Hot Sync Windows

Similar Questions

• Cannot Hot Sync Windows 7 and TX - no driver

  Group of cher-

  Bought a new computer, upgrading to Windows 7, I get message that there is no driver.  I downloaded the Hotsync palm Web site 6.2 upgrade, but I always get the error message about no driver.  I'm frustrated!  Any thoughts?  Npmoffatt

  just done according to instructions from another post of forum Palm, which I found through a search on Google (copy and paste now):

  "If the Win7 computer is on a Wifi network, forget Bluetooth and just sync via Wifi!

  See this thread, I wrote at the top of this section entitled "How to synchronize a TX to Vista64 via Wifi"

  Should be similar to Windows 7.

  WyreNut ".

• HP Pavilion 14 inch laptop: Palm M500 hot sync with 8.1 Windows 64 bit

  I have installed my software Palm Pilot M500 (from the original factory CD) on my HP Pavillion Lap Top. However, the hot sync fails and I get the following message: selected The COM7 Port is not available.  Hot Sync Manager will open port when it becomes available. »

  Suggestions, how can it clears and the hot sync enabled?

  It is a system of exploitation of 64-bit Microsoft Windows 8.1.

  Thank you

  You will need to:

  1. install Palm Desktop 6.2.2 (search for one of Wyrenut sons, where he links to it, a recent reshuffle of the forums by HP removed the stickied thread that kept the top of this forum where it was easy to see);
  2. Install the Aceeca 64 bit drivers (also doing a search here for synchronization with windows 64-bit); and
  3. install PalmHotsyncSetup of www.pimlicosoftware.com , which should make your M500 more compatible with the latest Palm Desktop.

  Good luck.

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G

• Hot Sync Palm Z22 with 64 bit Windows 7

  I just bought a new Sony Vaio running 64-bit Windows 7 and I am unable to Hot Sync my Palm Z22 to my computer.  I've been a Palm user for years, my being my model 3 of the current one and it has been my lifeline, but I am very agitated and frustrated that Palm people haven't posted updates to manage my current situation.  Everything I've read here indicates that the extra money to go towards infrared and some people are not yet a success while others have long struggled to finally make sync.  Someone out there a similar situation as mine, which would be ready to give me advice as to what I have to do and how to do in order to get my Palm to connect with my 64-bit Windows 7 platform?  Thanks to all those who are able to help.

  I have a new Asus with Win7 x 64 and after looking here and there in the way of the IR. Find for less than $10 on ebay, delivered USB iRda devices. Bought one, installed, Windows downloaded the new driver and worked straightup. $10 spent wisely, will give me a few more years with my trusty Palm.

• Hot Sync freezes on the calendar... Centro (sprint) & Windows XP

  Hope you can help... have you tried most of the suggestions thread.   Hot Sync & Palm Desktop (v6.2) worked without problem.   Palm Desktop has suddenly didn't show no data in Contacts or calendar.   Subsequent attempts to Hot Sync froze during the synchronization of calendar.  After reading the discussion over there, I followed the procedures to uninstall Palm Desktop (including registry changes).  Re-install the v6.2 met Frost even during the first attempt to Hot Sync.   Uninstalled v6.2 new & re-installed only the older version of office provided on CD-ROM.   Same result during the first HotSync (a gel or a continuous loop during the calendar sync... no error codes displayed).  My unit features: Centro from Sprint with software v1.08 (operation without any problem).   Specifications of the PC: Windows XP Pro with Service Pack 2.   Hot sync with USB cable connection.

  Additional comments: my HotSync problem is now solved.   If you encounter a similar problem, please read the following threads for the solution.

  you have a corrupted calendar that is why, if hangs on the calendar/Agenda during hotsync

  You may need to use the DBfixit software on your phone...

  Message relates to: Centro (unlocked GSM)

• hot Sync Palm Centro with windows vista

  When I hot sync via USB (I have 32, 64 bit not), the connection is established and the movements done, but calendar and contacts from MS Outlook are not transferred to the Centro.  Someone at - it a fix for this problem?

  Hello BetsyJBell, welcome to the Palm support community!

  Did you say Palm Desktop to sync with Outlook?   Looking for this entry in your computer:

  Start button / all programs/Palm/PIM led Sync / syncing with Outlook.

  Select it and try another HotSync.

  WyreNut

• Double list appointments on nursery hot sync

  For some reason, my hot sync hangs up on the Agenda because it is listed twice and therefore allows to synchronize the first and stuck on the second and I have to finish with the Task Manager and unplug the Centro to break out of a loop is in.  It comes from start so not sure what is happening.  Worked fine at first. If anyone can help... I have a Centro and am using Windows XP Pro and try to sync it with my Palm Desktop.

  Only a configuration option for each pipe in the hot Sync Manager so I can not uncheck.  Finally, I went in the chat room and ended up after a lot of time to do a hard reset and it seems to work at the moment but double pipes still show in the hot box sync so it can reproduce.  Thanks for all your help.  I can just pay for the dbfixit and try that again.

  Message relates to: Centro (Verizon)

• ZIRE 21 hot sync is not compatible with vista 64-bit program

  ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

  For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

  Laughing out loud

  You cannot change part of a 64 bit of Vista in 32-bit OS.

  32 bit and 64 bit OSs are completely different operating systems.

  See you soon.

  Mick Murphy - Microsoft partner

• Zire hot sync

  Hello

  I'm having a hot-sync problem from my computer palm zire with my new computer Inspiron 1546, 64-bit, with a home premium to windows 7.

  Running hot Sync Manager I have the icon on the bottom bar of the right tool in the system tray is a USB and it is checked.

  When I enter all upwards in the system at the end of a synchronization operation hot tray a failure box appears.

  That is the selected port COM1 is not available at this time. HotSync manager will open the port when it becomes available. the premises of the port series is empty and I can't get into something is where COM1 should be.

  In the setup of the box I looked into the hot sync LOG this message if poster is. The logfile c:\program (x 86)-palm\johnsw\hotsync journal is not found.

  Hoping you can help me

  With regard to bill johns

  Hello billj, welcome to the Palm support community.

  Your question is asked here, on a daily basis.  I refer you to the thread of fat at the top of this section entitled "Windows7 and Vista synchronization instructions.

  In short, you cannot synchronize via USB to any 64 bit OS.  The company Palm Desktop factory (access to the Japan) seems to have no interest in updating the program to run on this type of operating system.

  WyreNut

• Hard to hot-sync new E2

  Hello

  My old T3 died and I had to replace it with an E2.  I have the habit to use a crib with the T3, and which was very good.  I am running windows XP Professional and have tried several times to get the usb connection E2 works.

  I tried with the original disc, then downloaded the desktop 6.2 then the 4.1.4e and still no luck.  Whenever I press the hot sync button what happens with the new windows hardware found and when I try to tell him where the drivers are that it does not work.  The hot sync icon is on the menu bar below.  by clicking here and will install - local it tells me that the COM3 port is not available...

  I tried multiple usb ports on the front and the back of my computer (Dell dimension) and still no luck.  Also the serial port on the local tab is Com4 and I am unable to change this.

  I would greatly appreciate any help

  Thank you

  In the HotSync Manager icon, you see "Local USB" as an option?  Check it and uncheck the 'Local' (series connection).

  If still no joy, since you have installed multiple versions of Palm Desktop, I suggest to do a clean uninstall and go with my link 4.2 'Manual' below.

  WyreNut

• Hot Sync hangs at the agenda, agenda appears twice on the list

  I'm trying to migrate my Palm desktop to my new 64 bit Windows 7 PC.  The PDA is a Z22.  I've updated desktop to v6.2.2 and synchronization via infrared, as Win 7 64 bit does not support the Z22.

  When I try to do my first sync, Hot Sync hangs up on the Agenda (the only application that I checked for synchronization in the hot sync settings).  I ran DbFixIt2, who did find some files corrupted and deleted, but this has no effect on the next synchronization attempt, despite my once you have selected the setting "Pocket replaces Desktop.  I note that Agenda, address book, task list and Notepad appear twice on the list of State during the attempt to synchronize, but only once on the Hot Sync settings-Applications list.  During synchronization, the first quotation of Agenda indicates a successful synchronization (check mark), but it crashes on the second book to Date.  Tried to uninstall and reinstall office, without effect.

  Help!

  Thank you

  Jim

  Update... I didn't give it enough time.  Even on my PC new, great power, the initial synchronization (Agenda only) took 10-15 minutes.

  Jim

• Hot Sync failed

  Dear friends,

  When I try to Hot Sync my Tungsten E2 to one of my 3 desktops (Windows Vista), I have this message: "'could not launch the HotSync operation due to system error. ' "

  Is there a cure!

  Thank you
  Peter

  Are what update you referring?

  To perform a hard reset: (Palm Knowledgebase article #887)

  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  WyreNut

  Message relates to: Centro (AT & T)

• Hot Sync Manager cannot find the com port

  I have upgraded to windows vista and cannot Hotsync my Palm Z22 because when I try to configure the connections, hot Sync Manager says that there are no available com ports. I have a lot of free usb ports available. When I connect the device to the computer, I can hear the tones on my indicatine of the computer that the computer has recognized a new USB device but when I tho my computer, I don't see the plalm listed as a connected device. I installed the new Palm software that is compatible with Vista. Help, please!

  Success!. Communication established. Thank you for your help

  Message relates to: Palm Z22

• PalmIIx Hot Sync

  My Dell Inspiron 6000 crashed and I rebooted everything from the beginning, and when I reloaded the software for my pda, I can not hot sync more. I tried all that Palm has said for me to do. Can someone help me please? I am running Windows XP sp 3.

  Ok. Sorry, I couldn't help.

  Message relates to: Palm i705