Cannot get new devices to show the CPU, memory and Ping results

Similar Questions

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• Computer using only 50% of the CPU memory and 124%

  So when I'm doing intensive tasks (that's to say working in first and then simultaneously connecting clips to compositions of AE and work on them) seemed to me recently to hit massive roadblocks. So ive been editing a project for the last 2 weeks with silky ease. Render times were really low and I was doing enough after things heavy effects. Now all of a sudden in order to export a clip that took me like 1 or 2 mintues before takes like 10 minutes and my computer says that 124% of my cpu is used, and only 10 GB / 32 GB is used. When I RAM preview the same thing. How can I get my memory to be used at 100%? Why the body/AE is now tend to be so slow. Is there something wrong with the program or my PC? How can I optimize those programs so no foreign interference performance?

  Thanks and any help would be really appreciated.

  There is no way to AE or Premiere Pro use 100% of 100% of the time resources. No programs are built this way. You must ensure that you do not die of hunger for other applications of CPU power or memory. I saw so many screenshots of the AE memory settings where people thought they were doing a good thing when they drove their memory allocation in AE so they don't leave enough background apps to function effectively. Think in multiples of 4 GB of memory. If you are running an earlier version of AE, which allows you to assign a CPU to ensure that there is at least a pair assigned to other apps and that AE will use anyone who is left.

  Usually if you follow the recommendations of Adobe (Optimizing after effects of performance - Support Adobe) you will do quite well. Choose the good readers of storage, don't fill them past 80%, close all applications that are not necessary for your work and to organize your projects and the workflow in an effective way, then you're not made things twice or construction projects that would make in much less time if you made and replaced complex effects rather than rely on dynamic links or nested comps for all. You should also understand what kind of success your source footage is added to the project. Highly compressed source files (especially mpeg video) can easily take 3 or 4 times more time to decode as a format of good production. Stabilized warp clips must be rendered, clips that have temporal as mixing time, interpolation effects and other effects of time based will probably benefit PreRender before you apply other effects and make you save a lot of time in the long run. I can't give you a list, you need to know some things on your own and you need to know when the render time of 4 images per second is a good time rendering and when 5 minutes per image is also a good. As gain you experience, you will get a handle on it.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• My usb speakers work fine, but cannot get headphones to work in the front or rear of the analog plugs.

  It doesnot seem to even be able to recognize that they are pluged.

  Hello

  1. What is the brand and model of headphones?

  2. What is the operating system installed on your computer?

  3. the helmet normally works on another computer?

  4. are you able to use any other helmet on the computer in question?

  5. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  You can check if the headphones are activated as a playback device. Please follow the steps mentioned below:

  (a) right click on the "speaker" icon and select the playback devices.

  (b) on the reading tab, right click and select "Show hidden devices" and "Show disconnected devices" if they are available.

  (c) select headphones and turn it on.

  Method 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) click Start and click on Control Panel.

  (b) click on the sound.

  (c) in the new window click on the tab 'Read' and right-click in the window and click on "Show Disabled devices".

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click "set as default".

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• on my laptop of his fathers ' key stopped working and now he cannot get on his laptop because the password has a S in there.

  original title: laptop trouble

  Good so recently on my laptop of his fathers has ' key stopped working and now he cannot get on his laptop because the password has a S in there. He tried to clean the key to bored all possible ways, and nothing works. He wondered if he had a Ctrl function that would allow him to put a s with the key or bypass the password lock. Also, it has no access to a USB keybored.

  If the account in question was not the built-in account named Administrator, and then log on to that account and go to control panel > users to change the password.

  The password for the administrator built-in account is blank (no password).

  To connect to the built-in Administrator account:

  Reboot safe mode: press F8 immediately after power on.  The administrator account is displayed on the homescreen mode without failure.

• Automatically get new IP settings for the network adapter

  I have a home network with two computers Vista and I have a Vista laptop for work.  Where my work laptop is home it does not automatically connect to the internet, similarly if I want it.  When I go to network and sharing on laptop computer center it displays icons for the laptop, my home and internet network.  Threre is a X red between the network icon and the internet.  If I click on the red X a pop-up window indicates that Windows checks the problem.  Then a box will appear with several options, one if which is automatically "get new IP settings for the NIC 'Wireless Network Connection'.  When I click on a window pops up that says repair, and after a brief interval, she announced that the problem has been fixed, and it was fixed.

  How can I configure things so that she will do it automatically without this manual intervention.  There must be some way because I have never asked a password or permission to continue.

  If I turn off the laptop and then turn it back on a few moments later, the network connection is still there.  The problem occurs when I try again a few days later.

  Thank you.

  P.S. I tried to submit this a couple of days, but it does not appear under my son, so I don't know what happened.  If the previous post is without me being able to find I apologize.  I don't like having to type things, that's for sure. Jim

  Thanks for the reply.  I did it.

  I'm not sure it would fix the problem however, because the problem occurs after a day power off and power back up a few days later.  So presumably the power to the network adapter has been disable for power off intervals.

  Something happened tonight when I put under tension.  Asked me to confirm something on the network (unfortunately I can't remember what) and after that, I was connected to the internet - without having to go through the manual process described with my problem.  So maybe something has been reconfigured will correct the problem. Jim

• Cannot install iTunes. Get the error, "this installation package cannot be opened. Verify that the package exists and that you can access.

  I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
  http://support.Apple.com/kb/ht1925

  Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Turn on Windows 7 'Compatibility Mode' to iTunes:
  http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.html

  Windows reports that iTunesSetup.exe is not a valid Win32 program
  http://support.Apple.com/kb/TS1406

  First of all check if you have a version of 32 or 64-bit Windows:
  1) click the Start button, right-click computer and then click Properties.
  (2) in the system, see the system type - it will say either 32 or 64 bits.
  (3) download the appropriate version using the links.

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  Make sure that the "Windows Installer" service is running, or force start to begin.

  (1) open run, and type services.msc, and then press ENTER. You can also go
  Control Panel/Admin Tools/Services.

  (2) locate the Windows Installer in the list of installed services.

  (3) check that the status is "started".
  If the condition column is empty, right-click Windows Installer, and then select start.

  (4) If you get the error trying to force start the Windows Installer service,
  and then change the Startup Type to automatic (the default value is 'Manual').
  and then restart the computer.

  (5) very Installation Service runs after you restart the system.

  Also:
  Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.

  http://discussions.Apple.com/category.jspa?categoryID=150

  J W Stuart: http://www.pagestart.com

• External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

  External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

  Hello Sharan,

  These links may help:

  http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

  http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika

• I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  Thanks - Yes, it's the LR5.

  2 hours on the phone with Adobe technical support, it is fixed.

  I guess it was a mistake with the original installation.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.