essentials (it is not yet installed antivirus software), provided the IP address, network address, the name of the device, let the software to set up my connection Wireless for HP Direct print. I restarted the printer, restarted my computer, restarted the router wireless, connected the printer directly to my computer via the supplied USB cable. It does not find the printer. I can ping to the IP address of the printer and get a quick response. I can print to other printers on network in the building, I just can't connect using HP. !

  None of that helped him. What is strange, is that when I plug the USB in, it feels immediately there is a printer is connected. It starts to install the software, asking me to acknowledge T & C before you get a read error "unable to create the folder to extract webpack". I am an administrator on this computer and the network, and he gave permission to run. However when I use the driver from HP, it cannot find the printer, even with connected USB? The HP print and scan doctor finds the printer immediately, on the network, but then try to install the same software that does not find the printer.

  I have finally however solve the problem, the key was to not install all other HP services, other than those needed to print. Deselection of all the software options (components 6-8) allowed him to immediately find the printer maybe 2 seconds, select these elements and not found the printer. HP needs to offer a thin driver that actually works, rather than trying to sell ink, just something that allows you to print would be useful. It's frustrating to spend 6 to 8 hours trying to configure a printer when the problem appears to be with the driver.

  For others with this problem, run the HP print scan doctor, download the driver again through this software, deselect all option provided with the driver software and continue.

• Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

  Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

  If you are unable to prove original owner Apple cannot help you.

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.

• I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  You try to install through the Explorer windows, not good... Try to install

  XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1

  boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove

  the partition, create one, let xp format & install auto. It is a clean installation, also, once she

  housing starts, do not touch any keys or mouce until xp asks for the product key #...

  You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• My computer crashed and I now need to reinstall Photoshop CS5 Extended. I have the serial number and I had to the suggested link but cannot find a Setup program.

  My computer crashed and I now need to reinstall Photoshop CS5 Extended. I have the serial number and I had to the suggested link but cannot find a Setup program.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• had a problem with mozilla firefox, uninstalled, tried to re = install and get an error "cannot find personal...". »

  I really want to give Fire Fox on my computer. Why can't I re - install.
  When reinstalling, it goes through all the windows, asking permission... and after that it says "completed" a window pops up saying cannot find personal identification information and the program does not start.

  Hi James,

  I've never heard of this problem before, can you post a screenshot to help us identify it? Just follow the instructions in this article How to make a screenshot of my problem?

  Also, what OS is the computer that you are trying to install Firefox on running (XP, Vista, 7, 8)?

• How to solve the error message "Mozilla cannot find runtime" when I try to start Firefox?

  Mozilla put Firefox updated to version 36.0. When I click on the Firefox icon to open it I get the message: "Mozilla cannot find runtime" I get the message even if I try to open Firefox by selecting "firefox.exe" in the Program Files folder. Subsequently, I uninstall Mozilla Firefox and reinstall. It will open and operate normally just after the re-installation. So if I close the program and try to re - open again, I get the error message same "Mozilla don't find runtime".

  The only way I can get Firefox to open is if I uninstall and reinstall everytime I want to open it after the initial re-setup.

  Adriel thanks for your quick response. Your solution worked perfectly. I was greedy, trying to find a viable solution to the problem "runtime" I had never met before. -_-