Cannot find the Illustrator after installation

Similar Questions

• blue screen (setup), saying: Setup cannot find the files temporary installation and press f3, it is that I get

  Original title: unerase my hard drive
  

  I had a work beautifully computer (Dell INSP 6000) until I decided to add Media Center to my Xp - sp3. I bought the drive from a seller on ebay with numbers of coa who did not work. The drive has been formatted by attempts of constant relocation. Using XP and Media Center disks, I can get as much blue screen (setup) saying that Setup cannot find the temporary installation files and press f3. It's that I get. I also have a blue screen telling me to insert the diskette labeled 'Windows Automated System Recovery disk' in on the floppy drive. That's all. I am doomed.

  E-mail address is removed from the privacy *.

  How to request backup discs Dell

• System cannot find the specified file (installation HPC4680)

  I tried to install the HP C4680 without result. I get the system cannot find the file specified error meessage. It is a brand new computer. Windows 8. I already followed instructions from another post on how to uninstall and I restarted the computer.

  Hello amywatsand welcome to the Forums of HP, I hope you enjoy your experience!

  I see your are your printer installation issues.  I would like to help.

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Cannot find the script of Installation of NOR-KAL check

  Hello

  I'm prompts to install the driver of Base of NIDAQmx. I got the following error: could not find the script of Installation of NOR-KAL check. Abandoned facility.

  Could you please help me with this.

  Thank you.

  ---

  C

  Hello Temp_Var,

  What version of DAQmx Base you trying to install? What operating system (including version number) you are trying to install DAQmx Base in?

  You can try to install NOR-KAL separately, following the instructions in the Readme of NOR-KAL. The latest version of NOR-KAL can be found here.

• Cannot find the Illustrator preferences file

  It's my first time on a forum - please bear with me. I recently moved to a new role with any new mac OS 10.9.1. I have not defined it manipulated our IT dept upward. I can't find the illustrator preferences file to reset my default preferences. I tried the rest of the string of records that are provided in the tutorial that I am following in the Adobe Classroom in A Book. Don't forget that I am far from the world of mac for 6 years. Do not assume that I know nothing.

  http://www.WikiHow.com/Show-hidden-files-and-folders-on-Mac-OS-X

• Backup complete pc cannot find the image after factory reset

  Don't know what forum this is because it is not quite fit any category.  Happy to have redirected it.

  Had some problems with my laptop, so I created a full backup in Vista Business pc.  Then I reset the phone to factory settings and tried to reinstall the saved image.  The Vista is OEM installed, so used F8.  The system can't find the image even if I select D drive and view the file.

  Thinking it's perhaps something to do with connections etc. that I had put in place a new instance, I created a new complete pc backup and it does not find this to be.

  I bought Acronis and copied the original image (which was also recorded on an external drive) then tried to reinstall on drive C.  He failed.

  Don't know what to do next.  Everything seems to be on the disks.  I read something about the load drivers.  Also something about the use of a virtual server.

  Don't know where to go from here.  It's been nearly three days.

  Nine Hills,

  Where you store your backup Image? On your D drive?

  You have access to a retail Vista installation disc? If Yes, you can run the System Recovery Options that allow you to do a complete PC Restore to outside the Vista desktop environment.

  If not, try the following steps:

  1. Click on Start-> in the field type to start searching the backup status and Configuration, click on enter.
  2. Click on restore files on the left, click Advanced Restore. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. Choose the files from a backup made on a different computer.
  4. Select the location of the backup you want to restore. (Can you locate your Image of restoration here?)
  5. Click Next, and follow the wizard to complete your restoration.

  This resolves who you know?

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Media Player cannot find the videos after renaming

  Media player was grateful and play videos (for the most part taken with flip and camera), but after the files have been renamed it does not find the files to read.  When I play them directly from the folders (my pictures/videos) he plays very well with media player, but I want them organized.  When I try to add files in media player don't notice "no compatible file available" is displayed.

  Hello jutori,

  Thank you for your response.

  To help address the issue, have been manually renamed files or is the update media information in Windows Media Player? This folder are renamed videos located in? Please also relay the exact error message that you receive when you try to play video files.

  You can also view the link below for more information on how to set Windows Media Player to automatically fix media information in your files.

  Information about the media in Windows Media Player: frequently asked questions

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP M175NW can't find the scanner after installation of new

  Hi all

  IM new to the forum. Hope someone can help me with a problem I am facing. I use an iMac 27 "2012 model. Recently, I did a clean install of Mavericks and since updated 10.9.2 up-to-date. I lived an isssue where I would like to print a document, and then the printer would be considered as offline... I could still access the right web page. The only way to get around it was to restart the printer...

  After a little research I have reset the system preferences print system and tried to reinstall the latest version of the software on the HP website. I got to the screen where I had to install a print queue... There was an alert on this page that said something about being taken in charge, but only for the hologram IP but I didn't really that much of a choice, because the printer is on an IP network...

  .. in any case, I set up printing queue under the Protocol LPD to Jetadmin taken but the scanner is no longer there.  This isn't to the utility capture image. The utility scan HP is installed but not visible there either.

  If anyone has encountered this before?

  Peter

  Hello

  Thank you for taking the time to answer. These are the same instructions that I took 3 or 4 times without success. I even tried to install the HP 10.8 software but had the same problem...

  I however found a solution to my problem after a few hours of troubleshooting... The solution was much simpler. Is it turns out that Apple has updated the HP drivers that appear as an update of the system after you install the software. Once you install the update, you delete the printer and add it again. When you do you now have the option to install it as a Hello printer versus an IP printer... Once you do this, you will have scanning capabilities.

  Hope that helps others out there

• Cannot use the printer after installation of the new computer

  I just installed a new computer with windows 7.  I have a HP photosmart 7960 printer.  Hung, but it will not recognize on the computer.  Said that the drivers are not installed.  HP Web site says that the drivers are installed with windows 7 and that I don't no need to install them manually.  I have 7 ultimate.  Does make a difference?  If not, then how do recognize the printer from the computer?  I installed the Device Manager, but it would not install the drivers, after I went through the wizard.  It asked me to register and pay $30.  I can't download the drivers without payin for them?  Thank you.

  All I had to do was restart my computer.  Works now.  Some jacka$ $ on Device Manager site wanted to charge me $39 and take control away from my computer.  He said it would take 2 hours to fix.  He also said that the printer was not compatible with windows 7.  Well, I printed of him this morning.

• Vista - cannot find the printers after installing KB2347290

  When I install Windows Vista (64 bit) updated KB2347290 nor my network HP LJ 1320 and HP Photosmart 6280 printers are the Vista computer. Printers normally work my 2 XP computers. If I uninstall Kb2347290 I can reuse the printers on Vista computers. I get 19 and 6161 error codes and performed procedures to restart the spooler and udate drivers printer, nor procedure worked. Any ideas?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The device Debug - cannot find the app after firing the debugger

  I develop for BB 9000 (bold), on the Eclipse platform. I have the eJDE 1.0.0.67 installed with the OS pack 4.6.0.19 and 9000 Simulator.

  Regular debugging works fine. The device is identified by the debugging options screen after connecting the usb cable. When you pull the debugger of the device, the camera screen whitens and displays the message "attach debugger". On the Eclipse console, I see that the device has been attached ("' attach: success '"), and I get the endless list of "no debug information is found for FOO". After that, the device display the clock again and nothing happoens. My App is not raised, and there is not anywhere on the device.

  The debugger however is attached, as I can see the list of threads running on the device, and I get all outputs from the regular camera journal.

  What I am doing wrong? How do I launch my application for debugging?

  the debugger does not start your application.

  If the OS on JDE and device versions do not match, you may not be able to use breakpoints.
  SYSOUT etc. is always available.

• cannot close the account after installation, an email account for a child, stopped when asked for credit card,

  Set up an email account for my grandson.  Was surprised when asked for a credit card to prove that I was an adult has closed the process when no other option.  Has decided to put the account in my name, but have to close it first.  Can't do it, because can not connect.   My granddaughter wants to use the same name she had with yahoo, and would therefore close the account now and not wait until it closes.   W close account yahoo, because because someone sends spam of her messages constantly, and this seemed like an easy solution.  This is the message I get:

  Work...

  @

  X

  Windows Live ID, advanced search

  Enter the words you want in your identity card, such as your personal interests.

  Search Windows Live ID options

  Work...

  ID available

  Click an option:

  Don't like these? Use the advanced search to Windows Live ID

  Or use your own email address

  E-mail address is removed from the privacy * is already a Windows Live ID. If it's your ID, you can use it to to connect.

  Work...

  Or get a Windows Live e-mail address

  Can anyone help?   Thank you... Catberg

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• I just bought Adobe CC and cannot launch the application after installation.

  I installed Photoshop etc and whenever I click on the app, it brings me to the Download Center.

  Thank you. I thought about it. It was sent to my app on Windows 8 tiles.

  Thanks for the reply.

  Sent from my iPhone

• Cannot find the printer

  Product) 1 name and number: photosmart Hp 5510, (2) installs operating system: Windows 7 64-bit, (3) error message: cannot find the printer {after you click on the option called NETWORK in the connection Option}.

  Please if I'm quick on the suggestions

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!