Cannot Get Serial Port to operate in virtual XP Mode of Windows (operating system is Windows 7 Prof SP1)

Similar Questions

• Get a USB device is to identify the virtual XP mode on Windows 7

  I tried to get a device from logitech, G25 steering wheel, to be identified in virtual XP mode running windows 7. However the device does not appear on the screen of the top USB devices tab or in my computer. The unit works perfectly on windows 7. But I need it to be run under XP for a project. any help? Thank you very much

  Hi WorkingRightNow,

  As the device is not detected in virtual XP mode, I suggest you write the topic in TechNet forum to improve assistance: http://social.technet.microsoft.com/Forums/en-us/w7itprovirt/threads

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall (lost) Windows Virtual XP Mode in Windows 7 using the previous or your virtual hard disks?

  I recently had to reinstall Windows 7 Pro X 64 to address an obscure problem. In doing so, I lost my virtual XP Mode of Windows installation. But I still have the virtual hard drive related.

  1. Can I reinstall the VXP in order to use the old hard drive virtual?
  2. If I reinstall VXP using the VHD file, will be what I have already installed there would still be available?

  Hello

  I am happy to know that the problem has been resolved. Please do not hesitate to get back to us if the problem re occurs.

  Kapil Purohit - Microsoft Support

• HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  The printer works at all with this cable?

  The cable has recognized and installed by Windows XP when you logged on to the computer?

  If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

  You get an error message?  If so, please provide, without paraphrasing.

  This printer has already been installed on this computer?  If so, with what type of connection?

  And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

• How can I get a copy of my lost 'product key' for my Vista operating system?

  How can I get a copy of my lost 'product key' for my Vista operating system?

  How can I get a copy of my lost 'product key' for my Vista operating system?

  It is quite difficult to 'lose '.

  1. If you have a desktop computer, the product key is on the side or rear.

  2. If you have a portable computer, the product key is down.

  All else fails:
  13 free product key finder programs
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Belarc Advisor
  http://www.Belarc.com/free_download.html

• ESXi 4.0 on Dell 1850 this host doesn't support VT you have configured the virtual machine to use an operating system 64-bit client.

  Hello

  , I have in 3 data centers Dell 1850, identical hardware configurations.  I installed Esxi 4.0 to the ISO from site Web de VMware dell custom help. He is successfully installed on all servers, without error at all. I've updated them all to the last generation, using VMware vSphere Client. I have a problem with one of the server when I want to use 64-bit machines, he realizes: this host does not support VT you have configured the virtual machine to use an operating system 64-bit client.  However, this host is not able to run 64-bit virtual machines or virtual computer has 64-bit support disabled. For more information, see http://www.vmware.com/info?id=152. I don't understand why I got this, servers are identical, versions of BIOS, firmware, and all updates are the same. There is also a warning in the configuration tab, on the State of health link.

  Thanks in advance for any helpful suggestion.

  Yes according to the description of CPU, it seems that they do not support intel VT:

  http://Ark.Intel.com/product.aspx?ID=28016&processor=&spec-codes=SL7DX, SL7HH, SL7PF, SL7TD, SL8KQ

  Please give points for any helpful answer.

• 8430 PXI cannot open serial ports

  Hi all

  I have problems using the NI PXI-8430/8 map serial ports.

  After installing the driver, the device works very well and the troubleshooter MAX serial shows all 8 ports as adopted and I can access ports.

  After a restart of the system, I can not access the ports of 8430. This utility lists all the ports 'Impossible' with the message "cannot open port.

  In the Device Manager configuration seems correct. Also, I find no error in the Windows registry (COMDB,...). Everythings seems good enough.

  I think that theres might be no other application that could take control of all ports, especially not after a reboot.

  I tried to reinstall the drivers, reorganize the com-numbers and I have already changed the material 8430. Nothing solved the problem...

  Does anyone have a solution or any ideas?

  My configuration:

  Rack of 1078 / controller: PXI-8135 / Serial Ports: PXI-8430/8

  Windows XP

  I have another system that works pretty well in the same configuration.

  Hello

  I found the solution. It was a conflict situations with the MT7 3 m touch screen driver.

  Special thanks to french colleagues, their position causes an appeal me the right way.

  Here is the link: http://forums.ni.com/t5/Discussions-au-sujet-des-autres/Ports-COM-des-cartes-NI-bloqu%C3%A9s-par-le-...

  You must disable the service "Search MT7 Service series" (configuration/Administration/Services Board). After I did that it worked well...

• Cannot add serial port in MAX

  Hello

  I have a cRIO 9076 and you want to use the port series. I can see the cRIO able and Automation Explorer, but I'm unable to add a serial port. I get the error "Internal Error Max could not get interface to database of the MAX". A new installation does not solve the problem. Any ideas what could be the cause?

  Thanks in advance

  

  Thanks for your answers, even if they did not help. Already tried to resolve this question of the repair of a corrupted Max database before posting here, but he has not changed a thing. An other error message told me that maybe NI-VISA has not been installed on the controller, so I installed just that. What I didn't know, is that you will also install "server of NI-VISA. Could be obvious to more experienced LABView users but I'm new to this software and the large number of software components is a bit frustrating...

  Anyway, problem solved :-D

• Base address Get Serial Port (PXI-8420)

  I have an application that requires a control to a serial port at low altitude.

  I need to recover (pragmatic) address for the COMX, which is generally Beach 0xXXXX.

  The card is PXI-8420, 2 RS232 ports.

  Thank you

  German.

  If you use Windows, you can find this information in the Device Manager by looking at the tab resources in the property sheet for the device.  While it is not guaranteed to be that of boot at startup, it will be in practice, as long as you don't add or delete everything material, change the topological layout of material (from slot machines in things are or the provision of connections in a system MXI), upgrade/downgrade BIOS or apply a really unusual Windows patch.

  If YOU have the information by program (in this case it changes), it can be obtained by calling the method CM_Get_Next_Res_Des (documented in the SDK documentation of drivers Windows - Google for it) on the device.  The sequence of calls to find your device and get all the parameters to pass into this function is very hairy, but it is pretty well documented if you have time to comb it.

  If you use a LabVIEW RT, so unfortunately I don't think there's an API that exposes this information.

• Have a new 6 but cannot get it to sync with iTunes on my Mac. The two systems have system updates (and both confirm). How can I update iTunes on my phone when he said the latest version?

  Have a new 6s, but cannot get it to sync with iTunes on my Mac. Both systems have system updates (and confirm the latest version). How can I update iTunes on my phone when he said the latest version?

  The message to update iTunes refers to iTunes on your Mac - is your Mac on a high enough version of Mac OS X to support the required iTunes version? If this isn't the case, then your Mac can be changed?

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• Good afternoon__I have lost my installation CD. I have a correct key at the back of my PC. How can I get an another installation CD? ___I trying to reinstall my operating system. The PC is already formatted. ___Thank you in advance. __ANPW__

  Good afternoon

  I lost my installation CD. I have a correct key at the back of my PC. How can I get an another installation CD?

  I'm trying to reinstall my operating system.  The PC is already formatted.

  Thank you in advance.

  ANPW

  How to replace Microsoft software

  Carey Frisch

• How to get the options standby or hibernation in safe MODE? [Windows 7]

  I searched and sought, could not find anything either, but my thick head still think there may be an answer somewhere.

  He said that I couldn't not Audio on safe MODE, got it working very well after following a tutorial. I think that the same thing can be done with the SLEEP or hibernation, I could be wrong.

  Now, I still want to know how to get the SLEEP or HIBERNATE in safe MODE,
  I don't care if my attempts to spoil anything on this shit pathetic excuse of HP Compaq for a laptop. I don't want any other help other then getting options 1 or both. This laptop has built in fan (had 3 other fans do), so why I run safe MODE or it would melt faster.

  -Windows 7 Home Prem 64-bit.

  TLDR;  Anyway to get the sleep or Hibernate in safe MODE?

  Hello, Spencer,.

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Shawn "Cmdr" Keene [MVP] replied on May 28, 2014 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/sleep-in-safe-mode/d91b5ec4-8c45-4D6E-A899-eaba36209de0?DB=5

  Additional information:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Tecra M4: Cannot get com-port working on Advanced Port Replicator III

  Hi all

  I bought the advanced III PA3314E-1PRP port replicator but could not get work com-port.

  It does not get listed in my equipment manager.
  Anyone has an idea why not?

  Thank you very much in advance!

  See you soon

  Infinito

  I agree with Akuma
  (The name says it all) port replicator replicates the available ports on the laptop.
  If your laptop does not have this port, then you cannot use it with Port Replicator.

• Cannot get my Office jet 909b installed on my 8.1 windows pro8500A

  I need help to install my Office Jet Pro 8500 has 909b on my pc with windows 8.1 System.  Deleted inadvertently. The disc that came with the printer is not good with the 8.1 operating system. Clues please?

  Hello cowered.

  The HP Officejet Pro 8500 A909b disc load in Windows 8.1 computer, it would be very to dated. I think I found the download for the software, you must install the printer once more on your computer.

  Driver and complete software of HP Officejet Pro features

  I hope this has helped.

  Thank you