Cannot go beyond the login screen

Similar Questions

• New SSD - cannot go beyond the login screen.

  New SSD put in place successfully in the MacBook Pro (mid 2010) 10.6.8 OS. Cloned SSD as boot drive, but do not yet installed inside the case.  I used this drive with success for a few days.

  Then yesterday with finals and Firefox running, Firefox has suddenly closed and MBP had only limited functionality.  I tried to reopen Firefox, but the error message said it was already open.  I tried to open 'Force Close' to see if this was true and maybe close it there before to continue, but when I click on the Apple, I got a blue screen, then my normal screen, with icons to come 10 seconds later.  After trying many other things, I had to make a difficult stop (by holding down the power button).

  I rebooted, entered my password at sign-in, but then, instead of proceeding to my normal screen with background, icons, etc, I'm a blue screen which finally rolled back to my login screen.  Then, I entered my password (it IS correct) and the same process happened (repeated 10 times just to be complete).

  I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

  Don't know what to do now.

  keysguy9 wrote:

  I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

  Don't know what to do now.

  TRIM will not solve your problem.

  With Snow Leopard, you may need to reinstall the version of this OS supplied with your system; then update 10.6.8. Reinstalling the operating system will not damage your data or applications. But, you must back up your data, if you can, on your external SSD before reinstall OS X.

• Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

  I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some people told me that it is the other HDD VGA. What do you think?

  Hello

  For me, it certainly looks like the graphics card failure!
  It's really bad, because for the most part to the whole motherboard must be replaced! :(
  But to be 100% sure the diagnostic test is necessary.

  I think you should contact the ASP in your country. Guys to explain the situation and ask for clarification.

  Maybe your warranty is valid? In this case all replacements would be FRO free!
  Usually the guarantee must be valid for 24 months if you have saved this notebook on the Toshiba page.

  concerning

• Cannot focus Skype name and password in the login screen

  I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in Internet Explorer 11. Does anyone know a solution to this problem? I use Windows 7 Professional.

  For me, that did the trick.
  http://community.Skype.com/T5/Windows-desktop-client/Skype-won-t-sign-in-can-t-enter-password/m-p/41...

• How to you turn off the user invited on the login screen?

  How do disable you the guest user account on the login screen?

  Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

  Summary:

  • MacBook 2016
  • El Capitan 10.11.6
  • FileVault is enabled
  • Find my Mac is disabled
  • Comments User in users and groups is set to Off

  Tried the following from another forum:

  1. make sure that 'find my Mac' and guest user are disabled, restart;

  2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

  3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

  4. If not, only 4.4 and 4.7;

  4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.2 go in "utilities > Terminal" and run the command: csrutil disable.

  4.3 restart;

  4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

  4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

  4.7 reboot and it's fixed!

  4.8 re activate 'Find my Mac' as you wish.

  • FileVault is enabled

  You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

• the user does not appear in the login screen (el capitan)

  I see a user in the control panel users & groups of system settings, but it does not appear in the login screen. How can I fix it? I did a reinstall of system and see that the data is always there the prior installation.

  In users and groups > Connection Options, is the verified user list?

  If you have FileVault active it cannot list users until you type the Admin password for decrtpt disk.

• Help: Children are without going through the login screen

  My children understand how to access my account on my Macbook without having to type in the username and password.  Thus, for example, if my Macbook is on the login screen, they will be the following: (1) button press F1 to darken the screen. (2) press the key F5 to switch off the light on the keyboard. (3) press the power for a few seconds turn the computer off. (4) press the power button to turn on the computer. and then (5) press and hold the power button when the Apple icon and the status bar.  After a few seconds, they have access to my account as if they had signed using my login credentials.

  It becomes very annoying, because they have access to my laptop when I'm not there and I'm starting to lose control over the use of my own computer.  My question is: is it possible that I can keep my kids to connect to my computer this way and make sure my account access cannot be obtained by entering the appropriate user name and password?

  Thanks in advance for any thoughts/ideas/instructions you may have.

  "is it possible that I can keep my kids to connect to my computer this way and ensure access to my account can be obtained by entering the appropriate user name and password?"

  Yes it is.

  Open System Preferences > users and groups , and then select the password tab and select the Admin account on the left.

  Then click on: Connection Options (you will be prompted for your admin password)

  Now click on the the automatic connection: pop up menu and then select disabled.

  At this point, it may be advisable to change your admin password.

  With your administrator account selected in users and groups, click change password

  Write it down and store it somewhere safe.

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lost password: I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working

  I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Accounts of users not listed is not on the login screen

  Hello

  Today when I tried to connect to one of my standard accounts on my Windows 7 computer, I received the error message "the user profile Service has no logon. User profile cannot be loaded. »

  By reading this, first of all, I tried to restart my computer to see if that would solve the problem. It did not work so I searched how to solve this problem and followed the instructions here: https://support.microsoft.com/en-us/kb/947215

  I followed the instructions on how to fix this under "Method 1"

  However, after that, the icons for other accounts on my computer disappeared with the exception of a single administrator account.

  How can I get the other user accounts is displayed on the login screen? Help, please.

  Hello

  See if that helps you.

  1 do a Safe Mode system restore to before the problems:

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Enter the Mode Windows safe. Use the arrow keys to navigate and the ENTER key to select Mode

  http://www.computerhope.com/issues/chsafe.htm#03

  See you soon.

• Password changed after you disable the login screen

  Then I disabled my login screen, today and now when I start my computer, it brings me to a page that said 'incorrect password' and then returns to the login screen. Then when I enter my password it does not work. It seems that my password has been changed somehow when I disabled the login screen. In the meantime I can use my fingerprint reader to log on, but if I were to ever lose a finger in the future I wouldn't be able to access my computer. So, how can I reset my password?

  Curiously the admins cannot change her password without having to type the current password, but they can change the password of any other account without knowing the password.

  Not true - see here:

  1. click on the start planet.

  2. type the three letters cmd in the search box.

  3. press on Ctrl + Shift + Enter

  4. click on "run as Administrator".

  5. type the following commands and press ENTER after each:

  NET user "Zach" 123456
  The command above will set the password of the account selected to 123456.

• Impossible to go beyond the lock screen

  My wife and I are unable to go beyond the lock screen today. It's an iphone 6s and 7 times iphone running iOS 10. At the same time happened when we returned in the evening. When we enter the password, the screen freezes / hangs. Then, a minute or so later, it looks like to reboot the phone or reboot UI. then return to the lock screen. This is crazy. I feel like we're pirated! What is happening to someone else? Two of us do not have access to our phones!

  Have you tried a reboot?

  Reset?

  Restore?

• iMac returns to the login screen once logged on 10.11.6 version

  After you install the update for El Capitan 10.11.6 my iMac (21.5 "mid-2010) returns to just login screen after I connect.  The disc is fine and the permissions are correct.  I can start safe mode and connect without problems.  Any ideas?

  Greetings JPfromFairfield,

  Thanks for your post. I see that your Mac goes back to the login screen after you connected. You mentioned that you have done to ensure that the disc is fine and the permissions are good. Those who are very advanced. I know how much I rely on my Mac so I'll be more than happy to help.

  With your computer is able to start properly in Mode safe, this indicates that there may be a third-party service that is causing problems. I have some articles for you to check.

  OS X El Capitan: If you have problems with startup items

  OS X El Capitan: login users & groups preferences pane items

  You can remove all items start and the login items, and then test to see if you can boot normally, if you can, you can add one item at a time and continue his tests to see how the origin of the problem.

  Take care!

• Mac does not start at the login screen

  I have a Macbook Pro (15-inch, mid-2014) that will not stat upward, toward the top of the login screen.    It starts in a circle with a line crossing.

  It has a processor Intel i5 with 4 GB of memory and 256 GB of Flash storage.

  The Macbook Pro is on OS X 10.10.5... Yosemite.

  I tried to start it in safe mode by pressing on * during the shift and no resolution.

  Can someone help me?

  You have a good backup?

  Try restarting your recovery volume. Follow the directions for your problem.

  On the screens, you see when you start your Mac - Apple Support

• WHY MY USERNAME IS POSTER ON THE LOGIN SCREEN?

  When I connect this site, my USERNAME is automatically autofilled on the login screen. I would prefer not to have this happen. Is there a setting available that would avoid this? Thank you.

  This is a local setting on your computer - you are using a Mac or a PC? And what browser?