Cannot get listener config page

Hello
I just installed 4.01 on EX 10 Oracle Apex I can open Apex, apex admin pages. But I can't open http://localhost: 8080/apex/listenerConfigure and also listenerAdmin, listenerStatus pages. I'm HTTP404 - the Web page could not be found. I start the listener using: java-jar C:\apex\ApexListener\apex.war it starts ok, open listenerConfig page last, but it is presented as a Web page cannot be found please suggest what could be the problem?

Hello

have you installed the Oracle XE on the same host that you try to run the listener on?
If this is the case, I guess you don't have to change or disable the HTTP Port used by the XDB HTTP server provided by the database. This is the default method of access to APEX called "Embedded PL/SQL Gateway' (EPG) in the installation guide for APEX.
If two (EPG and APEX Listener) services are configured to use the same port, only two services will be able to use it and the other is will not be accessible. In your case, probably of the database was launched before the listener, then it was already using the port and the listener could not bind to it.
The result you see is perfect - you reach your APEX installation via EPG.
To resolve the conflict, you can reconfigure the XDB HTTP Port or start your receiver of APEX on a different port. This last option is even easier. Simply enter

java -Dapex.port=nnnn -jar C:\apex\ApexListener\apex.war

where nnnn is the port to be used by the listener which should differ from 8080.

-Udo

Tags: Database

Similar Questions

  • Cannot get the home page of firefox on my computer

    I get the start page. I want to be my firefox home page

    This is the home page of mozilla firefox 3.6 version

    http://www.Google.com.my/Firefox?client=Firefox-a & rls = org.mozilla:-org.mozilla

    Simply go to options. And the link above as your homepage. Firefox 4 does not show this page. I have no idea why.

  • Get the blank Page using Weblogic and Apex listener v2

    Greetings,

    So I thought I would upgrade to the new version of the listener at the same time, I'm moving my current listeners of the apex (version 1.0.2.238.15.24) to a new server. The version of the new listener, I try to use is 2.0.0.354.17.05.

    I need to set up several headphones on the new server to point to different environments. I managed to successfully install the new listening port for one of my environments and everything works fine. However when I try to install the listener once I get a blank page when I try to put in place the Apex.

    I created two areas Weblogic (v 10.3.3), one for each listener. Here is how they are configured:

    This earphone works.
    DEV1
Domain Name:     APEXA
Host Name:     mars
Port Number     7023
Database Host:     mars
Database Name:     SID1
APEX Version:     4.1.0.00.32
    This listener DOES NOT work.
    DEV2
Domain Name:     APEXB
Host Name:     mars
Port Number     7053
Database Host:     venus
Database Name:     SID2
APEX Version:     4.1.0.00.32
    I am trying to access the second listener by entering this url:
    http://mars.xyz.com:7053/apex
    and that value is returned
    http://mars.xyz.com:7053/apex/f?p=4550:1:684042141256623
    Since the number of app, the page number, the session information is there, I guess that is what makes the database and is processed by the Apex. The problem is that the returned page is empty. The source of the actual page is:

    <html>
<head>
</head>
<body>
<pre></pre>
</body>
</html>
    I checked that images are accessible by entering:
    http://Mars.xyz.com:7053/i/apex_version.txt

    This is what is returned:
    Application Express Version: 4.1

    I don't know how to debug this problem. Any help would be appreciated.

    Thank you

    Larry

    You have configured different configuration for Auditors 2 directories? If only they would use the same config files and which would give conflicts.
    You can also configure the two summits on the same listening port, each accessible with a different URL prefix.
    And if the second database is always 10g, then you might hit a bug (Apex listener 2.0 does not work against 10g DB).

  • Have WIN 8.1 and running Internet explorer as web browser cannot get Thunderbird to be my e-mail by default Web pages, keeps wanting to use MAIL!

    Have WIN 8.1 and running Internet explorer as web browser cannot get Thunderbird to be my e-mail by default Web pages, keeps wanting to use MAIL!

    About the prior Toad Hall "Windows default" comment. That was really the key to the problem - windows by default does not work unless ALL the boxes on Thunderbird are checked. I had used TB along right but wanted to send a few photos and the default TB has not been recognized, though even I had used for a few months. Where discover the box the letters on TB has been verified not a made only of the disappearance of the problem. Tried the default Windows repeatedly route to nothing does not.

  • When I click on my mail to display in the box of Messenger all that get is a page that says Internet Explore cannot disply web page

    I can get on the window of windows live messenger.  I click on the top of the page good mail, it goes ok then bam!  the window that should be my Inbox has a picture of a world with a large red cross on it and the words Internet Explore cannot display the web page.  I tried via hotmail online, by my Messenger and can not get on my Inbox!  Help, please

    Thank you for visiting the Microsoft Answers site.

    The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

    http://explore.live.com/Windows-Live-Messenger-Help-Center

  • Gets the user cannot display the Web page when she tries to connect to hotmail.

    I try on another pc in which the user of that pc had its hotmail upward.  She took him out and tried to connect to his account and got the cannot display the Web page. She said she crossed and tried all of the suggestions that he gives.  I tried to use Internet Explorer and Firefox.  When the user is at home that she can get hotmail.  There is no settings on our firewall prevents the user to access hotmail.

    Hello, Tiffany Walker,.

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • Cannot get on internet, ebay or by e-mail. Get a message that says - Web page not available-. How can I fix th

    Cannot get on internet, ebay or by e-mail. I get the page that says - Web page not available-. How can I fix?

    Make sure that you are connected to your WiFi network and make sure that an internet connection could be established since the modem (the area where past the line cable or phone) and the router (the box that connects to the modem via ethernet).

  • When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    hyperlinks in emails in incredimail

    When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

    You must contact the Support of Incredimail for that matter.

  • Cannot get any browser to view a web page.

    Vista problem - dns related navigation

    I am running Vista on a laptop computer with connection mobile broadband and a standard dial-up connection. I connect directly to the internet and have no router or other devices on the network. I'm having a problem getting any browser to operate. IE 9 says that it cannot display the web page, and Chrome gives me a dns error message. I can ping to a numeric ip address, but I can't ping an address like www.google.com.

    What I tried:

    I ran two different anti-virus programs to check the virus. None have been found.

    I reset IE 9.

    Checked to see if the connection has been put in place in order to get the dns settings automatically and when this does not work, I tried to manually enter the IP addresses of known dns servers. It didn't work either so I went back to the automatic selection.

    I have disabled all programs to determine if there was a conflict from starting.

    I emptied the dns cache and reset winsock.

    I have reset TCP/IP according to the instructions I found on this site.

    I removed all anti-virus programs, thinking we could have a hidden firewall that was blocking me.

    None of this solves the problem. I ran ipconfig/all and there's ip address for dns servers.

    I'm puzzled. This problem occurred when I installed a program to dial for my dial-up service. I uninstalled the program, but that has not solved the problem. Another fact that may or may not be relevant, is that I also lost all my printing capabilities (no printer approved and it will not let me install a).

    Any help would be greatly appreciated because my computer is now almost useless.

    Edit: I use the same ISP of this post (on another computer) so I know that the problem is not at the isp. I would also add that Windows diagnostics are not useful. He just tells me to connect a LAN cable. I would also add that I can actually use Skype so I know that I connect to the internet ok. nslookup works.

    Hi WinVista007,
    have you tried a system restore?
    If you have a restore repointer forward this question comes up, I would say that that restoration. It causes makes it sound like some reg problems (but please don't use a reg cleaner)
    Let us know what happens
    B Eddie

  • I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

    Original title: new printer

    I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

    Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

    If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

    • Click on the ORB start and go into devices and printers.
    • Select (click) the icon of your Epson printer.
    • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
    • Click the "Drivers" tab on the print server properties dialog box.
    • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
    • In the context menu, select "Remove driver and driver package" and click OK
    • Click Yes, and then delete
    • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
    • Install the driver and the software using the file that you downloaded earlier

    At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

  • Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print.

    I recently downloaded Windows 8 and now cannot get my printer to print.  Tried to print a test page, message says "sent to the printer test page", but it does not print.  Can you help me?

    You have installed the drivers and software for your printer?  Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers?  If the answer is no, then you must do this before all first I try to print.

  • the construction of my portfolio on Muse site. Download my examples of banner ads that are SWF files, no problem. I need to download HTML5 banners I have done, but cannot get them on my page in Muse. Also, here the HTML5 banner ad to appear on a break, th

    Build my portfolio in Muse site. Download my examples of banner ads that are SWF files, no problem.

    I need to download HTML5 banners I have done, but cannot get them on my page in Muse.

    In addition, would be like HTML5 banner ad to appear in pause, then Viewer would click to watch it animate.

    Anyone know to solve it for it?

    Have you tried to insert via object > insert HTML?

    https://helpx.Adobe.com/Muse/topics/Embedding-HTML.html

    https://helpx.Adobe.com/Muse/using/adding-edge-animate-content.html

    Thank you

    Sanjit

  • Access Point WRT1900AC &amp; Firmware version: 1.1.10.167514, it cannot be accessed the config page.

    Hello!

    I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
    Firmware version: 1.1.10.167514
    Release date: June 30, 2015

    My WRT1900AC is configured as a wireless gateway.

    https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

    Also, I have disabled firewall and uPnP.
    A tutorial here:

    http://www.Linksys.com/us/support-article?articleNum=140371

    Everything works except that without access to the router config page.

    The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

    (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

    Yesterday, I spoke with live chat. I received recommendations:
    "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

    WRT1900AC will be his disabled DHCP. »

    I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
    Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

    fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
    Otherwise everything works well and stably.

    inspire wrote:

    Hi chadster766!

    Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
    If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

    IP address of the router (LAN):

    Connectivity-online-online details router LAN => Edit

    * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

    Bridge mode:
    Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

  • was on a website and now cannot accrss now because I get a web page saying in the Application Server error ' / '.

    In the Application Server error ' / '.

    I was on a website and now can't accrss now because I get a web page saying in the Application Server error ' / '.

    Hello

    1 have had any changes made to the computer before the show?

    2. which antivirus software do you use?

    3. what Internet Explorer that you are using?

    Method 1:

    Try to disable add-ons in Internet Explorer 9 and check if it helps.

    How to manage add-ons in Internet Explorer 9

    http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9

    Method 2:

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/no

    (Also applies to Internet Explorer 9)

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Hope this information is useful.

  • Cannot access the BEFSX41 router Config page Win 7

    Hi, I have a BEFSX41and am not able to access my router from any browser config page I have on my system. I use IE and FireFox and when I punch in the IP address for the router there is just there and about 30 seconds later, says that there is a mistake and that the connection has been reset. It is a 64-bit installation and I also have another computer that goes through the same router, is 32-bit and doesn't have this problem.

    I added a NEW driver for my Realtek NIC and it still happens. Another machine that I have on my network ALSO has a Realtek NIC but can still access the router config page.

    Someone at - it else here has the same problem?

    OK, problem solved. I used a different IP and the problem disappeared, thanks for the help.

Maybe you are looking for

  • iPhoto 11

    I have a Macbook Pro 13 ", which came with OS Snow Leopard. I recently updated to OS X El Capitan and noticed that iPhotos has been replaced by pictures. Initially, I had the version 8.1.2 iPhotos and need to update to iPhoto 11 in order to synchroni

  • How to remove "plastic umbrella" for good?

    I downloaded the umbrella plastic by accident and thought that I removed it twice He's back! How can I remove this for always?

  • battery percentage jumps to 100 percent during charging and falls to 'real' percentage when disconnected

    Hello I charge my new iphone 6s and I noticed that evertime I plugged my iphone on my macbook pro, as the battery percentage jumps to 100 percent. Then, when I unplug it, it jumps down to the 'real' percentage. IM currently draining the battery to ma

  • Table of current value (CVT) download newsletter

    Hey guys,. I have problems using the VIPM (not able to connect to LV). I tried a lot of things to be able to reuse VIPM (it worked before, maybe some windows update has changed anything). NOTE: I don't use windows firewall! The other firewall was not

  • LaserJet M402dn: Printing problems

    We have this printer on a network of simple workgroup, connected via a network cable and turn it on prints all of the PCs in initial swich of the printer ok.  After a time unaffected when you try to print again sometimes it fails and the only way to