Cannot get Silverlight / Netflix to work on my Mac, it telling me that I need to upgrade
I have a mac. I got a pop-up that I needed to upgrade my computer with silverlight. I made and then tried to get into netflix streaming. I kept getting a notice to download silverlight. Then I kept getting a msg to upgrade. After this loop, I tried to fix it with a call and went to answers. Microsoft. I clicked on fix - it on the question about netflix, that he has sent me to an empty address bar.
Hello
(1) operating system do you use?
(2) have you made no changes before this problem?
(3) what internet browser do you use?
(4) have you installed windows in dual boot with Mac OS using boot camp?
In case you are using MAC OS, then you can contact the Apple Support
Tags: Windows
Similar Questions
-
When you are working in photoshop, a message telling me that I need to delete my "scratch disk" appears. What and how can I do this?
Hello
You should check with Support Adobe and their Forums.
Adobe support
http://www.Adobe.com/support/PhotoShop - Forums
http://forums.Adobe.com/community/PhotoshopI hope this helps.
-
How can I get my netflix to work on media center
I can't get my netflix to work on media center, I click on the netflix icon, and it says loading, then an error message pops up saying no internet connection / checking the connection. but I'm connected to the internet
Known issues and limitations of Netflix on Windows Media Center for Windows 7
-
you want to watch netflix on my tv but the sound telling me that I have to update how can I update my TV
How to upgrade sony TV
-
My Windows telling me that he needs 11 updates. These consistenly updates fail and the Microsoft fix did not work. Error codes are 641 and 80070641.
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Method 2
You can reset the Windows Update components.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 4
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
You can manually download and install updates from Microsoft Download Center.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Method 5
You can disable temporary of your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I get a foreign call telling me that I need to go to my computer because I have a problem with my windows operating system. They want me to go to eventvwr. I told them no and I do not trust to this call.
Now, I'm worried, why they call me. They call 4 = 5 times a day.
Help! I'm not good with IT
It is a scam. Tell them that put you your list of calls only. If you have a way to block their number, too. If they don't stop, report them to the Better Business Bureau.
Good luck.
-
When I try to get HP support assistance it won't let me and says that I need to change username, but I'm the user, very confused!
Hey Dorf,
To provide the proper resolution, I would need more information on your side.
1. How did you try to contact the HP Support?
2. What is the exact error message?
You can check the link for more information about how to contact HP technical support.
http://WWW8.HP.com/us/en/contact-HP/contact.html
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
-
I have Adobe Acrobat Pro XI. I want to form a federal Government Web site, and after clicking on the link, I get a message that my PDF reader isn't able to display this type of document and that I need to upgrade to the latest version of Adobe Reader for Windows. After you download the upgrade, I always get the same message. Please notify.
Hey askinst7,
Please save the form on your computer and then try to open it in Acrobat.
Let me know how it goes.
Kind regards
Ana Maria
-
Hi cannot get silverlight to install on my computer using windows vista 32 bit laptop
I tried to install silverlight for netflix cannot operate on top of the help system
Hello
1. what happens when you try to install Silverlight?
2. in the place where you install Silverlight?
You can install Silverlight from the link.
Download Microsoft Silverlight
http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx
If the problem exists, you can ask your question in the Silverlight forums.
Installation and configuration
http://forums.Silverlight.NET/13.aspx
See also:
Silverlight: Cannot install Silverlight or Silverlight gets installed but cannot play videos; Error: 1503
-
try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work
After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall. For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.
I have a copy of Windows XP Pro, installed in such a way that very well. Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc. I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet. Would have hoped that these devices are plug n play, but apparently not.
I used a Ubuntu LiveCD to connect to internet. So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.
Found the drivers on this site:
Those downloaded across the network. In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel. Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found. So I guess that's the Broadcomm one. This driver, installation actually installed. However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.
Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above. Windows indicated that the correct drivers were not found there.
I'm at one end. The material seems to work under linux, but cannot get the win to install the drivers. Advice or help appreciated.
Hello:
This is exactly what I need.
First install the Chipset driver and reboot:
Then, install the graphics driver;
Then, install the MS UAA HD Audio Bus driver:
Then, install the HECI driver:
Now for your pesky NIC... It's a NIC from Intel.
Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).
Paul
-
Satellite Pro P300-19 q - cannot get the Wlan to work
Hello
Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.
If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.
Thanks for your help, Zato.
Hello!
You have successfully updated the WLAN driver on the Toshiba site?
http://EU.computers.Toshiba-Europe.comTry to update the BIOS of your laptop. You will find on the Toshiba site.
You use the same standard WiFi on your laptop as on the router? Check in the properties.
Good bye
-
Cannot get the sound to work on my hp mini computer
I seems that I can't get the sound to work on my laptop. I ran several updates and also tried troubleshooting. can someone help me!
Re-post with the following info: laptop, name and model number.
Or if you, re - install your audio drivers (on the site of manufacturers of laptop or any CD you provided with the unit).
See you soon,.
Jerry
-
Cannot get my speakers to work. they used to work when I am connected to my my helmet
can't seem to get my speakers to work more on my computer. I can get sound through the computer's speakers, but not to insert. they use to work but I had my system cleaned and now they no longer work
Hi BRENDAVENOR,
· What happens when you try to play the external speaker?
· You receive an error message?
I suggest you try the steps mentioned below and check if it helps.
Step 1: Follow the provided article.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
Step 2: Update device drivers.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
Hi guys,.
I've just updated my Visa dv5 Pavilion to Windows 7, I can't now get the remote to work. I think it's a driver problem, Device Manager, says the driver works correctly, but I don't know if the driver is compatible with W7. I don't know where or how to get the appropriate driver.
Any ideas?
MORGs says:
It is a Pavilion dv5 1110em running Windows 7 32 bit.
Thank you!
Here is Windows 7 32 - bit ENE CIR receiver driver you need for your remote control.
Best regards
ERICO
-
Cannot get my microphone to work
Hello
I got the microphone job and then decides to move toward the rear of the front. Now I can't make it work is taken. The computer says that it's working but it does not take into account my voice. It is a very cheap microphone, but because it worked once I don't know what else to try to get it working again. I followed all of the suggestions online and still nothing. I am running Windows 8 on a hp Pavilion 500 PC. Control audio dts would have something to do with it?
Thanks for any help you can offer.
Thanks Marty, but does not work. I tried to turn the machine and turn it back on and clean up the registry as well as changes that you suggested. I also tried the feature implementation, but there is no sound recognition (does not record the volume meter). Any other suggestions?
If the microphone is not recognized and the default entry is correct, it is likely that the microphone failed. You can test this by taking in another computer and see if it works on another computer.
If you replace the microphone and the WSR, Windows speech recognition, is an important tool, spend the money to get a good USB microphone for speech recognition. I have no financial interest in this kind may recommend speech recognition solutions. Use the Contact us on their web site and speak to Jon or Tony for a recommendation.
Marty
Maybe you are looking for
-
Hello I use a unit of distributor of musashi with Rs232 for pressure controller and dosage times. I want to write the program in Labview for this. They UriPattern Protocol Default is 19200 bps. data length: 8 bit Start Bit: 1 Stop bit bits: 1 bit par
-
Display pictures in a folder by using the slide show
Is there a way to slow down the frequency of the pictures seen per minute? Or is it possible to change the number of seconds that a picture to appear when displaying photos in a folder in slide show view? Thanks in advance for the help
-
original title: darn childrenI I recently had to spend money to have a password reset and to establish myself as an administrator of the machine. I find I have been circumvented, however, and am now relegated to 'standard user', preventing parental
-
ADF against the REST business components to access data
HelloJDeveloper 12.2.1We are about to build a custom application of ADF that must run completely on the site.Given that we build it from scratch, we want to start with last 12.2.1There is also no specific use cases where another application has consu
-
Remove the file name characters when exporting to file
Hi allI worked with Silly-V , which has been extremely useful in creating a script to automate creating files in Illustrator.What I need help with now is the ability to add in this script, the ability to remove "x #" character of a filename on export