Problem installing HP 1536 dnf mfp

Similar Questions

• Autofeed of the margins to scan to HP Laserjet 1536 dnf MFP

  Hello

  I have a HP LaserJet 1536 dnf MFP and have problems with the scanner of the automatic feeding system. Papers, I'm trying to make copies to make use of all the 8½ "x 11" "on paper and when they are copied are cut by about ¼" anywhere in the document. " Y at - it an option to make the paper to scan the whole 8½ "x 11" Manger? " Currently, my only solution is to reduce 88% printing, which produces a low police on the copies. Any help would be appreciated.

  Operating system: Windows 7 64-bit

  Thank you

  Invigilium

  I found the solution: buy something else.

• 1536 dnf mfp does not scan

  I bought my mac (OS X 10.6.8) and my printer 1536 dnf mfp in March 2011. Two well worked until last week, when my scanner stopped scanning. Printer, copier and fax machine still work. The HP software appears to be scan when I press "scan" in that the progress bar is enabled and it appears to 'think' he scanned something, but the images never appear on my screen as scanned. I did nothing recently to my computer or printer I can think of that would make this work stoppage. Help, please!

  Hello again ARGES,

  I have a great Charter which gives step by step instructions touninstall the printer software.

  If you have any other questions, please let me know.

  Thanks again.

• HP laser jet 1536 dnf mfp, 2 side by side 2 copies

  On 1536 HPLaserJet dnf MFP & MAC w OS10.7.2, how do I copy 2 side Multi Page Doc to 2 side Multi Page copy?

  lrlgll

  I have reviewed this information and am confused.  I also bought this printer for duplex printing. Yes, I can get it to duplex printing - but not for copies and analysis.  I have an older HP printer where I can accomplish this without problem. How do I double-sided for COPY AND SCAN 2 sided to 2 sides?

• HP Jet 1536 dnf MFP Lasere: 1536dnf MFP Scanner not installed

  Demand scanner my printer has stopped working about 4 months ago. I use Windows 7 and since then uninstalled the driver printer everything and removed the printer and re downloaded the driver full features. I tried to install the driver several times, but failed every time. I was able to reconnect to the printer, but has never been able to download a driver for the scanner and the application successfully.

  Whenever I tried to install the driver the message shown below to me.

  

  Hey @babantoad,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with installing the drivers for your printer Laserjet M1536dnf range on your Windows 7 PC. I can help you with that.

  To install the software:

  1. Click Start, in the search bar type "cmd" without the quotes, and open the command prompt.
  2. In this type of window in "msiconfig /Unregister" (without the quotes) and press ENTER.
  3. Type "msiconfig/regserver" (without the quotes) and press ENTER.
  4. Click Start, in the search bar type "msconfig" (without the quotes) and press ENTER.
  5. Click the Services tab.
  6. Click Hide all Microsoft Services.
  7. Click Disable all.
  8. Click the Startup tab.
  9. Click Disable all.
  10. Click Ok and reboot your PC.

  At this point, you should be able to run the Setup program. If you are unable to run the installer, there is a problem with your operating system. Your next options would be:

  • Run the Microsoft Fix It.
  • Contact who is provided with the PC.
  • Contact Microsoft directly.

  Please let me know the results after following the above. If you are able to install the software, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Install disc lost for HP 1536 dnf MFP

  They gave me the MFP to our office for use in the home because it is to small for our office. Problem is that they have lost the installation disc. How can I get it work?

  Here is the link to download the software from HP.com.  Just select your operating system and download your printer software/driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3974279&LC=en&cc=us&DLC=en&lang=en&cc=us

• HP LJ 1536 dnf MFP: 1536 Fax installation issues

  I'm on a land line telephone CentruyLink. The line comes out of the wall in the 1536 and comes out on a phone. Is there another phone connected to this line in my house.

  The FAX is set to automatic and two rings. Using the test HP Fax number, the phone rings, I answer, I get the FAX noise, hang up and the FAX is printed.

  BUT when I telephone number using my cell phone, it rings, I pick-up and cell phone noise Telec.

  This use to work properly, but now I'm having trouble. I spoil the putting in place or is there something wrong with the Fax/printer? Or maybe Qwest did something for the line.

  Hey @DanielF,

  Thanks for getting back to me on this subject.

  When you use a phone line shared with your fax, phone and answering machine you would have normally established for the answering machine takes first.  You want the fax machine must be set to answer 2 rings after the answering machine. With this configuration, you would be able to receive faxes, answer messages and telephone calls on a phone line. When you will be sent a fax that is generally a good rule to have the person who sends the fax call you in advance to give you just a heads-up that the fax will be sent to you. In this way, when the fax is sent you just listen to the answering machine pick it up after 5 or 6 rings. Fax answering tuned and if fax tones are detected the fax answer. If you're not home you will still be able to receive faxes and answering machine messages.

  If you prefer this Setup, please follow the steps below to configure you fax.

  Step 1: Set the answer Mode:

  1. Click on the button Setup (key) on your printer
  2. Right arrow to Fax Setup and select OK
  3. Select OK in the basic configuration
  4. Right arrow for Answer Mode and select OK
  5. Right arrow for TAM and select OK.

  Step 2: Set up the rings before answer:

  1. Click on the button Setup (key) on your printer
  2. Right arrow to Fax Setup and select OK
  3. Select OK in the basic configuration
  4. Right arrow for rings to answer
  5. You will be able to set this to 1 ring to 9 rings. Remember, this must be set to 2 rings higher then your answering machine. If your answering machine picks up suite 5, set the rings to answer on your fax to 7. If your answering machine picks up suite 6, set the rings to answer on your fax to 8. The difference of the 2 ring will allow your printer enough time to 'listen' to the answering machine and raise the fax if fax on the line.

  Please also define Mode of fixed STOP error and fax (V29) at Slow speed in accordance with the instructions in my previous post.

  Please let me know if the steps I provided work for you. Good luck!

• HP laser jet m1536 dnf mfp: HP 1536 dnf update failed in wndows 7

  I try to install hp laserjet 1536 dnf in windows 7 64 bit os via usb wired. When I plug the printer during the installation on display printer update failed. I tried with the software of all the features, but who also does not work. If someone have a solution?

  Hi@sulbihar ,

  I understand that you encounter problems installing the printer software. I would really like to be able to help solve this problem.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet.

  I have provided a few steps to try, to see if we can get the printer completely installed on the Windows 7 computer.

  Unplug the USB cable.

  Uninstall the software from the CD: press the Windows key and the E key to access the window from the computer. Make a left click Open in a new window, right click on the printer CD, double click on uninstall.

  Perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows.

  Rerun the installation, just after connecting the USB cable, (make sure that the USB cable is connected directly to the computer and not a host or hub station) immediately follow this document.  A fatal error during Installation of the software. After that, the installation should continue.

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• 1536 dnf laser jet installation issue

  I recently bought a laser jet 1536 dnf for my office.  When I try to install the machine with the driver supplied and downloaded on the website of hp, I can 99 percent, a long wait, and an error message.  I managed to install the machine by using the generic driver of hp Windows 7, but the scan does not work.  Can anyone help?  I found another person with this problem, but it doesn't have a solution either.  Thank you.

  For me, the problem was related to HP Universal print driver installed on the system. (WinXP x 86)

  1 remove the HP Universal print drivers, reboot and run the installation. (not the option I used because I need Uni of HP driver for other printers on the network)

  or

  2. during the installation process when the system detects and installs the printer I noticed that he installed the HP Universal driver.

  At this point, I left 1536dnf install process

  Open Device Manager

  clicked on display and display devices

  printers expanded

  Right click on the HP Universal driver

  clicked on put updated driver

  you click on no, not right now

  Install the printer from the list

  Click on don't search, I will choose driver

  Choose the HP LAserJet M1530 MFP PCL6 driver

  WinXP installed this driver and 1536 HP install process is completed without problems.

  same process should work for Win7 x 86 or x 64

• I'm cann't print my printer LaserJet 1536 dbf MFP by Tcp/IP

  I installed the new printer laserjet (dnf MFP HP LaserJet 1536) with driver when I download from the HP Web (Full Version).

  When the driver installation is finished I have connected answer my printer with the mode of manual configuration of networking (TCP/IP)

  After that I already finished move to test the scan with flat screen, charger charge, fax / output, but cannot print

  but I use the USB cable to connect my printer could print

  Question: how to configure the printer to print with TCP/TP

  Hello MoUOun,

  Welcome to the HP Forums!

  I understand that you are unable to print using the Laserjet MFP 1536. I will do my best to help you! First, what is your operating system on your computer? Windows or Mac?

  I recommend you to download the print and scan doctor, to check if this utility corrects why you are unable to print. (It is only for a Windows computer.) Please post the results on this post, if this fix anything.

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the HP printer will not print make sure that the printer port is correct, which is shown on this document.

  Please post your results, I will be looking forward to hear from your part, have a great day!

• LaserJet 1536 dnf: failure scanner laserjet 1536 dnf

  After the upgrade to windows 10 (64-bit) analysis feature does not work. I reinstalled the program and it worked for 5 days that he had a number of Microsoft updates and I have observed that the function of scan failed. Scanning interface indicates that it is unable to communicate but the light works and the scanner moves on the flat. Printer and fax functions work.  The drivers for the scanner are not compatible or there is a problem of communication back to the computer security prevents the generation of an image of the OCR.  Multi-funtion printr is on a LAN.

  I tried with another computer (windows operating system 7) which is connected wireless and scanning in color function worked. In addition, I installed HP Scan and Capture application available for free from Microsoft store and it works in color on my computer. You will remember that the interface for the HP Laserjet 1536 dnf works B & W and grayscale in all ppp parameters, I'll wait for an update for the drivers of HP and when I need color use HP Scan and Capture software

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?