Cannot install driver nVidia and BSOD on Satellite P50 - A - 01

Similar Questions

• Installer doesn't seem to work properly. Cannot install driver printer and other items.

  Earlier this week, I got a virus.  That was resolved, however, my printer did not work properly, so I tried to update the driver hoping that would solve the problem.  I could not install the driver, even after spending most of the day chatting with hp support.  I got following messages is displayed:

  "Windows encountered a problem installing the software driver for your device."

  and

  "Cannot install the printer.  Impossible operation completed (error 0x000003eb). »

  I hope someone is able to help!

  Thank you.

  I'm all set... solved my problem of microsoft support... I shouldn't have wasted my time with hp!

• Tecra M5: Cannot install driver nVidia on Vista Ultimate SP1 x 86

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  I also posted this in the Vista forum I felt that it was a problem that is not specific to my hardware, but for vista SP1 in general, also appeared to be a much more active Board

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Cannot install driver WIFI on my Satellite Pro DR L850-1

  Hi guys,.

  I installed windows 7 64 bit on my Toshiba Satellite Pro DR L850-1 by making the new partition which formats the hard drive.

  After installation I was expecting windows 7 will find the drivers from internet or if not I'll download them from Toshiba Web site.

  I downloaded and installed all the drivers from the LAN and WLAN drivers first.
  All the other drivers installed perfectly and their respective hardware works fine, but the WLAN Atheros driver that does not install the Setup program does not start and I tried all means known to me or I can find on the internet to install it.

  Any help will be much appreciated.
  Thank you.

  Generally after a clean OS install, you should start with the chipset driver, display driver, driver sound and so on.
  Have you installed driver chipset before you tried to install the WLAN driver?

  By the way: you try to install this driver from the Toshiba download page?

• Satellite A200-1 s 5 - cannot install driver LAN after installation of Windows 7

  I have a laptop Toshiba A200-1 s 5, serial number: X7357433K. I just installed Windows 7 and downloaded and installed all the drivers of Toshiba laptop. I have no problem device in the system information screen.

  In Device Manager, the cards I have that the "Intel (r) PRO/Wireless' network. When I install the downloaded driver for LAN (lan-20091103092515) it says "Realtek LAN Driver V7.003.0522.2009", but I can't not under network adapters - I don't know where he's going? I can't find everything Realtek device in Device Manager. Needles to say works Wireless LAN, LAN does not work.

  Connectivity doctor shows Wireless Lan, Dial-up Modem and Bluetooth, but no LAN. Trying to load the driver from Realtek - does not help. -message: the device does not work properly because Windows cannot load the drivers required for this device (Code 31)
  I even tried to install from Realtek and update the driver for lan-20091103092515 - same error Code 31.

  Hey Buddy,

  You have an unknown device in Device Manager? This could be the missing LAN card

  Also check if there are devices hidden in Device Manager. So open the Device Manager and go to view > show hidden devices.

  Normally, you should now see the LAN card and then you can update the driver.

  Check this box!

• Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

  Hello

  I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
  I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

  Can someone help me?
  Where can I get the right drivers network controller vor and WLAN card?

  Hello

  As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
  Driver WLAN can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
  But note; You must choose the Archive in the type of product because it old series.
  There are two different LAN drivers;
  -LAN driver v 9.2.24 for Ethernet Pro1000
  -LAN driver v 8.0.43.0 for Ethernet Pro100

  In order to check both!

• Cannot install driver Windows XP Home edition for WLAN card on my Satellite A200 - 14 d

  I have a problem with the driver for win xp wireless
  I installed win xp and the only problem is the wireless lan driver
  Help me please

  Hello

  Please visit http://aps2.toshiba-tro.de/wlan/ and you can find all the drivers of real WLAN card.

  Good bye

• Cannot install driver update.__Graphics need something. He tells me that there is a solution.

  I have two problems. The first is, I can not install the patch (KB973636) I get an error code 646.
  Then when I look into the solutions of a problem my graphics device disk has stopped.  I check the updates and it indicates that the driver is up-to-date.
  I'm relatively new to the computer, so I do not understand all the terms.

  Hello

  You have Works 8 installed on your computer? If this is the control panel - Windows Updates - right-click on
  It CACHE - sometimes updates will offer an update, that you don't need.

  If you work 8 go here and put the KBxxxxxx number to download.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  ----------------------------------------------

  To the problem of display driver (video), update your video driver manually using these methods - you can also update
  others as needed.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot install drivers nVidia on M5-581TG

  Can anyone help please.
  I just bought a new M5-581TG with Win8 (I couldn't is no longer one with Win7, what I need).
  I reformatted the SSD and installed Win7. However, I can't load the drivers nVidia for the GT 730 m.
  I don't always get "no hardware found. I also tried to launch the program of detection of nVidia and who says that I have to
  obtain the driver from the manufacturer. I'm guessing there is a setting that needs changing BIOS but I can't find
  whatever it is (I don't have the password that allows me to access secure - start it shows password as "FROZEN" I think.)
  Can someone advise please?

  Update

  I've had zero help, I thought I would post my findings. They can be useful to others.

  Windows 7 Ultimate is now installed and works a treat!

  The graphics card problem is now solved. I do not understand why, but I had to install drivers nVidia for Windows 8 Acer despite my demotion to Windows 7. Yet, the Acer driver provides for Windows 7 are very old, so it was a bonus that the drivers of Windows 8 worked in only a few questions behind (307.17). nVidia site has 314.07 as later but they cannot run - I just received a message from nVidia that I have to get my manufacturer drivers. As this seems to be some time before Acer make available, I thought I would have a try to make compatible the 314.07. After some effort I managed and now uses the latest version without any problems. So, it is good to know that it is possible to "do it yourself", but not for the feint of heart.

  The problem of 'Frozen' hard drive seems to be a kind of glitch but software Intel confirms everything normal and not password protected. Twice now, when I checked the BIOS, it has been shown as 'Clear' - today it is 'frozen '! Go figure. I just need to determine if I can pass to a Samsung 840 - don't know if it will be physically fit. Finally, I am only just beginning now to 'use' the machine (I'm a software developer) and play the odd game - excellent rates too! So far this M5 seems to be a brilliant machine!

• Cannot install windows updates and updates history screen is empty.

  I can't install the windows updates. I have Windows Vista Home Premium. My automatic update is running... I studied and thought that the problem was with some service pack 2 I had to install - I did and nothing helped. My windows update history page is completley empty and Iwonder why. Also, I now can't seem to connect my Nokia phone to my computer as he finds the right driver online, but then it cannot install it. Can someone tell me what on Earth is cause of these problems. Thank you

  The computer had only preinstalled Norton or McAfee, but I've since deleted these programs because I found them to be boring...

  A properly installed, fully functional anti-virus application should never be boring. Although that pretty much excludes from the application of all the Norton and McAfee in my humble OPINION, there are others available.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for freeand download/run the appropriate removal tool before installing updates, Service Packs, Windows or the IE upgradesand before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you! Good luck.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install driver vga after windows recovery

  I have an acer aspire 5520g.

  For a long time, I was unable to install any except the generic vga driver.

  Now, I used the recovery tools to reset the computer to factory settings. When you try to get into windows for the first time, I get a message of 'windows install' the pc restarted unexpectedly or encountered an error. This time after the installation.

  I found that I can use 'SHIFT F10' to open a line of cmd, and there use devmgmt.msc to access Device Manager, where I find that the only missing factor is my vga driver.

  No matter which driver, I'm trying to update the standard / driver nvidia it generates a message: Windows found the driversoftware, but an error has occurred when trying to install, this devcice is incorrectly (code 1) configured.

  I found that some drivers for all devices can be installed, same removal work already pilot will result in not being able to reinstall the driver again.

  I hope someone can help, provide more information of system if necessary.

  Hello

  you used the Recovery Manager Acer reinstall vista

  It's their process non-microsoft

  drivers should be installed during the recovery process

  For more information contact Acer;

  http://support.Acer.com/us/en/default.aspx

• Cannot install the Nvidia NVS3100 under XP T510

  Hi for some reason, we had to install windows XP instead of windows 7 on a T510 with NVS3100 video card;

  I'm unable to install the Nvidia driver 6md136ww.exe!  The program gives me that an error could not find the driver for your hardware.

  I really need help.

  Ref:

  PCI\VEN_10DE & DEV_0A6C & SUBSYS_21D817AA & REV_A2\4 & 26E957CF & 0 & 0008
  T510
  4313 - cto

  Hi and welcome to the forum!

  You have the Nvidia Optimus model or simply Nvidia with switchable graphics? See this support page, check and then let us know.

  Keep us informed.

  Edit: Also, have you changed switchable to discreet in the BIOS before you install the driver? I do not believe that XP supports switchable graphics, others is your XP updated to SP3? It is a requirement.