Cannot get mmr_play etc. to work

Similar Questions

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Cannot get the sound to work on my hp mini computer

  I seems that I can't get the sound to work on my laptop. I ran several updates and also tried troubleshooting. can someone help me!

  Re-post with the following info: laptop, name and model number.

  Or if you, re - install your audio drivers (on the site of manufacturers of laptop or any CD you provided with the unit).

  See you soon,.

  Jerry

• Cannot get my speakers to work. they used to work when I am connected to my my helmet

  can't seem to get my speakers to work more on my computer. I can get sound through the computer's speakers, but not to insert. they use to work but I had my system cleaned and now they no longer work

  Hi BRENDAVENOR,

  ·         What happens when you try to play the external speaker?

  ·         You receive an error message?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Follow the provided article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Step 2: Update device drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot get the remote to work

  Hi guys,.

  I've just updated my Visa dv5 Pavilion to Windows 7, I can't now get the remote to work. I think it's a driver problem, Device Manager, says the driver works correctly, but I don't know if the driver is compatible with W7. I don't know where or how to get the appropriate driver.

  Any ideas?

  MORGs says:

  It is a Pavilion dv5 1110em running Windows 7 32 bit.

  Thank you!

  Here is Windows 7 32 - bit ENE CIR receiver driver you need for your remote control.

  Best regards

  ERICO

• Qosmio F750 - cannot get certain functions to work after 8 Win uprgade

  I have a Qosmio F750-125, PQF75E.

  Since I upgraded to Win 8, using Toshiba Upgrade Assistant I might add, I had a few problems.
  Especially not be able to get my Toshiba Blu - ray player to install.

  Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.
  The problem now is that the 3D feature do not always seem to work.
  When I open a 3D movie, I get only the image to view side by side, despite clicking 3D button.

  I tried to update the Nvidia driver (v290) to the latest version v314, available on the Nvidia for my graphics card, GeForce GT540M but whenever I get a message that the driver can not find hardware driver compatible. Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  However, 3D does not always work. I noticed that the face detection (SuperD Xtune) does not automatically start with the Blu - ray player when I start or open a 3D file to be read by the Toshiba Blu - ray player, it was.

  How can I get my Blu - ray player to replay my 3D correctly.
  If I open Xtune I am able to calibrate the 3D, and then it closes.
  I don't see an app under all the apps that seem to have something to do with the face detection function.
  Is there a setting that needs to be changed, an additional driver must be installed or what?
  I'm really disappointed with the support I received from Toshiba themselves on this issue.

  I also wanted to update the BIOS of my laptop.
  My bios version is 2 December 2011, but I noticed that a newer BIOS is available from the Web of Toshiba site dating back to February 2012, if I'm not mistaken.

  I downloaded but when I run it I get a message that my computer is not compatible.

  * Bleep *, it's frustrating.
  I want to recover my 3D feature and don't forget to run the most appropriate and most recent drivers at any time.

  > Above all not be able to get my Toshiba Blu - ray player to install.
  > Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.

  After the upgrade to win 8, you will need to contact the call center Agent for download of the Toshiba BlueRay player to win 8 valuation

  > Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  Cannot install the nVidia page graphics driver by running the exe.
  If you want to install a driver from nVidia page, you need a folder that contains the driver to the driver files, and then you can update the driver through Device Manager by using the Advanced installation procedure.

  > I downloaded but when I run it I get a message that my computer is not compatible.
  You will find on the page of the Toshiba UE driver BIOS v2.0
  The update of the BIOS requires value-added package that must be installed before trying to update the BIOS
  Also, the system driver Toshiba to win 8 must be installed.

  If you will not be able to update the BIOS Win 8 running, you should try updating the BIOS runs only pre-installed Toshiba system Win 7.

• Cannot get the unit to work in Windows 7 and Ubuntu 64-bit

  Running Windows 7 Professional 64 - bit Ubuntu 10.04.1 64-bit host as a guest.  After installing and upgrading everything (including VMWare tools) when I try to enter the unit I get the following error:

  The virtual machine cannot be set to Unity mode.  Check that the unit is supported for this guest operating system and the latest version of VMWare Tools is installed.

  This forum works on a Thinkpad T410S with turned on VT.  I also tried with Ubuntu 32-bit and the same problem occurs.  I have attached my vmware.log.  I also closed and restarted the host and the guest.

  Thank you.

  The authorization service is part of the process, although if this

  the service is not performed, a player will say that it is the cause. But to

  check, run "net start vmauthdservice" a high command

  fast and see if that gets the service runs.

  If services

  works OK and the connection is still blocked, so you

  disable, remove, or update any software is blocking.

• Cannot get my preloader to work

  Okay guys, I'm working on a new app for my iPhone using aswell AS 3 and I was doing my own preloader so that the user won't wait for the program without seeing load... so I made a loader bar, named: BarLoad and I don't you any error whatsoever, just that when I sync the app for the iPhone the bar does not load , just complete rest, and never play the thing, even when I play the computer, it does the same thing, and here is the code I wrote:

  Stop();

  addEventListener (Event.ENTER_FRAME, barLoading);

  function barLoading(e:Event):void

  {

  var total: Number = this.loaderInfo.bytesTotal;

  var loaded: number = this.loaderInfo.bytesLoaded;

  var percent: number = load/total;

  BarLoad.scaleX = percentage;

  trace (percentage);

  if(Percentage == total) {}

  removeEventListener (Event.ENTER_FRAME, barLoading);

  Play();

  }

  }

  Thanks for the help, I am kind with AS 3 again as you will probably notice.

  iOS (iPhone/iPod/iPad) cannot load a SWF file that contains the code. It is not yet generally advisable to try to load a SWF file at all unless you have a good reason. iOS simply does not support Flash at all. SWF is compiled down into ARM code and is therefore more SWF more. You have to stick to what the device supports.

  The screen is black is because you do not specify a splash screen image. You must create an image named "Default - Portrait.png" for the portrait and 'by default - Landscape.png' applications for landscape apps (or both for supported multi-orientation). Condition you this file with your iOS app when you export it. iOS automatically appear this picture at the launch of your application and will wait on this screen your application has finished loading.

  Usually people just use it as a loading screen. They put a nice picture to look the app with some texts like "loading, please wait...". »

  If you want to get more advanced you can always do as shown above. Outsource as much images, videos, audio files and content of all kinds (except SWF) you can import via the class leader of AIR. Then, you can view app loading.

• Satellite 1410 - cannot get the STRANGE new work

  Hi all

  I'm stuck getting Toshiba S1410 PS141E-07HKR-PL to work with Samsung SN-S082H-BABY-reader DVD - RW.

  Broken removed from the laptop drive was master/slave Toshiba SD-C2612. I know that Sn-S082H spec CSEL. I tried different firmware SB00, SB01, and SH00 SH01 - they can be csel = high and = low flavored, the numbers go as high as 3, so there may be 16 posible firmwares to check.
  Whenever I have change firmware I need to put the player in different notebook, so it does not work yet. Very tedious and dangerous. So.

  Is there a list any compatible weird for this laptop? Does anyone have experiences with this particular hardware configuration? On many forums I read messages that some firmware worked better then other none for me unfortunately.

  Cordially :)

  > Y at - it list any compatible weird for this laptop?
  Have you checked the user manual? Do please!
  On the first few pages, you will find some compatible sides, they are compatible with your laptop.

  I think that the reason why this drive does not work because it s are not in the user's manual and not every reader is compatible with all laptop, for example the assignment of pins.

  I hope I could help a bit if you n t have the user manual, you can download it on the Toshiba site. ;)

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• SBS 2011 - delete shadow copies directories and cannot get the backup to work

  Help, please...
  I just installed SBS 2011.
  When I saw the low disk space getting I profiled in the directory structure and noted that most of the space was taken by windows.oldxxx directories. So I deleted one.
  But it was a bad idea. Then I realized what I did and used the vssadmin console to delete shadow copies etc. and even disable the shadow and recreate them via the computer, shared management gui.

  But now, backups fail to complete... shadow copy operation failed with error Ox800423f0.
  In a bit of panic, I deleted the rest hoping he would rebuild itself... no luck.
  I don't really know what to do.

  Is there a way to start everything again.

  Please... Please, I'd really appreciate a solid direction.

  Thank you

  Hello cvcnow,

  I would suggest trying to perform a restore of the system, prior to installation of SBC 2011.  I do not know what operating system you use, but included some links for Vista and Windows 7.  If you are running Windows XP, please let us know what version and service pack.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• Cannot get the USB to work HP G6-2278dx

  My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)

  I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)

  I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.

  I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  and or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Cannot get my ALT + SILKSCREEN work

  original title: screen printing

  I done everything I'm supposed to and still not get my ALT + screen PRINTING to work. I can try

  (1) open the window you want to copy.

  2) press "Print screen" If you want to take a picture of your entire desktop. If you want a picture of the window you have open, and then press 'Alt + print screen.'

  (3) open the "Paint" application

  (4) choose 'change '.

  (5) select "Paste". This will paste your screen in paint.

  (6) save the image as a bitmap or jpeg image. JPEG produces smaller files and is one of the most desired formats.

• Pavilion g7-2118nr cannot get the wifi to work

  so I'm a 2118nr Pavilion g7 and I reinstalled windows 7 because I'm not a fan of Windows 8 what so ever. While I did the install, I was able to get all the drivers, but the wifi. I changed the default bios, that did not work. Haven't installed the wizard Hp no help either. I'm able to ride on the only threw ethernet but this is a laptop not a desktop computer, so it's not suitable for me if anyone can please help I would be very happy.

  Try this one...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123191_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken