Cannot install Broadcom Bluetooth 4.0 driver

Similar Questions

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite L655-145 cannot install the bluetooth stack

  Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

  PS. Sorry for my bad English.

  Hello

  As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
  This means that Wlan and BT functionality is controlled by a single card.

  If you BIOS outsider (don t know why) Please put failing first.
  Save the changes and reboot the laptop.

  Then download the BT BT Toshiba stack.
  Activate BT (FN + F8), then launch the installation of battery BT once more.

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Cannot install the Epson CX4800 printer driver in the new Win7 64-bit system.

  I have a new pc with Win7 64 bit. I downloaded the driver Vista/Win7 64-bit on the Epson site. The Installer-error at the point when you try to install the driver. I checked Device Manager and can see Printing USB support in the USB controllers section. When you view Device Manager, I can unplug the printer USB cable and USB printing support icon goes. When I plug the cable into the printer, the reapperars icon. I can scan documents from the printer to the computer. I can also copy the parts of the printer on the paper. I can't get the driver to install. Windows simply says "driver not installed device software." I run the driver installation program Epson 4 times with no success. Your help is appreciated.

  Hi halbad,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f1d234f2-d14c-4b0a-A2ac-53fb72fb5357

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L755D - cannot install the Bluetooth driver

  First of all, I am sorry that I have little technical knowledge.

  I recently bought this laptop and the sticker on top has the Bluetooth logo ' Bluetooth 3.0 + HS. "
  The Bluetooth logo does not appear anywhere else and just F8 offers wireless market.

  Start > all programs > Toshiba > Bluetooth offers a variety of options. They all try to install Bluetooth driver who stops and asks me to connect the Bluetooth device.
  Controp Panel > hardware and sound > Bluetooth COM Local does the same thing.

  I was not able to recognize a bluetooth device in Device Manager.
  Please help as I would like to use this feature.

  Hello

  What L755D do you have exactly (L755D-xxx)?
  Have you checked s operating manuals and instructions how to activate the BT module?

• Cannot install Broadcom Wireless LAN Driver sp45524

  I have a HP G60-120US and had very slow wireless speed problems since I upgraded to Windows 7 (I have no problem when connected with a LAN cable). I tried to upgrade to the sp45524 driver (Broadcom 5.60.18.8 REV: B) but he kept to return to driver Atheros AR5009, even after I tried to remove the software. Please help with any suggestions you may have on how to replace the driver Atheros with Broadcom one. Thank you.

  Try to install this:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45635.exe

• HP Pavilion dv6 Notebook PC: cannot install the Bluetooth driver

  I have a HP Pavilion dv6 A1U55AV who had a hard drive failure. After replacing the drive and the installation of the operating system, I was able to get all the drivers reinstalled except bluetooth. First of all, the HP support site gives me three options... Looks like it should just give me a. Which should I use?

  I tried to use the Intel PROSet Bluetooth Driver, but I get the following error on my machine (FYI - Windows 7 Professional 64-bit Service Pack 1 is my operating system).

  

  I'm using the correct driver, and if so, why the installer does not work?

  Hello:

  If you are sure that your laptop came with built-in bluetooth (the Realtek 8188CE wireless card can come in a combination or card bluetooth not combination), then this is the bluetooth driver you need for this wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93602-3 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0007

• Re: Portege R400 - cannot install 3G on Windows 7 driver

  Hello

  I installed Windows 7 Beta on my R400 Windows Vista cannot use on the R400 (way to slow down).
  Everything works fine except for the 3 G module.
  I am not able to install the drivers.

  The latest status info is "copying new files" before the beginning of the installer roll back automatically and ends with the message "not installed".
  I tried redownloading the file, but no luck

  Any idea?

  Hello

  Windows 7 is a beta version.
  Eventually it a bug in the OS

  It would also be possible that the Vista driver is not completely compatible with the OS Win Vista 7 and so it cannot be installed on this operating system.

  As you can see everything that could cause this problem

• Tecra S1: Cannot install Windows Vista - ACPI.sys driver problem

  Get the blue screen when you try to install Vista Ultimate edition on my Tecra S1--> STOP... ACPI.sys incompatibility.

  Someone knows how to fix this problem and where can I find an update for this driver?
  I already have the latest version of the BIOS (2.50) and don't see any driver update on the Toshiba site...

  Someone at - it already correctly installed Vista on this type of laptop?

  Hello, Johnny

  Robin is quite right. Tecra S1 is a portable older and certainly not Vista supported. As you know just for laptop with Vista capable sticker are supported Vista and Toshiba offer a BIOS update to make it Vista ready.

  I recommend you to use Windows XP Home as before. Optimize Windows XP Home edition preinstalled and you will have very good performance on this laptop more old.

  Bye and good luck!

• Satellite L300D-242 - cannot install Vista after replacing HARD drive

  Hi wonder if anyone can help mei have a L300D_242 toshiba satellite that broke down and I bought a new hard drive for it because the original was not good.

  I tried to install a Vista premium 32 bit on the new hard drive, but it does not install until the 4th stage and then stops or hangs until he finishes.

  Does anyone know how to install a new hard drive and windows on this laptop?

  Thank you

  Hello

  What Vista did you use? TOSHIBA recovery disk or a disk of Microsoft Vista?
  Format you the new HARD disk before starting the installation of Vista?

  It is possible that the new HARD drive is not good and therefore the system can not be installed properly
  You can check the drive HARD using a tool called Drive Fitness Test download this as its a freeware program and test your HARD drive.

• Satellite A300 - 1 2 cannot install Win Xp - lack HARD drive

  Hello
  I just bought a new Satellite A300 - 1 2 without an operating system. Now I would like to install Win XP, however, during the instalation, I get a message indicating that installation of windows is not all hard disks installed on the system. What could be the problem?

  Please don't be angry with me, but you search here in the forum for similar cases?
  I imagine that you didn t

  So, use the forums advanced search and the search option for driver SATA, Intel Storage Manager, etc.

  There are a lot of discussions about this theme

• Re: Satellite P500-12F - cannot install the new nVidia display driver

  Good evening

  I'm sorry for stupid question, but I don't know what to do. I have the Satellite P500-12F.

  I tried to download the new graphics drivers for the NVidia card, I went to the site of NVidia and downloaded a new driver, which dates back to December 2009, instead of mine, which is July 2009, however, when I try to install it, the system indicates that Joana does no hardware that is compatible with the new driver.

  Could you tell me, what am I doing wrong? I could use any guidance as well. Thank you very much!

  Hello

  Why you try to use the nVidia display driver? These drivers are not pre-tested on the laptop and installation is at your own risk! In the worst case, you could destroy the graphics chip.

  As Akuma written already using the latest drivers Toshiba because they are pre-tested.

  Why you want to update the display driver? You are not satisfied?
  Remember: never change a running system! ;)

• Cannot install the Trusted Platform Module Driver / software

  I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?

  Hello

  Have you checked the BIOS settings? Maybe the TPM must be enabled first.