Cannot get the DMA2100 to complete the set up at the end

Similar Questions

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Cannot get the file to be imported.

  I tried the method of JoseIbarra - I did as suggested but cannot get the file to be imported in the services file. He never asked me if I wanted to add the information in the registry, so it is still on the office. Don't know what to do from here.

  Please stick to the initial conversation.

  Is this you speak of course (*first conversation*):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-do-i-get-print-spooler-back-into-my-Windows-XP/ed014329-1bd3-458d-9C93-bbb306fc731f

  You also made this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler/c4610093-a96f-4476-B263-eecf5b8fc339

  (but please do not reply to this one...)

  And this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/continuation-of-print-spooler-problem/0e885d7b-3e64-42ee-A248-9d9f2a8e26c5

  (Even once - keep the * first conversation * going.)  Written on it.  Show how this conversation continues spreading around.)

  BTW - my suggestion has not changed.  I still think that you get just around issues that still exist, probably, by fixing the little things you need at a given time.

  Backup important files/folders (for you) (including documents, photos, music, Favorites, Internet favorites, files installable application, serial numbers, product keys, spreadsheets, you saved to the desktop email, etc.) and wipe the disc completely - I'd even a zero writing on the disc (formatting) before installing the operating system from the original installation media.  Then install your applications and restore your files.

  As to what they were asked to do... Always seems that you saved the file as a *. TXT file and not a *. REG or there is much more wrong with your machine (see my suggestion above.)

  Visit this web page to look at the photo on the left (a first) to see the screenshot of the possible is the desktop icons and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

  To check if you saved incorrectly or if there is something wrong with your system (or two) - right click on the file you saved and choose 'Properties' from the menu you get.  Under the 'Général' tab, she said, "file Type: registration entries (.reg)" and "opens with: Registry Editor" or something similar?  Visit this web page to look at the picture on the right (second) to see the screenshot of the possible look at the windows of the property and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• Windows 2008 R2 as a guest cannot get the IP address of the server (VMware workstation 7.1.3 on Windows 7) professional

  Hi gurus,

  I installed VMware workstation 7.1.3 on my Windows 7 laptop professional x64bit and I can run my old VM (XP) without any problems in this regard. And I tried to install a new client (Windows 2008 R2 Standard x 64) on this subject, when I put the NETWORK card in the deck, he cannot get the IP address from my DHCP, always show me error "Windows has detected an IP address conflict...". ", I tried the IP static installation for her also, same result.

  I tried to install a new windows Server 2003 as a guest (also defined as a network bridge), it works very well, can get the IP address from my DHCP or can set a static IP address with no problems. Does anyone have a similar experience on this combination? Any solution to this issue?

  Best regards

  BUGBUG

  I recently managed to get bridge network work with a Windows Server 2003 R2 SP2 guest in VMW Workstation 7.1.4.385536 on a host Windows 7 SP1 Ultimate.

  VirtualBox 4.0.4.70112 is installed on the host and disabling the 'VMware Bridge Protocol' in the 'VirtualBox in Ethernet Adapter"on the host was necessary.

  Outpost Firewall Pro 7.1.0.3415.520.1247 is also installed on the host computer and I used some information from the link below to add some necessary firewall rules.

  http://www.agnitum.com/support/KB/article.php?id=1000061

• Cannot get the password or re-establish the link. What should I do?

  Cannot get the password or re-establish the link. What should I do? Reset email is never sent. This master password"... How do you define? I'm locked out of Thunderbird. Help

  Maybe he's trying reset Pasword Thunderbird Master as I'm doing? I copy the code and paset in the console tools\error and press Evaluate. I wonder if I want to reset the Master PW and I say yes, then I get a saying that the Master PW has been reset. Maybe he's looking for an e-mail to tell him that the IPL has been rest to? But the problem is, nothing happens when the password has been reset, msg is sent. TB continues to request the password. I have not changed my PW and when I enter the good PW, TB does not recognize. And reset the PW Master does nothing but generate Pop up messages. It's very frustrating. The information in the help files are not accurate, or the code provided does not work although it generates messages indicating that the IPL has been reset.

• Apple TV 4th generation-cannot get the Facetime in fashion landscape on my Samung TV

  Apple TV 4th gen TV OS 9.1

  When I do Facetime since my phone / Ipad and started airplay on my Samsung TV I cannot get the Facetime in landscape mode or mode full screen when I Flip horizontally Facetime.

  Only it shows vertical - left and right of the screen I see black spots. Is this a bug in the software?

  If you do not enable airplay after that you started to facetime and it runs in landscape mode?

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• Cannot get the "< FEFF >" string in the selected text [indesign CS6]

  Hello world!

  I can't get the string to the selected text. The selected text contains several xml tags.

  In adobe indesign cc version of 2014, the selected text is bring the string «< FEFF >» tags

  In indesign adobe cs6 version cannot get the string "< FEFF >. they do ""-empty space.

  

  Are the above-selected text contains several xml tags.

  but I get content using script code can't get the string.

  

  the script gives the result, xml tags are converted to "". ""  I expect "< FEFF >.

  I expect the output is: "< FEFF > Applescript < FEFF > < FEFF > selected text < FEFF > < FEFF > < FEFF >."

  Please help me...

  Thank you

  John Peter.

  the script gives the result, xml tags are converted to "". ""  I expect to ''.

  The xml tags are not converted to "" but "\uFEFF" (zero-width space non-bec), it is the character used to represent the tags in a text frame. Looks like the apple script converts a hexadecimal representation unicode values.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• Cannot get the value of the selection of OAMessageChoiceBean

  Hello
  
  Of our 11i to R12 upgrade, in the customer's advanced search page, we are unable to get the handle suitable for OAMessageChoiceBean (in extendedCO).
  
  The snippet for the bean handling is as follows:
  
  OAMessageChoiceBean PartyStatusFilter = (OAMessageChoiceBean) vOAPageContext.getRootWebBean () .findChildRecursive ("xxfeF426PartySearchStatus");
  String xxTest = PartyStatusFilter.getSelectionValue (vOAPageContext);
  
  The value of the above xxTest (in R12 approx.) is coming with a null value. Considering that the same code works in 11i environment and the xxTest output = "A".
  
  So we cannot get the value of the selection of the messagechoicebean in our environment of R12. I already looked in previous similar positions in this forum, also tried to use getSelectionText (vOAPageContext) or getSelectedValue(), however, it did not work.
  
  Pointers please?
  
  Thank you very much
  Zahid

  Hi Zahid,

  Try with this ID = HzPuiPartyStatus

  -Had

• Cannot get the email set up properly

  I have a Palm TX and I have a pop server for my e-mail address. I went into my Outlook and set my parameters exactly as they are there. I get an authentication error. I have read all the posts and exceeded the inst manual a ton of times. I went into advanced settings and tried every combo verification SSL and APOP, or even if they are not selected in my Outlook settings (I read that on a post somewhere)

  PG 1 of set up, I intend to name - is not matter what I put there, Mail Server - Other (my small local telephone city Co. Server), Protocol POPs.

  PG. 2 I put my full e-mail address, including the mei.net to end here and my password (which I returned 4 times now)

  PG 3 new full E-mail address with mei.net in the end, Incoming - same as my outlook - mail.mei .net, Outgoing - smtp.mei .net.

  Advanced port or PG. 4 # are the same as my outlook and no boxes checked because my outlook settings don't have any of these not verified, however I tried to check these boxes in each combo just to see if it has changed what. I don't know there must be a simple little thing miss me, I hope. Can someone help me?

  Thank you

  Triedtrue

  Hello and welcome to the Community Forums of Palm.

  Check your user name (second screen of the installation).  This should not be your full e-mail address, just the part before the @mei.net.  With all e-mail accounts, that I put in place successfully with different providers (aol, comcast, verizon), this has been the case.

  Message edited by smkranz on 04/21/2009 14:13

• Newly installed hard drive, cannot get the reinstallation of Windows 7 to the end

  Hi all. My factory-issued Seagate 1 TB hard drive of origin provided with my PC Pavilion Elite HPE-240f failed a few months ago and I finally had time to fixation (rock a Pavilion dm4 laptop in the meantime, I'm not in a huge rush). I replaced it tonight with a Western Digital Blue 1 TB hard drive, which I know is Advanced Format.

  I love HP platform minor changes in the the Windows 7 OS, I went ahead and tried to reinstall the OS of my recovery disks that I made when I got this PC. I checked the BIOS settings and the new hard drive WD IS recognized, the size is correct, etc. It has been configured in RAID with the SATA controller, and I tried to put out when the installation of the operating system initially lacked AHCI. It seems to be stuck in some kind of loop in the final configuration step, and I get out of the dialog box "Installation of Windows set up Windows to run on a hardware on this computer" could not. Hit Okay sends in reboot and after that I get a "Windows is unable to complete the installation. To install Windows on this computer, restart the installation"notice.

  It makes me batty, and I really want my back office. This is a great machine, and as much as I love my laptop, it can't handle heavy programs like Photoshop or my multitasking fool. I managed to get the OS installed by forcing the system to bypass its system predefined through registry commands, but the important things were wrong, as Windows Update does not work, so I'll try to reset all with only recovery disks. So far, no go. I am extremely tired, frustrated, and it's late, so apologies for what I've left out or of typos. Any help on how to solve this problem is GREATLY appreciated.

  Thank you very much for your response, @MechPilot. I actually found what I thought, it's perhaps the question a day or two before your answer: my computer was manufactured and purchased just before October 2010, which has been cut for restoration placed disks shaped for the drives non - Advanced Format. All the following which has been reformatted accordingly. I contacted HP and bought the replacement of the recovery discs (made in 2012), that I received yesterday. After several hours of nerves and finger-crossing, it worked like a charm. The operating system has successfully recovered, and I couldn't be happier!

  I answer computer said of office right now, in fact! Thanks again.