Cannot find mail connection doctor

Similar Questions

• Cannot find the connection to the printer on Satellite M40

  Silly question but I can't find the printer connection on my satellite M40? It seems to be a place for it on the left side of the laptop - there is a small sign of printer, but the actual take is covered-I should remove it? and how do I do it? Help!

  Hello

  As much as I know you can connect printer directly if you use the USB (newer printers). On the left side, there are three ports:
  -Port RGB (monitor)
  -A USB port and
  -PC Card slot

  I don't really understand where you found sign of printer there.

• Router R6250 map shows TV but Samsung TV cannot find wireless connection

  It worked up to one week, other devices work - TV searches wireless but can't find anything

  Hi @wfps6296,.

  The TV will be displayed only in the network map if she was able to connect to the network. If you try to scan for wireless network available on the TV and it does not detect anything then I recommend to contact TV manufacturer.

  Kind regards

  Dexter

  The community team

• How can I delete the Mail connection doctor accounts

  I have specific types of unwanted accounts listed in the physician Mail login screen.

  How can I remove them if Mail don't waste time looking for them when getting mail.

  Mac OS X 1.10.5

  Thank you

  You delete the mail, use the sign less below the list of accounts (no plus sign, this is for adding accounts)

• Satellite P300 - 20 H cannot find a wireless connection

  Hello

  Can someone help me? My Satellite P300 - 20H can not find the wireless router.
  He works very well before both at home and work, nothing has changed, but the laptop now cannot find a connection.

  Everything works fine when I connect the ethernet cable, but as soon as I unplug NOTHING.
  The router is in the same location as always, and no electric element in surplus is around.

  I guess it must be something to do with the laptop because it is the same at home because it's a job, WITHOUT JOY.

  Thank you

  Richy.

  Ohhm man.
  There are many discussions on the problems of WiFi and I hope you read some comments here that provide some tips.
  Did you?

  Firstly it should check if the WiFi is enabled correctly.
  Activate WLan switch (LED should be lit) and use the FN + F8 to activate the WLan.
  In addition, the WLan configuration should be checked! (SSID, encryption type, password encryption, etc.)

  Last but not least make sure your WLan driver is up-to-date.

• Access to Services of IOM using Jdeveloper: could not find a connection confi

  Hello experts,
  Try to access the services of IOM with IOM customer in jdeveloper and the code for the example class is shown below:
  package model;
  
  Import javax.security.auth.login.LoginException;
  
  Import oracle.iam.platform.OIMClient;
  java.util.Dictionary import;
  import java.util.Hashtable;
  
  
  public class Class1 {}
  public static OIMClient customer;
  private static String OIMUserName = "xelsysadm";
  private static String OIMPassword = "Oracle_7";
  private static String OIMURL = "t3://192.168.1.2:14000";
  private static String OIMInitialContextFactory = "weblogic.jndi.WLInitialContextFactory";
  
  public static loginWithCustomEnv() Sub throws {LoginException}
  Hashtable env = new Hashtable();
  env.put (OIMClient.JAVA_NAMING_FACTORY_INITIAL, OIMInitialContextFactory);
  env.put (OIMClient.JAVA_NAMING_PROVIDER_URL, OIMURL);
  client = new OIMClient (env);
  customer. Login (OIMUserName, OIMPassword);
  }
  
  Public Shared Sub main (String [] args) {}
  try {}
  loginWithCustomEnv();
  } catch (LoginException e) {}
  e.printStackTrace ();
  }
  }
  }
  
  
  and get the error message shows in compiling
  
  Exception in thread "main" java.lang.SecurityException: unable to find a connection configuration
  to com.sun.security.auth.login.ConfigFile. < init > (ConfigFile.java:93)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at java.lang.Class.newInstance0(Class.java:355)
  at java.lang.Class.newInstance(Class.java:308)
  to javax.security.auth.login.Configuration$ 3.run(Configuration.java:247)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.login.Configuration.getConfiguration(Configuration.java:242)
  to javax.security.auth.login.LoginContext$ 1.run(LoginContext.java:237)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.login.LoginContext.init(LoginContext.java:234)
  to javax.security.auth.login.LoginContext. < init > (LoginContext.java:403)
  at Thor.API.Security.LoginHandler.weblogicLoginHandler.login (weblogicLoginHandler.java:58)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:134)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:114)
  to the model. Class1.loginWithCustomEnv (Class1.Java:22)
  to the model. Class1.main (Class1.Java:27)
  Caused by: java.io.IOException: cannot find a connection configuration
  at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:250)
  to com.sun.security.auth.login.ConfigFile. < init > (ConfigFile.java:91)
  ... 18 more
  
  
  It is due to authwl.conf not found and I found that I need set the Java Options
  -DXL. HomeDir = PATH\OIM
  -Djava.Security.auth.login.config=FILE_PATH\conf\authwl.conf
  
  but am not able to find the location for the same thing in jdeveloper. Please provide details...
  
  
  Kind regards
  KK

  http://naive-amseth.blogspot.com/2010/11/OIM-error-javalangsecurityexception.html

  http://identityandaccessmanager.blogspot.com/2010/11/integrate-Eclipse-with-OIM-10G.html

• Equium - cannot find all networks to connect

  Not very computer savvy so will try to explain the problem as best I can.

  I can connect to my internet connection via ethernet cable, but cannot connect wireless (although I have before).

  The wireless function is enabled and the orange light comes on. When I open connectivity doctor and go on the radar screen, my internet connection appears (along with a few others)
  When I hover over the connection icon at the bottom of the screen, it says that "wireless connections are available", but when I click it it establishes that "windows cannot find any network" then understand that there must be an easy way to solve this problem, it can not find all networks to log, mine or one of my neighbors!

  Hi paulymart,

  Which model of laptop, you have exactly and that you've updated the driver WLAN?

• Get a "Cannot find driver" error when connecting to my HP Laserjet 4350 PCL5 for workgroup computer.

  * Original title: problem with HP Laserjet 4350 PCL5

  I have a shared network printer. But when connect us to another computer in the workgroup. It says that it cannot find the driver. Computer has Windows 7 64 bit. I tried my drivers and .inf files, but nothing works.

  Hello

  This problem may occur if the printer drivers are not installed properly.

  I suggest you run the HP print and Scan from following link doctor and see if that fixes the problem.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc

  You can try to install the last printing software, drivers from the following link and check if it helps.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=412171&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4063%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  For more information, see the links.

  Problem for HP LaserJet 4350 printers

  Share a printer

  Install a printer on a home network

  Keep us informed on the status of the issue.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• Safari cannot find server Outlook can ' t access my e-mail?

  Safari cannot find server Outlook can ' t access my e-mail?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• HP Officejet 5740: HP Officejet 5740 printer for laptop connection problem: "cannot find a printer".

  I'm trying to set up my new printer Officejet 5740 and I got to the stage where I need to connect the printer to a laptop computer or mobile device. I went to 123.hp.com and follow-up stages. My printer is correctly connected to the internet, but when I tried to connect it with my laptop via wifi, I got a screen that says "cannot find a printer". Before that, he asked me to put the IP address that appears in the settings of the printer wireless.

  I have a dual band wireless router, and it seems that my printer can connect only to the 2.4 GHz frequency range. My laptop can connect to the scales of 2.4 GHz or 5 GHz. I made sure that the laptop was connected to 2.4 GHz when I did this step. I even Redid the same process on my sister's laptop (she has 10 Windows), but I came across the same problem. In addition, the screen with the error message says what must I make sure that the firewall has not been in the way of the connection. I tried to disable the Windows Firewall, but I still have the same result.

  I am at a loss for what to do here. Any help would be greatly appreciated. I'm positive, I put the correct IP address, and I even tried to use the host name. Also, I know that my laptop and the printer are connected to the same wireless network. Everything I did for this step in the installation process has been with wifi (not ethernet, USB, etc.).

  Good news! I thought about it. I have all my wireless settings to reset to the default factory settings and that fixed the problem. Something about the State of the router must have been extinguished when I put in place the first time. Thank you for helping me!

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• Cannot open link in Windows Mail emails. Get the message saying "Windows cannot find...". (link)... »

  I use vista, windows mail and firefox as default browser.  When I click on a link in an e-mail message, I get a popup, Windows cannot find...  I know that the shortcut is good because I can copy and paste.  Any suggestions?

  Please check if your Internet Explorer default value...
  Start > default programs > Set Your Default programs > D'olonne on the left, click Internet Explorer. He said "this program has all its defaults"?
  If not, click on choose by default for this program > check on all the entries in the list > click Save

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Mail cannot receive or send after update-'cannot find server '.

  Original title: Windows Mail cannot receive or send after update

  Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An error code is displayed that says cannot find server. Please advise?

  Hello

  Faced with this problem only with Windows Mail?

  I suggest to go through the following points and check the settings in Windows mail.

  Troubleshoot problems with Windows Mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail