Cannot import VMware ESX 4.1, Patch ESX410-Update01 in nine vCenter

Similar Questions

• VMware server 2.0 - cannot import vmware images for inventory

  I reinstalled my server from scratch (Ubuntu 8.04, 64-Bit including VMware server 2.0 build 122956).

  The installation program is fine and I can access my server with the VI 2.5 client. Unfortunately, I can't import my virtual machines through the VI client. The manual States that should be a link named "add the Virtual Machine to inventory. Unfortunately, I can only create new ones or enter maintenance mode (in the command window).

  I have just nownoticed that the web front end to VMware server offers this option.

  Therefore, it is no more a question but could someone else help to find a quick answer to his problem.

  With your host selected in the left pane, right-click on the data store and select "Browse datastore" (see screenshot). Find the .vmx file, right click and select "add to the inventory.

  If your virtual machines are not in the 'standard' default data store, copy them or create a new data store that includes the folders with your virtual machines.

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• Cannot find device write VMware esx server 3i image support to.

  Hello

  I'm fairly new Virtualization.

  I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:

  The installation operation failed!

  The installation operation has encountered a fatal error!

  Cannot find device write VMware esx server 3i image support to.

  The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.

  Information System

  Manufacturing: abandoned

  Model: abandoned

  Service etiquette: abandoned

  BIOS Rev: SGP4510H.06A.0083.2008.0819.1026

  OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.

  http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick

• IPSec on VMWare ESX 5.1 communication problems

  Hello

  We have 2 computer systems.  You running us VMWare ESX 5.1 and the other is running Ubuntu 14.04.  We have problems for IPSec to work between the two systems.  We cannot find any documentation or known issues with IPsec on VMWare ESX 5.1, so we're going to reach out to the community.

  Here's what we did:

  1. we configured Ubuntu and VMWare systems to use IPv6, we can ping each other using IPv6.

  2. we configure IPSec on an Ubuntu operating system by following the instructions below:

  https://help.Ubuntu.com/community/IPSecHowTo

  3. we have followed the instructions below to configure IPsec on VMWare.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021769

  Here's the problem:

  When 2 Ubuntu systems run IPsec, they are able to ping each other.  However, when allow us IPSec communications between VMWare and Ubuntu, the ping is suspended.

  Here is the result of the configuration of command esxcli on VMWare:

  UBUNTU. IPv6.ADDRESS-> Ubuntu IPv6 address

  VMWARE. IPv6.ADDRESS-> address IPv6 from VMWARE

  
  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------           -------------------------------------  -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  GoToDPSA UBUNTU. IPv6.ADDRESS VMWARE. Mature IPv6.ADDRESS infinity 0 256 transport 3des-cbc hmac-sha2-256 x

  VMWARE DPToGoSA. IPv6.ADDRESS UBUNTU. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  --------          ----------------------------------------  -----------        ----------------------------------------  ----------------          --------       ----     ------     ---------      --------

  VMWARE DPToGoSP. IPv6.ADDRESS/64 0 UBUNTU. IPv6.ADDRESS/64 0 everything on transport ipsec DPToGoSA

  GoToDPSP UBUNTU. IPv6.ADDRESS/64 0 VMWARE. IPv6.ADDRESS/64 0 in ipsec transport GoToDPSA

  Here's what we found:

  After debugging the problem (using tcpdump), we found that the VMWare system sends the ESP packets, but never sends a package AH (required for IPSec authentication).  Even when the encryption protocol is null, the system of VMWare would always send ESP packets, but never once sent a package of AH.

  Here is the resulting execution trace: Ubuntu - ping-> VMWare:

  ...

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 16): ICMP6, an echo request, seq 1, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 1), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 17): ICMP6, an echo request, seq 2, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 2), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 18): ICMP6, an echo request, seq 3, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 3), length 160

  Summary:

  There seems to be a problem with IPSec in VMWare ESX 5.1 on IPv6.

  We noticed that the downloads section of the site support provided patches for VMWare ESx 4.x and earlier, but lack of patches for VMWare ESx 5.x.

  Are there known issues in this area or available patches to fix this problem?  Your kind suggestions would be greatly appreciated.  Thank you.

  Sorry for the late reply, but here the analysis of what is happening and why you are experiencing a problem.

  The Encapsulating Security Payload (ESP) to IPsec protocol will encrypt a payload of the packet and can

  Optionally authenticate the packages as well. You do not include orders allowing you to set the

  Security Association (SA) and political security (PS), but the output in your post indicates that you

  you want to encrypt the payloads both authenticate packets in mode of transport between the hosts.

  I don't know why the Ubuntu IPsec HowTo examples using protocols AH and ESP to encrypt and

  authenticate the packets. In our view, it is best done in a single step with ESP, ESXi only

  offer the option of AH with IPsec. Of course, this requires configuring the ESXi server and your

  The host with a configuration of IPsec compatible Ubuntu (or any other operating system).

  To illustrate, suppose the ESXi server has the address 2001:db8:1 and the host of Ubuntu has the

  address 2001:db8:2. We will use cbc-3des for encryption of the useful and hmac-sha2-256 load for integrity

  authentication mode of transport - just like in your message.

  On the ESXi host, the commands to do this might look like this (of course, you need to generate your)

  own keys and not re-use those I did).

  # Add the outbound security association ESXi

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:1.

  -sa-destination = 2001:db8:2.

  -sa-mode = transport.

  -sa-spi = 0 x 200.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958.

  -sa-name = sa_1to2

  # Add the ESXi inbound security association

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:2.

  -sa-destination = 2001:db8:1.

  -sa-mode = transport.

  -sa-spi = 0 x 300.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7.

  -sa-name = sa_2to1

  # Add the outbound security policy ESXi

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:1 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:2 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -output = flow direction.

  sp-= transport mode.

  -sa-name = sa_1to2.

  -sp - name = sp_1to2

  # Add the ESXi incoming security policy

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:2 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:1 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -direction of flow = in.

  sp-= transport mode.

  -sa-name = sa_2to1.

  -sp - name = sp_2to1

  # List the ESXi security associations

  esxcli network ip ipsec its list

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  -------  --------------  -------------------  ------  -----  ---------  --------------------  -------------------  --------

  sa_2to1 2001:db8:2 infinite mature 2001:db8:1 of hmac-sha2-256 0 x 300 transport 3des-cbc

  sa_1to2 2001:db8:1 infinite mature 2001:db8:2 of hmac-sha2-256 0 x 200 transport 3des-cbc

  # List the ESXi security policies

  List of the sp network ip ipsec esxcli

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  -------  --------------  -----------  -------------------  ----------------  --------  ----  ------  ---------  -------

  sp_1to2 2001:db8:1 / 64 0 2001:db8:2 / 64 0 everything on ipsec transport sa_1to2

  sp_2to1 2001:db8:2 / 64 0 2001:db8:1 / 64 0 in ipsec transport sa_2to1

  On your Ubuntu host, you need a compatible IPsec configuration. In general, on linux systems

  use the command setkey BSD-door, this is done by changing the system-wide

  in/etc/ipsec configuration file - tools.conf.

  #! / usr/sbin/setkey - f

  flush;

  spdflush;

  #

  # SAs ESP using 192 bit long keys (168 + 24 parity)

  # generated using: dd if account = / dev/random = 24 bs = 1 | xxd - ps

  # ESXi supports 3des-cbc, aes128-cbc, or null

  #

  # AH SAs using 256 bit long keys

  # generated using: dd if account = / dev/random = 32 = 1 bs | xxd - ps

  # ESXi supports hmac-sha1 or hmac-sha2-256

  #

  Add 2001:db8:1 2001:db8:2 esp 0x200

  E 3des-cbc 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682

  -A hmac-sha256 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958;

  Add 2001:db8:2 2001:db8:1 esp 0 x 300

  E 3des-cbc 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552

  -A hmac-sha256 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7;

  # Security policies

  spdadd 2001:db8:1 2001:db8:2 all Pei in ipsec

  ESP/transport / / need;

  spdadd 2001:db8:2 2001:db8:1 all Pei on ipsec

  ESP/transport / / need;

  I have no problem of encryption and authentication of IPv6 traffic between a server ESXi 5.1

  and a host of 14.10 Ubuntu using this configuration.

• Upgrading from VMware ESX 4 to ESX 4 upgrade 1

  Hello

  I have one server of VMware ESX4, who also has VMWare vCenter server is installed.  Well, I can't run updates to find a way to never run updates of patches with the Update Manager vCenter.  Whenever I'm trying to make an update it is said cannot run the Vcenter server on the same host as the machine, I need to update. It is a huge problem. I have 2008 R2 I need to install and I have no way to know how to upgrade ESX 4.0 U1.  can anyone help me with instructions on how to do it?  I am very new to ESX and could really use assistance.

  Hello.

  If you decide to go with esxupdate option, this link can be useful.

  Good luck!

• Cannot install VMware Tools.

  Hello

  my client have esx1 and esx2 - vSphere vCenter device 6.0 and 6.0 knots. When I try to install VMware tools on Windows Server vm = error:

  VIX 21001 = error code

  Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 2 (no such file or directory). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine

  When I connect to esx1 via Putty and check ' usr/lib/vmware /-the 'isoimages' folder missing.»

  Please, what is faster solution?

  CZ THX

  Hello

  problem solved...

  I don't know why, but on esx1 - Local Direct USB access - declined, I restarted esx1 and now works perfectly

  so, I lost my network settings

  THX

  Tom

• Cannot import the selected file. Refer to the documentation...

  Hi all

  Of the very basic knowledge on Adobe products please bare with me! We have deployed v8 Adobe Captivate our users to test and when they try to take a PPTX file and turn it into an interactive e-learning courses, it fails with the message:

  "Cannot import the selected file. Refer to the documentation to ensure that you have installed the correct version of microsoft office.

  We have the SP2 of Microsoft Office 2010 (x 86) installed Adobe Captivate 8 before us. We tested and this works if the user uses a PPT file (2003 / 2007 Compatible file) which is a workaround but isn't ideal because they then lose the functionality of 2010!

  Anyone can confirm that Captivate 8 supports Office 2010, or this is exactly why we have this problem?

  V9 does support Office 2010 if this is the case, as if a patch is not solve this problem, then we recommend the customer to go to the product V9. One thing is that we use 32-bit with 64-bit Captivate Office but the fact that it works with legacy PPT I doubt it is the origin of the problem.

  Thank you!

  ChrisW

  As far as I saw, 9 Captivate does not handle this better than 8 Captivate.  But you can check it out yourself by downloading and installing the Cp9 trial version and see if that will import your PPTX.

  A few other suggestions for you:

  • Make sure you run Captivate (regardless of version) using the command run as administrator.
  • Also set PowerPoint to be launched using run as administrator.
  • Don't try to import a huge PPT or PPTX.  Do your tests on something small, say 10 or 20 slides.  This will alleviate the question if you really do turn into is a matter of PC resources.
  • Test with PPTs very sober.  Captivate imports can stumble on some objects incorporated into the PPT Slides.  So just having pictures, text, and anything else in your PPT test.

• Close VMware ESX 3.5 &amp; 4.0 hosts... What about the DRS?

  Hi experts,

  Here I begin this discussion to know the following:

  Facts:

  Farm with guests VMware ESX in u5 versions 3.5 and 4.0 U2

  DRS configured as entirely not automated, no rules.

  Issues related to the:

  What happens with DRS to deploy new virtual machines with Virtual Hardware 7?

  They will receive only on ESX 4.0u2 hosts?

  Could cause instability on the other virtual machines?

  I raise this because I have no experience in mixed environments, and I expect the DRS feature so smart that moves and power on virtual machines on hosts that are able to manage virtual machines with virtual hardware that is compatible with, I'm so innocent?

  Virtual machines with Virtual Hardware 4 can be moved throughout of these clusters 3.5 or 4.0, but what happens with VM with the newest virtual hardware?

  If they had moved in any case on a host ESX 3.5, what will be the behavior of this virtual machine?

  Last, but not least important, what do guys suggest to bypass this until I have all migrated hosts?
  (Migration of all hosts will take more than a month, support and SLA issues, so I need a workaround solution)

  Thanks in advance for your time and answers this!
  Kind regards
  RaMorn

  Hello

  1. what happens with the DRS to deploy new virtual machines with Virtual Hardware 7?

  2. they will receive only on ESX 4.0u2 hosts?

  3 could cause instability on the other virtual machines?

  1 VM' with HW v7 will be migrated only between vSphere 4.X nodes in a cluster

  2 VM with HW v7 will be only on vSphere 4.x nodes

  3 nope

  1. I raise this because I have no experience in mixed environments, and I expect the DRS feature so smart that moves and power on virtual machines on hosts that are able to manage virtual machines with virtual hardware that is compatible with, I'm so innocent?

  2. the virtual machines with Virtual Hardware 4 can be moved throughout these clusters 3.5 or 4.0, but what happens with VM with the newest virtual hardware?

  3. If they got anyway moved on a host ESX 3.5, what will be the behavior of this virtual machine?

  4. last, but not least important, what do guys suggest to bypass this until I have all migrated hosts?
  (Migration of all hosts will take more than a month, support and SLA issues, so I need a workaround solution)

  1. Yes, the DRS will be

  2. see comments of mu above

  3. nothing will change on the behavior of the virtual machine, only VMware tool will be updated

  4. all depends on how your is configured, how is use, VM how you would deploy during the month?

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• DELL PE R710 missing sensors on the tab 'Hardware status' vCenter ESX after latest patch update!

  Last month, I update all my ESX host with the latest patches for ESX from 28/04/2011 (ESX410-201104001) via the vCenter Update Manager, earlier this month, accidentally, I have some verification to be done in the server room and noticed a hard drive failure on one of my DELL R710 Rack servers, I you connected the VirtualCenter client and when I click on the tab 'Hardware status' (where the alarms about the) Configuration hardware server usually appear), I noticed that my storage sensors are missing, the network sensors as well! ?? I recall that on March I did have another server hard disk failure, but I saw an alarm (for predictive failure) on my vCenter and I call Dell to replace the drive back!

  I also noticed that now the number of my server sensors are between 73 and 88, before I remember although there were a couple hudred of them! ??

  After some research on the net, I did I frimware/BIOS upgrade of all hardware on the servers, as I install OMSA 6.5 and Dell management plug-in to vCenter and all seems to work just fine, but storage sensors and count sensor under the tab 'Hardware status' issue was not resolved. I think there is a problem with vcenter, because when I connect directly to the host through the vsphere client, in the "State of health" tab all the material appears correctly. I found subjects with similar problems, but they have been with HP servers and not answered or solved!

  Is there anyone with similar problem or no answer to my question?

  Thanks to all in advance!

  godjak

  PSIF there need I can post some screenshots!

  Confirmed.  Without patch ESX410-201104401-SG, my other R710 has a full complement of sensors.

• Installation of VMware ESX/ESXI 4.1 on HP Proliant DL360 G4

  Hello

  I think to buy an old HP Proliant DL360 G4 machine with 2 Xeon 3.6 GHz processors and 4 GB of RAM.  I intend to install VMware ESX or ESXI 4.1 on it.

  I read some reviews of VMware and other products of the hypervisor and all say that these 64-bit Xeons have no VT support option and therefore cannot run 64-bit Windows guest OS.

  Since I just use it as test environment learn more about Windows Server 2008.  I would like to know if I can install ESX 4.1 on the HP DL360 G4 and if so, can I install client Server 2008 32-bit Windows OS on top?

  Another machine, that I'm looking is the Dell Poweredge 2850, which has the same processor and roughly the same features as the DL360 G4.  So I want to know what a Xeon with no VT - x 64-bit is limitation of technology with regard to the installation of the virtual machines based on Windows on it.

  Thanks for any help.

  The Xeon 3.6 have VT - X, so you will not be able to run 64-bit OS comments, as you found it- http://ark.intel.com/Product.aspx?id=28019.  You would be OK for customers 32 bits, but you would be prevented from running Windows 2008 R2, because it is 64-bit only.   At this point, I wouldn't bother with a test server that cannot run 64-bit guests.  If you want to stick with a server-class machine I keep watch or watch a white box - vm - Help.com - see the list of the white box.

  Dave
  VMware communities user moderator

  ESXi Essentials free training / eBook offer

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

• ISCSI + VMware Esx 3.5 Std

  Hola a todos,

  Soy nuevo in el mundo of VMware grandiosos, y he tenido oportunidad trabajar in una empresa donde is ha implies the servidores fisicos Migración an office. El proceso ha sido grandioso (excelente, VMware VMware rules!), sin problema any important hasta el momento. Pero tengo una duda acerca como provide storage ISCSI one of uno lo con servidores ESX 3.5. Mirando a poco en google me Barbara e wont una version free of starwind. any ha used alguna ves este software? me such kind uno mejor? of free preferencia o bajo costo

  Information the deployment as deseo realize acerca:

  Con servidor IBM Vmware ESX 3.5 STD, este cuenta con back 60 GB datastore there sober estos are uno is encuentran los archivos una VM

  Como servidor HP target iscsi starwind con, con 465 GB RAID-5 (por software, stink are UN server delahoussaye media-baja)

  Deseo than mi ESX use el del HP para los archivos las VM save storage. Alguna mid-week there good practices ISCSI?

  There he achieved hacer esto:

  HP con servidor Starwind

  ! ISCSI2.PNG | thumbnail = true!

  ESX host

  

  

  Of photos muchas gracias a todos, Deseo aprender mucho ustedes as seguro are mas tiempo in el mundo of Vmware grandioso.

  * Bueno StarWind tiene el compadre a soporte Técnico

  muy bueno en quias, las icluyendo you could help *.

  http://www.starwindsoftware.com/images/content/StarWind_ESX.PDF

  * Buena

  Suerte *.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Firefox 15.0.1 cannot import bookmarks from Safari 6.0.1

  Hello

  Firefox 15.0.1 cannot import bookmarks from Safari 6.0.1.

  I followed the steps below:

  (1) all bookmarks in Safari to export to a file (file-> export bookmarks) HTML
  (2) import bookmarks into Firefox (bookmarks-> Show all bookmarks-> import and backup-> import bookmarks in HTML)

  Firefox seems to load the HTML file, but never bookmarks appear in Firefox.

  Any thoughts of why this is happening?

  Best,

  Jaime. -.

  You need to remove all the attributes of FOLDED into H3 tags with a text editor.
  
  Then the import should work.

  See also page 2 [932927/questions/932927]