Cannot install iTunes, error: error occurred during installation before iTunes could be configured.

Similar Questions

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• Fatal error occurred during installation of the file. The willingness of cleanup now install and get out. so that the installation of BIAPPS 11 g

  Hello

  I install BIAPPS 11.1.1.8.1.  I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6.

  I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager

  at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error:

  "Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'.

  Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow.

  Thank you.

  Hello

  I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade...

  Do all this, then upgrade will be smooth.

  Thank you

• error occurred during installation urm on content server

  "" We are trying to install version urm ' 10.1.3.5.0 (Build 07_06_2009) "on the content server ' 10.1.3.3.3 (080807).
  
  the error occurs with the output of the server log:
  
  helperservice: exception in INDEXERSTATE service. INITIALIZE_SUB loadFieldInfoFromMetadata [11]-32-32 cannot run the service (null) and function loadFieldInfoFromMetadata.
  (System error: there is no such thing as the "dDecimalScale" column in this table.) The 'dDecimalScale' column does not exist in this table. [Details]
  An error has occurred. The stack trace below shows more information.
  
  ! $helperservice: exception in INDEXERSTATE service. INITIALIZE_SUB loadFieldInfoFromMetadata [11]-32-32! csServiceDataException, loadFieldInfoFromMetadata (null)! $! csSystemError,! syColumnDoesNotExist\, dDecimalScale! syColumnDoesNotExist, dDecimalScale
  intradoc.common.ServiceException:! csServiceDataException, loadFieldInfoFromMetadata (null)! $! csSystemError,! syColumnDoesNotExist\, dDecimalScale
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
  at intradoc.server.Service.buildServiceException(Service.java:1999)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
  at intradoc.server.Service.createServiceException(Service.java:1988)
  at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1450)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1417)
  
  Can you find for me if there is a patch that will address this issue? »
  
  Thank you very much

  Hello

  This error occurs because you are trying to install URM 10.1.3.5 on UCM 10.1.3.3.3 and the error mentions "dDecimalScale". This new value has been introduced UCM 10.1.3.5.0 and for this you will have to download the latest patches from metalink 6907073 group and install and activate the same on CS.

  Then restart the CS and quite sure that you will not hit this problem. This issue has developed due to version incompatibility.

  Let me know the results.

  Srinath

• There was a problem installing HID Non-User Input filter data (KB911895), a fatal error occurred during installation of the device

  I tried to uninstall the faulty data filter & reinstall download (KB911895). all attempts fail & downloads auto continues trying to install "ad noursium". How can I solve this problem please someone? Brian

  Hello

  Step 1: Follow these steps and then try to install the update.

  1. go to the location: c:\windows\system\drivers\
  2. search for and rename the file wdf01000.sys wdf01000.old
  3. restart the computer.

  Step 2:

  Reset windows update components

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install iTunes on a PC brand new.

  I just got a new PC (Dell Inspiron 3650 with Windows 10) and am not able to get iTunes to install. The installer will download, but I get the following when run error message: errors occurred during installation before iTunes could be configured.

  Now, I tried four times with the same result. There is no Apple software installed on this PC - just got today.

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Error: An unexpected error occurred during automatic creation.

  Hi all

  After that DBA applied the cumulative Financials Patching - 12.1.3 + Recommended Patch Collection 1 (CPR1) and HRMS Suite patch (HR or 6) in a test instance, we encountered ERROR when you attempt to manually a PÒ of automatic creation of an approved of.  Error received as

  «Error: an unexpected error occurred during autocreate.»

  Could someone advise what problem could cause this or how hard to pull of this problem?

  Thanks in advance,

  Hbiuser

  Please apply patch: 18724731 for this known bug. Here is the Doc ID: 1629612.1 for your reference.

  Chetan

• Windows Vista cannot install Itunes. An error occurred during the installation of assembly HRESULT:0 x...

  * Title *.
  An error occurred during the installation of assembly ' Policy.8.0.Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32-policy", publicKeyToken = "1fc8b3b9a1e18e3b" processorarchitecture = "x 86". See Help and Support for more information. HRESULT:0 x...

  I tried everything that you guys mentioned here http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-unable-to-install-itunes-an-error/1099136a-03df-4da4-966c-5a4e56b8f202?page=1&tab=AllReplies&tm=1318189137621 but I do not have file of the registry size limit.

  I also tried these solutions http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/an-error-occurred-during-intstallation-of-assembley/7a2c7cfd-1e0f-40c4-bf96-896134ecda51?tm=1318188952925, but I still have an error during the installation of Microsoft Visual C++ 2008 Redistributable Package (x 86). Error is:

  Error 1935

  "Microsoft.VC80.ATL.type ="win32".version ="8.0.50727.4053".

  "publicToken ="1fc8b3b9a1e18e3b.processorArchitecture ="amd64" '. I tried with Microsoft .NET Framework, but it does not work eather.

  I try 2 days to install itunes without success...

  Any help, please?

  Run the SFC/scannow using the Administrative Mode command prompt

  Attempt to open the CBS log

  Open Run - type the following and press OK

  %windir%\Logs\CBS

  Look for entries stating can not repair and note the file name

  If it does not repeat the steps listed in my previous post to open the CBS log in Notepad

  Startup Repair - analyzes your installation of Windows Vista for issues and fixes

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

• Windows 7 cannot install Itunes. An error occurred during the installation of the Assembly HRESULT:0x800736FD

  * Title *.
  "An error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", publicKeyToken ='1fc8b3b9a1e18e3b ", processorarchitecture ="x 86". See Help and Support for more information. HRESULT:0X800736FD

  Windows xp to Windows 7 32 bit install home premium.  iTunes will not install.  Installation hangs on publishing product information, gives this error message:

  "An error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", publicKeyToken ='1fc8b3b9a1e18e3b ", processorarchitecture ="x 86". See Help and Support for more information. HRESULT:0X800736FD
  
  remains frozen and finally claims iTunes has been installed properly.  Open iTunes generates an error indicating that Apple application support is not installed (Apple application support for mobile device support/Apple are not on the computer).  (Software update Apple Hello and Quicktime are there).
  I uninstalled programs that is fine, but try anything I can get itunes working.  I tried to install itunes 8.0, running on a different administrator, as an administrator user, stopping all programs from running and installation in offline.  I've read that it could be a problem with Microsoft Visual C++ 2005.  My computer shows redistributable Microsoft Visual C++ 2005 and Microsoft Visual C++ 2008 Redistributable - x 86 9.0.21022.218 on this subject.

  I tried to install the Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update file vcredist_x86.exe found at http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en#filelist
  but it freezes at around 100% completion.

  It is here where I am now.  My Windows updates were not fault and my system is up to date.  I don't know what to do as I need this program installed to be able to use my phone.

  I thank you for your time and assistance, you might be able to offer.

  -Daniel

  I reinstalled Windows 7.

  Good luck other people having the same problem.

• Cannot install this hardware. An error occurred during the installation of the device

  Can someone please HELP ME - I get the following error message: cannot install this hardware. An error occurred during the installation of the device. They system cannot find the specified file.

  I am not able to connect any hardware. It started all of a sudden. I can't connect my mouse so it before I'm not able to use my computer.  He did the same thing when I put in a USB key, there was the same error message.

  If something is damaged? How can I resolve this - pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
   
  I hope this helps.  Good luck.

• I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

  try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

  Hello. It worked for me:

  1. download and install 7 - zip;
  2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
  3. then double-click AppleApplicationSupport.msi and install;
  4 install everything except iTunes;
  5. install iTunes;
  5. it must be .

• An error occurred during the installation of Assembly component, cannot install MSXML 4.0 SP2

  Original title: error downloading MSXML 4.0 SP2

  I have trouble to install MSXML 4.0 SP2 Parser and SDK.  An error message appeared:
  An error occurred during the installation of assembly component
  {303994BA-6487-47AE-AF-1D-7AF6088EEBDB}.
  HRESULT: 0X800736FD.

  Hello

  1. What is the exact full error you get when you try to install MSXML 4.0 SP2?

  2 are you able to install other applications on your computer successfully?

  3. how you try to install the MSXML 4.0 SP2?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it from the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Step 1:

  You try to install MSXML 4.0 Service Pack 2 in the clean boot state. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Step 2:

  Check out the following link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13631

  See also:

  http://social.msdn.Microsoft.com/forums/en-CA/xmlandnetfx/thread/e7a63b76-63ec-47A9-86fa-7e7cdb2bc0a8

  http://support.Microsoft.com/kb/973688

  It will be useful.

• When installing itunes on Windows Vista Home Premium 64 bit I get an error saying an error occurred during the installation of assembly ' Microsoft.VC80.CRT, publicKeyToken...

  complete error message:

  An error occurred during the installation of assembly ' Microsoft.VC80.CRT, publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762" processorArchitecture = "x 86" '. " See Help and Support for more information. HRESULT: 0X8007010B. »

  Is there a possible solution

  I searched through almost every forum support on the internet and still have no solution. I still don't know what is the cause of the problem. Also when you try to update I can't with an error: error 8007010B. There may be a link

  Thank you

  Hello

  see if that helps the difficulty of updates:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  iTunes

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• An error occurred during the installation of microsoft install (MSI)

  Original title: an error occurred during the installation of microsoft install "during the installation of the Simulator professional siemens step 7.

  at the beginning of the installation process of professional Simulator of Siemens step 7 it told me to install MS for the installer; After agreeing to install it I have faced this problem as shown in the link

  http://Desmond.imageshack.us/Himg689/scaled.php?server=689&filename=13910106.jpg&RES=landing

  Hey Sheriff,

  -The program-specific question is?

  I would suggest trying the following steps and check if it helps.

  Method 1: Check if the Windows Installer Service is present and running on your computer.

  a. click Start , click RUN.

  b. in the run line, typeservices.msc and press to enter.

  c. find the Windows Installer Service.

  d. right-click on it and click on Properties.

  e. set Startup type to Automatic , and then Start the service.

  Try to install the software once again and check.   If the Windows Service install is not present or it cannot be started, then follow method 2.

  Method 2: Follow the steps in the Microsoft Article virtue and check following.

  "Windows Installer service could not be accessed" error when you try to add or remove a program in Windows XP or Windows Server 2003 http://support.Microsoft.com/kb/315346  

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  Let us know the results.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882