Cannot Hot Sync Windows 7 and TX - no driver

Similar Questions

• Cannot download 10 windows XP and IE 8 security updates. for all error messages are either: 0x800700D and 0 x 8007002.

  Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002.  Please help thanks.

  Thank you.

  Hi Pauli,

  See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).

• Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

  Original title: Windows Installer does not properly.

  I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

  Hi Murray,

  Have you followed the steps in your previous post?

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Problems installing and uninstalling programs on Windows computers

  Hope the helps of information.

• I am running windows 10 and need a driver for my superdrive drive

  I have a Surface tablet running Windows 10 and use my drive superdrive apple on this topic.  He needs a driver, but I don't know that one when I go to apple downloads to employment support - is there?

  Apple does not have a driver for use on a Windows System. You need a Windows driver that works with the drive in the drive mechanism - usually a mechanism Matsusita or Panasonic.

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hot Sync Windows

  Had to replace my Zire 72 with unit which worked OK and was able to hot sync both units. Did a master reset and get message when trying to hot sync: "the connection between your handheld computer and the desktop could not be established. Please check your configuration and try again. "Replaced by cable and different usb port used, checked the parameters of conduct and selected user name (but could not find the way to set the user name on the Palm device). DT Palm has two entrances, one for each of the data of the old and the new unit.

  Need help

  Now works. I experience the import/export function and set up a user name 'test' on the desktop.  Contacts exported from the file on the desktop 'test '. After this hot Synch worked without any problems. Science is not wonderful?

• Windows 8 and Franklin U600 driver problems

  Hello

  I have a modem USB U600 at Virgin Mobile, the USB modem drivers are not compatible with Windows 8.

  When you look at Device Manager I find there something in the sense of 'Error 37, impossible to initialize the drivers'.

  Is there no workaround possible to get this thing works with Windows 8?

  I spoke to the Virgin people and believe it or not the only thing to do is to return the USB modem where we bought it (the same thing happened to me). The USB modem is not compatible with Windows 8, and nothing else can be done. I find it incredible, but there you have it... They claim they have other solutions that work with Windows 8, but it remains to be seen.

• Cannot find the Windows.old folder in my drive and therefore not able to go back to XP to 7.

  I read the article on "How to get back to a previous version of Windows" : http://support.microsoft.com/kb/971760/
  I use Windows 7 Ultimate beta and found this irritating and much lower than XP. He has a lot of bugs and compatibility issues. It crashes every two hours and I lost many of my personal. So, I wanted to go back to my old XP by a clean uninstall of 7. When I inserted the CD at BOOT XP and pressed a button (as guest), he did not. He just started normally.
  Then I inserted within 7, but the gray tab XP installation ! Then I looked far from a solution of Microsoft and went to the link (above). It is said that I need the windows.old file back. But I'm not. I searched all my readers but could not find it. When I typed windows.old in the pavement of research (to the c:\ drive), 4 files are released: file:///D:/Windows/winsxs/x86_microsoft-windows-a..oldertool.resources_31bf3856ad364e35_6.0.6000.16386_en-us_111994699d72a71f/ two other similar to the present and a MUI file.
  Does this mean I do not have the windows.old file and therefore cannot go back to XP. Windows 7 will be released soon and I use the RC version. and so my version will expire soon. WHAT CAN I DO NOW?
  If there isn't a way, I'm sorry to say that I would be looking forward to the next new Google Chrome OS. I love Microsoft Windows for their sincere services. Please help me and do not let me down...

  The only time where you can roll to an earlier version of Windows during installation is when configuring real itself. He has no other choice after installing Windows 7 to return to your previous installation within the OS itself. You have manually will reinstall it.
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Cannot print with Windows 7 and Photosmart 7350

  Hello. Recently, I converted my laptop to Windows 7 Home Premium OS. I have no problem printing to work with this computer of our HP LaserJet but when I enter the problem starts. I have a wireless home network with my Photosmart 7350 connected to my desktop computer that is still running XP. The wizard sees the printer and adds but cannot print a test page. He says that it is waiting, then the print job disappears. I downloaded the Vista driver for the printer. When I run the troubleshooter, it cannot determine the problem. No surprise as convenience stores rarely did help. I got around the problem by sending documents to the desktop so far and then print it from there, but it gets old. Any ideas?

  Please install the printer on Windows 7 by using the following steps:

  http://support.HP.com/us-en/document/c01796821

• Tungsten T3: Cannot Hot Sync w/application in 'Quick Install'

  Yesterday, I was able to add applications to my T3, placing them in the PalmOne Quick Install, then HotSync from the cradle of the palm, connected via usb.  Now, fast installation no longer allows me to install applications to the T3.  If I put any application it must be installed, I get the message following error 'HotSync operation interrupted. Some of your data is NOT saved. "When I discovered the"View Log", it reads, ' HotSync error: a canceled synchronization request or did not respond to a HotSync notification." Make sure that no change data using applications such as Palm OS Desktop or installation tool. (8009)."I even tried to install on... expansion card a no go!   I even tried to install previously installed applications, still no good.

  I have ideas as to what may be causing my problem.  I did a search on this issue, on this site, nothing helps.  I hadn't used this T3 for over a year due to a dead battery.  Finally got it fixed and loaded all of my previous programs through "Quick Installation".  I cannot HotSync when there is not or the applications waiting to be loaded from the quick installation.  I use Vista 32 bit.  I don't know how to determine my OS on this T3, although I searched throughout this site for how to determine my OS, but, it was too much, nothing will do.

  Thank you

  Captain

  Hello..  I hope that you have properly synced recently as my next suggestion would be to do a hard reset as there is something on the device to the slaughter of the synchronization.  If you haven't synced it give a try without an application to the quick, I hope it will work.  Then do a hard reset which will erase all data on your device.  If you need instructions to http://kb.palm.com/SRVS/nua/launchKB.asp?c=887.   After the hard reset, delete apps from quick installation and synchronization.  Since you've done the hard reset when you sync it will ask you if you want to use and existing or create a new user name.  Go to use existing, and then select your current user and synchronization.

• Cannot install updates windows, KB2596856, and KB2596615

  Original title: dinkumwatch

  I have the window updates continually fails with errors KB2596856 and KB2596615, they will not install

  Hello

  1. What is the exact error message do you get?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2 :

  Try to put your computer in a clean boot state, and then try to install the updates.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to install the updates manually from the link.

  Update of security suites for Microsoft Office 2007 (KB2596856): http://www.microsoft.com/en-us/download/details.aspx?id=30626

  Update of security suites for Microsoft Office 2007 (KB2596615): http://www.microsoft.com/en-us/download/details.aspx?id=30614

  Hope this information is useful.

   

• Cannot connect to Windows 7 and after stabilizing off (cold boot), got a message bootmgr is missing.

  I went ahead and shut down my computer last night as I do every night. When I got home and turned on, I got a message to connect. I've never had to do before. It's a desktop pc. I use my laptop for that. Then when I turned it off (cold boot), after that, I got a message saying that the bootmgr is missing. Then, after that, I had no choice but to do a system restore. I found one of my Seagate external drive, which took most of my info on (until it became full and I could save is nothing else). So, after I recover most of the important things, I'll buy another external hard drive to back up my info, I should have backed up before. I must have got a virus. I don't know how, if.

  Hi Dotty,

  Thanks for posting your query in Microsoft Community.

  The description of the question, I understand you are facing a problem with Windows 7 login and you also mentioned that, when you have disabled (cold boot), you got a message bootmgr is missing.

  I appreciate if you could answer a few questions.

  1. What is the model of your computer?

  2. don't you make changes before this problem?

  3. you have backup DVD for Windows 7?

  The most common reason for BOOTMGR is missing include boot, responsible for the initialization of the operating system are either corrupt or missing. Another reason is that if the computer is trying to boot from a hard drive or flash drive that is not configured correctly.

  I suggest you follow the methods provided on the KB article below and see if that fixes the problem.

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

  http://Support2.Microsoft.com/kb/2622803/en-us

  You can also check this link below where SpiritX (community organizer) discussed how to fix the Boot Manager for Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Bootmgr-missing-Windows-7-Professional-64bit/3f38a5e5-ae49-E011-8dfc-68b599b31bf5

  Let us know the status of the issue.

• HP dv9700 is compatible with windows 7? I __can buy windows 7 and reformat the drive? __

  Update Vista to SP2, caused the system does not restart.  I went back to the factory settings, were properly put Norton update, then were 69 Vista upgrades to be applied and in the end, he stopped to start again
  explanation "a driver caused the... problem.

  Hi YD1.

  Welcome to the Microsoft Answers site!

  Need us some information to help you better with the question.

  (a) what is the exact error message you get when you try to boot to the desktop?

  You can try to do a startup repair and check whether the problem is resolved.

  Go to the link below to do a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You can access the link below to use a tool FIXIT update of Windows before you run the windows update.

  http://support.Microsoft.com/kb/971058

  I also suggest that you have the latest Windows Installer 4.5 installed on your computer.

  You can install Windows 7 on HP dv9700 laptop if it corresponds to the system requirements.

  For the minimum system requirements to run Windows 7 go to the link below.

  http://Windows.Microsoft.com/systemrequirements

  You may also contact the manufacturer for compatibility of the system you have. Access the link below for the same

  Welcome. HP.com/country/us/en/support.html

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information was useful.

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Portege Z930 - new Windows 7 and installing the driver

  I have a Toshiba Portege Z930 Ultrabook.

  I don't use it for a while because he was very very slow when navigating or attempt to perform other tasks. I scanned the system with several antivirus (now I have Avast and Fixila, but I also used Kaspersky and Norton) and nothing came.

  Now, I decided to reinstall Windows.
  So, I received a kit of Windows 7 Pro (it's the license granted with the laptop) and I'm fighting for a week to make it work properly.

  Now seems as graphics card does not work, I have most of the hard disk full some old files of windows, etc, etc.

  1. How is the right way to install a new version of windows on this laptop (without the old installation files) and use the accessories available on the laptop (graphics card, fingerprints... tool)

  And YES, I tried all THE drivers available on the Toshiba support successfully section only for the wireless card.

  2. have you had problems with the speed?

  Thank you
  Victor

  Hello

  > Now looks like graphics card does not.

  Does that mean exactly? Graphics card is recognized correctly in the Device Manager?
  In case it is, the driver is installed and works of the GPU.

  What Portege Z930-xxx are you?
  The exact part number might be useful to check the specs of the laptop.

  By the way: the driver / software installation is not very difficult.
  Forget the other Toshiba software if you n t want to install it
  Pick up the pilots only...

  However, some parts of the software as a value-added Package must be installed because this package installs a range of important public services.

• How to reinstall windows when the winows dvd is lost in windows vista and the hard drive is broken

  one of my system is windows vista Professional (OEM version), and the windows dvd is lost. In case of hard drive failure how can I reintall the operating system on my computer (of course after the replacement by a new hard drive).

  Hello

  "and the windows dvd is lost."

  I thought that you had lost the DVD.

  You can reinstall with the recovery DVDs provided with this computer on a replacement for her hard drive.

  If you have problems with this relocation, contact the manufacturer of the computer.

  See you soon.