cannot find the host bar at the top of the screen

has obtained a new hard a drive can't seem to find the bar of the organizer who has used to be at the top of the screen, but is no more. not the bar gadgets that got him.

has obtained a new hard a drive can't seem to find the bar of the organizer who has used to be at the top of the screen, but is no more. not the bar gadgets that got him.

Reference Dell Dock:

http://www.DellDock.com/

If it is above > look in the start menu > programs > software Dell > Dell Dock > or re-download.

If another brand computer > look in their software > under start > programs.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

    When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

    1. What email program are you using?
    2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  • Signed .bar - cannot find the default application

    Hello

    a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

    I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

    "Cannot find the default application"


    I've already put my developer intro PlayBook (OS 2.1) mode.

    How to install the .bar file?

    Thank you.

    Vibes

    You need to side load the folder bar. A lot of discussion on that.

  • Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

    Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

    Hi Jfklinger,

    This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

    To resolve this problem, use one of the following methods to change the audio settings for a device.

    Method 1: use the order Volume of Windows

    To use the Volume of Windows command to change the audio settings for a device, follow these steps:

    1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
    2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
    3. click on the levels tab.
    4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

    Method 2: use Control Panel

    For control panel allows you to change the audio settings for a device, follow these steps:

    1. click on Start, click Control Panel, click hardware and soundand then click sound.
    2. click on the tab playback or recording .
    3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
    4. click on the levels tab.
    5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

    You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
    http://support.Microsoft.com/kb/930095

    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Reinstall Windows 8.1 point C7280 fails cannot find the file

    My computer kept saying that my printer is offline.  Then I uninstalled the driver and now I can not install the driver for my photosmart C7280 all-in-one printer on my computer running Windows 8.1.  I get the error message when installing the computer cannot find the file.   I download the driver several times, removing the previous download. What should I do?

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

    Now, try to reinstall the HP software and check if the installation goes as planned.

    If the problem persists, continue following the steps below:

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • EM12c: Cannot find the House discovered for plugin id:oracle.sysman.db

    Platform EM12c:
    Oracle Enterprise Linux 6.2 (x86_64)
    Oracle Enterprise Database 11.2.0.3 (x86_64)
    Enterprise Manager Cloud control Release 1 (12.1.0.1) 12 c (x86_64)
    --------------------------------------------------------------------------------------
    Problem:
    EM12c > objectives > databases > add
    Discovery of targets on the host: mcsdbora1.esri.com
    mcsdbora1. ESRI.com - cannot find the House discovered for plugin id:oracle.sysman.db
    --------------------------------------------------------------------------------------
    Notes:
    -Mcsdbora1.esri.com host is "Microsoft Windows x 64 (64-bit)"
    -EM12c is on Oracle Linux 6.2 (X86_64)
    -J' downloaded the latest version of the software Agent before adding the host
    "" EM12c > Setup > extensibility > Auto Update "before adding the host" "
    -Mcsdbora1.esri.com host is listed under "EM12c > objectives > Hosts".

    I found these articles in the support.oracle.com

    "How to manually add targets to the database in 12 c Cloud Control [ID 1371846.1]"

    "How to deploy the latest Plugin from database to the WHO and the Agent in 12 c Cloud Control [ID 1388143.1]"

    This last article, says updated the plug-in "Oracle Database". I checked and I do turn more later 12.1.0.1 connect.

    I wonder if I can only solve this bug, if I upgraded to Bundle 1 Patch (12.1.0.2) and install the 'Oracle' plug-in 12.1.0.2 database?

    Thank you

    Marcelo
    --------------------------------------------------------------------------------------

    BP1 is required for the management of the goals of Windows. So, you need to first upgrade your Linux WHO to BP1 and apply a few spots on the top before you can deploy plug-in on Windows machines. Support can provide you with the details.

  • Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

    Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

    Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

  • "Safari cannot find the server.

    I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

    Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

    Thank you.

    Hello

    Could be a cookie problem...

    In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

    Quit and then restart Safari to test.

  • I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

    I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

    This has happened

    Each time Firefox opened

    Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

  • XP - error: the system cannot find the specified file.

    I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

    Hello
     

    1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
    2. are you able to boot to the desktop now?

    Method 1.
    Run Disk Cleanup and disable the security software and t hen try the same installation and check.
    Want to t he article below for disk cleanup:
    http://support.Microsoft.com/kb/310312
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Method 2.
    If the problem still exists together own starting the computer and attempt to install the service pack.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
    Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • An installation support file could not be installed. The system cannot find the specified file

    I'm trying to get rid of some programs on my Windows xp, but the following alert continue to flock to the top: an installation support file could not be installed. The system cannot find the specified file

    Hello

    • What programs you try to uninstall?

    You can check this link:

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

  • Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

    Original title: problem with Windows XP error print spooler

    My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

    Hello

    1. What is the brand and the model number of this computer?

    This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

    To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

    You cannot add a printer and you receive Printer Spooler error messages in Windows XP
    http://support.Microsoft.com/kb/324757

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

    original title: automatic update does not work. Unable to load Windows 7 or SP2.

    XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

    Hello
     

    1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?
    2. you also try to install Windows 7?

    Method 1.
    Run Disk Cleanup and disable the security software and then try to install the same and check.
    See the article below for disk cleanup:
    http://support.Microsoft.com/kb/310312
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Method 2.
    If the problem still exists together own starting the computer and attempt to install the service pack.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
    Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
     
    Also, it is recommended to install the Windows XP service pack 3. Reference:
    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The MCSTRM service failed to start due to the following error: the system cannot find the specified file

    My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

    What can I do?  I have Vista SP2 64-bit.

    I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

    Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

    Thank you

    Candy C:\Users\David> net helpmsg 2

    The system cannot find the specified file.

    Is that error on this post code, IE something deleted, probably your antivirus or you.

    For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

     

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

     

    Close the browser and start a command prompt

    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

    Then to restart the Explorer after trying all of the following

    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
     

    If you cannot start the Explorer at all

    • Press Ctrl + Alt + Delete and choose Task Manager
    • Under the processes tab, click Show processes from all users to elevate to administrator
    • In the Task Manager, click the file menu and then click new task (run) and type cmd
    • Other things you can try typing

      Explorer
      Explorer c:\
      Explorer/e, c:\
      wercon
      control
      Iexplore
      Rstrui

    If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

     

    Reregister the shell registry entries

    It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll


    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll
    regsvr32 vbscript.dll
    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

     

    Delete the folder and the settings of the Menu

    This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

    Delete the thumbnail and icon Caches

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    attrib - r s h '% userprofile%\AppData\Local\*.db '.

    attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

    del "% userprofile%\AppData\Local\*.db".

    del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

    Disable thumbnails and previews

    Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

    If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

    Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

    If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

    Turn around after testing the Explorer.

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

     

    A boot is a way to explore

    It can be caused by a shell extension.

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close Windows Explorer
    • Start Autoruns by right-clicking and choose run as administrator
    • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
    • Go to the Explorer tab and uncheck everything to the left.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer

    If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see problems explore

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    Recycle Bin
     
    If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    RD C:\$RECYCLE. BIN/s/q
     
    then repeat for each drive to change the drive letter, for example
     
    d:\$recycle Rd. BIN/s/q
     
    e:\$recycle Rd. BIN/s/q
     
     
    If the Office does not start
     
    This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    MD "% userprofile%\DesktopTest".
     
    Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f
     
    MD "% public%\desktopTest".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f
     
    To restore default after having tested if begins to explore.
     
    Set ExpFix1 = % user
     
    Set ExpFix2 = % profile
     
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    Set ExpFix1 = % Pub
     
    Set ExpFix2 = % lic

     
    reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    You will need to disconnect then.
     
     
    New entry missing folder
     
    If the above does not help.
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
      

  • The system cannot find the specified file. (0 x 80070002)

    I am running Vista Home Premium.  We ran out of space on the external hard drive that we use backups, even if the backup disk is significantly bigger than the data we sort to the top.  My wife has removed the backup files to start again.  Now backup status and configuration indicates, "the backup was not completely successful... the system cannot find the file specified. '. (0 x 80070002) "How to fix this?

    Hi SamSmithey,

    I suggest you try the steps suggested by Vincenzo Di Russo, from the following link and check if this can help:

    Error message when Vista backup (0 x 80070002)

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: How to back up and restore the registry

  • Error: The drive cannot find the sector requested: 0x8007001B) during execution of the backup on DVD

    I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:

    Upward did not complete successfully
    Original title: back to the top has not completely filled.

    An error has occurred. The following information can help you resolve the error:)

    The drive cannot find the sector requested:
    0x8007001B)

    I've looked everywhere for this problem... need help :)

    Babette

    Hello

    1. have you done any software or hardware changes on your computer before this problem?
    2. have you checked with another DVD drive?
    3. using the Windows backup feature to backup?
    4 do you have third-party backup programs installed on your computer?
     
    To work on the issue, refer to these methods.
     
    Method 1:
     
    Step 1:
     
    If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.

    Step 2:
     
    Temporarily disable the antivirus software and check if you are able to perform the backup.

    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Back up and restore: frequently asked questions

    Set up or change automatic backup settings
    Method 2:
     
    I suggest you check for errors of hard disk on the drive you want to back up.
     
    Check your hard drive to find errors in Windows 7
    http://support.Microsoft.com/kb/2641432
     
    NOTE: the steps also apply to Windows Vista
     
    CHKDSK warning:
    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
     
    Hope the information is useful.

Maybe you are looking for