Cannot get 100 colorMFP LaserJet M175nw printer mode 'sleep'. the LCD stays on?

Similar Questions

• Cannot get LaserJet M175nw print in a network

  I just installed a new 100 Pro M175nw LaserJet printer on my network. However, I am unable to print over the network.

  • The printer is connected to an ethernet cable and configured with a static IP address on the network
  • I use a Windows 7 computer for printing
  • All of the internal functions of the printer work properly for example copy, reports
  • Printers when connected via USB to a computer

  When you use the printer over the network:

  • Digitization of works correctly
  • The integrated mangement of the printer web page works correctly
  • HP Print & Scan Doctor diagnostic tests give the configuration all green ticks
  • Print jobs stay in the queue until they change to an error state.
  • The printer does not recognize the print job at all - no progress message indicating the print on the console document
  • If the printer is in mode 'sleep' it doesn't wake up
  • Print test pages from the installer of HP, the Windows printer properties dialog box, Acrobat Reader and MS Word all fail.
  • All the symptoms remain the same when I turn off the Windows Firewall
  • An another HP LaserJet 2605dn printer on the network will print correctly on a different IP address, but also using the raw format on port 9100.
  • I removed all the drivers for other HP printers in case there was a conflict - no change after you have reinstalled the software.

  Can anyone suggest what I might have forgotten?  Thanks for your help.

  Problem solved.

  Critical steps seem to be:

  • I used the printer management web page (Networking / advanced) to "restore all network settings to their factory default values.
  • I then used the printer console to set the desired TCP/IP configuration - static IP, subnet mask, default gateway. No other changes.
  • The printer then worked correctly.
  • Later, I put the hostname and disabled all network services that I did not - like IPv6, Hello - and the printer continued to work properly.

  The configuration of end result is identical to what I had until I can see - but it works now.

  Thanks for your suggestions along the way.

• ColorMFP LaserJet M175nw 100: connect printer Laserjet 100 wireless

  Due to the recent DDOS acctack on servers DNS of Dyn Corp, it was recommended that all passwords and secret phrases on routers and Internet all devices be changed. I did this on all my devices and I'm successful with the exception of the 100 Laserjet Printer.  When you use the arrow keys on the printer to access the "network" Menu, I get a response indicating 'Access disabled Menu'.  I also have this same answer for the configuration of the system and Service.

  So I correctly uninstalled the printer and tried to reinstall it.  In doing so, I am only able to put in place as a USB printer and not a wireless printer.  Trying to set up as a printer wireless Configuration utility see the SSID of the router and then when he's in the Install utility installation fails.  I turned off and unplugged from the computer, printer and router and re-run the routine without success.

  In my view, if there is a way to set the default printer, it will disable the block on access to the "network" Menu on the control panel of the printer and then I would be able to configute the operation it's wireless.  I would also appreciate other possible solutions.  Thank you!

  Hello @burtech,

  Thank you for your participation in the Forums of HP Support! After reading your post, I see that you need to reset the printer. I want to help you with this issue today.

  I can provide reset for you in the product Monograph.
  In the forum next to our name to handle just click on the envelope
  to see it.

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Cannot get TV to computer (not supported mode). What can I do?

  COMPUTER CRASHED HAD TO REINSTALL THE OPERATING SYSTEM NOW MY TV DOES NOT WORK WITH YOUR COMPUTER AND TESTED SOUND DEVICE IS WORKING PROPERLY, TV SAYS MODE NOT SUPPORTED PLZ HELP

  original title: CANT GET TV TO WORK WITH COMPUTER (MODE NOT supported) which CAN DO? USE OF IT TO WORK

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest version of the graphics driver graphics card.

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

   

• LaserJet Pro 100 color MFP M175nw printing problem with Erorr with "Print queue was not accepted.

  MFP M175nw would not print no matter what MAC or HP labtop... it will show the test without problem page.

  Erorr log shows this:

  W [27/Mar / 2013:19:26:41-0400] HP_LaserJet_100_colorMFP_M175nw__0621F0_: printer takes in charge Create Job but not use of Send-Document.
  E [08/Apr / 2013:21:10:25-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:10:48-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:11-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:34-0400] [post 112] Print queue has not been accepted.

  Any expert know about this?

  I need to know more information about what is happening here to start. It seems that you are experiencing printing problems, but I can't get a lot of information that you presented. All the information show me is that the file could not be accepted by the print job. I'm going to need to know what it is that you print file type and size, the program you are printing the form, if you are still able to print other documents from other programs, how long it lasts and any other relevant information.

  Departure, we will perform the two resets in this video:

  http://www.YouTube.com/watch?v=31TbWMrTaFk

  Then, if you use a USB cable, make sure to remove (this is important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• Cannot connect Laser HP LaserJet 4240n printer to Windows 7. Error 0x0000007e

  Has anyone connected with success a Windows 7 to this printer? I see not all the drivers on hp.com for him and when I try a general universal driver I get
  Windows cannot caonnect to printer 'operation failed with error 0x0000007e.

  When I visited http://support.hp.com/ and seized 'Laserjet 4240' in the search field, the link to the drivers for Windows 7 is immediately apparent.  Here are the 32-bit drivers: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=457003&prodTypeId=18972&prodSeriesId=456989&swLang=8&taskId=135&swEnvOID=4062

  Here are the 64-bit drivers: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=457003&prodTypeId=18972&prodSeriesId=456989&swLang=8&taskId=135&swEnvOID=4063

• Cannot get on internet unless in safe mode on XP

  I have XP SP3 and all of a sudden, I'm not able to get all Web sites unless I'm in safe mode.  I ran Malware Bytes and tried running Avira, but I'm not allowed to update the database of Avira.  Malware Bytes picked up a certain number of things.  Also I am not able to run Windows Update in safe mode, so I can't check what is wrong.  I tried to fix the .net framework with no luck... .the dotnetfx.exe cannot run... any suggestions?

  I tried a lot of things with no results.

  I suggest check your network connection settings and see if it is correct or not. Also, open internet explorer, go to the connection, and the option internet tools and see if everything is OK, he.

  Also in normal mode go to internet option and in advance tab then reset IE.

  Also, try running:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

  I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
  The address was not included
  Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
  You may need to install additional software to open this address.

  The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

  Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

  Thank you in advance!

  In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

  • http://www.nexusmods.com/Skyrim/mods/modmanager/

  Problems with this program to third parties, please see the support forum:

  • http://forums.nexusmods.com/index.php?/forum/1413-NMM-code-development-chat

• Cannot get wireless to work on printer J6480

  Does not print to my HP Officejet J6480 new all-in-one wireless.

  I get a message printer is offline.

  With a cable USB is connected, it will print from my new IMAC.  I followed the instructions that came with the printer, but it does not work yet.

  I have the updated Imac in place on the airport.

  I have a wireless router for my dsl connection.  I need to print wireless not only my imac but also a gateway, a computer desktop computer dell laptop and a toshiba laptop.

  I used the HP Print Manager.

  I printed from the printer to the HP network configuration page and the the wireless network test report.  They all seem to be ok.

  Last thing, I tried to resistors in line several times, but he's never through

  Here's a video that shows you how through implementing the J6480 on a wireless network with a Mac.

  Very good video and I think it will help.

  Best regards / Jim B

• Cannot get my Lexmark 2200 Series printer to install. Tells me there is no driver found. How can I get a driver to install

  I have a new computor with windows 7 is installed

  Welcome to the Microsoft Answers site.

  Have you tried to go to the Lexmark site and see if it is has updated drivers for Windows 7 for your specific printer model?  In addition, if they do not have those for Win7, you can try to use the Vista drivers (not guaranteed).  Remember, if your printer is a former model, she has no drivers for the newer versions of Windows.

  Bob Larson Access MVP

• Cannot get pictures to load in guided mode

  When I choose a photo in the organizer and move it to the editor, the photo will appear not in guide mode.  Expert and quick mode, it is well, but in guided mode, it shows that before and after examples at the top.  The photo shows in the photo tray, but does not load at the upper area where changes are made.  What I am doing wrong?  It is easy in expert mode and quick... peak appears on the right and is ready for touch-ups.  Help!

  Philippe

  You must select one of the modes of editing by clicking left on either the before and after examples at the top.

  Then the image opens and the guided edit can be adjusted and applied.

  Best regards, Terry

• LaserJet P1102: printer connected to the macbook pro does not let me print double-sided

  I have a macbook pro and an hp laser jet p1102 printer. I checked the duplex printing option, and then the printer printed the first parts of the document, I wanted to print. Then a message appears - "manual Duplex: without changing the orientation, remove the paper from the output of the battery tray and insert into Tray 1 print side down. Do not discard the blank sheets. Then, press the button to go. " I re-inserted paper, but then what I do next as I don't know where this button is Go! Help, please

  Hi @insy,

  I have read your message and see that you are trying to print manual duplex and you get the message to press the Go button. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem. Do not take into account the operating system in the title. A solution for this problem is developing. Check the HP website for updates of software and firmware.

  HP LaserJet Pro P1102w printer - Macintosh: only manual duplex printing prints on one side in OS X Version 10.6 when it is connected to a wireless network.

  Good day! Thank you.

• Cannot get native resolution on hp pavillion dv9310us after the upgrade to Windows 8

  I just upgraded my computer hp laptop Pavilion dv9310us from Windows Vista to Windows 8. Worked well, except that Windows 8 has a 1024 x 768 screen resolution of the laptop.  There is no option to set it to any other screen resolutions. And the only display driver listed is "Microsoft base map.

  I tried all of the following characteristics, which none has contributed to this issue:

  -J' ran "Update device drivers" in the Device Manager.

  -J' installed all the updates of Windows 8.

  -J' downloaded the Nvidia 306.97-desktop-win8-win7-winvista-32bit-english-whql.exe (the pilot, that they said was more appropriate for this computer); He said that "the Nvidia Setup program cannot continue. This graphics driver cannot find compatible graphics hardware. »

  Any suggestions on how I can get Windows 8 to run on the native resolution of 1440 x 900 for this laptop?

  Thank you!

  Hello

  Your machine uses: NVIDIA GeForce Go 6150 (UMA) as mentined on its specifications:

  http://support.HP.com/us-en/document/c00875732

  It's a video card laptop, Nvidia 306.97 -Office-win8-win7-winvista-32bit-english-wh

  QL.exe will not work.

  The former Vista driver may work as mentioned in the following note:

  "Use 7zip to extract everything in the folder on the desktop.

  move the folder to E:\NVIDIA or elsewhere, you want.

  Type "Device Manager" in the Panel Office win8... go to graphics cards > right click and basic ms > update driver > choose from a list of drivers > have disk > select 'nvqh.inf' from the win64 folder in the folder that you created earlier.

  Work done... restart the computer... enjoy. »

  Kind regards.