Cannot install my printer HP Photosmart c 4780

Similar Questions

• Cannot install driver printer for Photosmart C7180 All-in-Ohe

  It is a complicated mess.  My operating system is Vista Ultimate.  It started with a print job stuck in the queue.  When I did as indicated by a technician of HP, and I did not yet do not forget that I was told to do more, after a reboot, the print job is still stuck.  I spoke with another HP tech and finally, he told me that I need to uninstall the printer driver and reinstall.  It wouldn't reinstall, and I got the error message "HP Recovery to install plugin has stopped working".  Then I learned from another technology that the pilot was incompatible with IE8 and I had to uninstall IE8, install the printer driver, and then reinstall IE8.  After uninstalling IE8, it was still impossible to install the printer driver.  I got the message error "HP Installer preinstallateur updated plugin has stopped working".  Another technology, the fourth in the order, said it was a Microsoft problem.  I called Microsoft and got a tech who has done everything in his power to circumvent the problem and this is what I have, workaround.  I can print from my desktop via my laptop, that is shared over a network and who does not have the printer driver installed.   The technology of Microsoft told me it was a problem of HP.  How can I get the driver reinstalled on my desk?  I keep getting the error message "HP Installer preinstallateur plug-in update has stopped working," if I try to load the printer driver on the HP or my installation disc download site.  Any help would be most appreciated!  I don't want to buy another printer when this one worked very well except for a print job stuck in the queue!

  I am answering my own post!  Took a chance and bypassed the recommended installation and custom installation.  When the custom install window that is displayed, I selected all the elements and the printer driver installed!  Hooray.  Now I'm still wondering how to get a print job stuck out of the queue - he would not cancel.

  Thank you.

• Cannot install the printer HP Photosmart D110 series

  Original title: I'm unable to install my HP Photosmart D110 printer. I installed the driver from the disk and the internet and no luck... Help?

  I can't install my HP Photosmart D110 printer. It says I need to install a driver. Any suggestions?  I installed the driver from the disk and the internet and no luck... Help?

  Hello

  1. What is the nature of the connection between your computer and your printer (Wired/Wireless)?
  2. Did you change hardware/software on your computer before the show?
  3. Do you get any specific error message/code while trying to install the drivers?

  Method 1:

  Start the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Download the diagnostic tool and the drivers from the following link and check the status.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4023245&lang=en&cc=us&TaskID=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=4023244

  Method 4:

  If the problem persists after running all the methods mentioned above that I recommend you contact HP support b there by clicking on the link http://h20565.www2.hp.com/portal/site/hpsc?lang=en&cc=us&ac.admitted=1345301695197.876444892.492883150

  It could be useful!

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Cannot install my printer on my Asus laptop. I have the Hp OfficeJet 6400.

  Cannot install my printer on my Asus laptop. I have the Hp OfficeJet 6480 and an Asus X550C running Windows 8.1. After you download the software on the HP site, nothing happens after it downloads and deals with the extract. Disappears just from the installer. If I try to uninstall it, I get a message saying that it is running and that it cannot ininstall. I tried printing and scan doctor as well as the Installation Wizard. Also disabled firewall... nothing works

  It turned out to be a corrupted .dat file in the windows directory. Deleted it and problem solved!

  DW

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

• Installer doesn't seem to work properly. Cannot install driver printer and other items.

  Earlier this week, I got a virus.  That was resolved, however, my printer did not work properly, so I tried to update the driver hoping that would solve the problem.  I could not install the driver, even after spending most of the day chatting with hp support.  I got following messages is displayed:

  "Windows encountered a problem installing the software driver for your device."

  and

  "Cannot install the printer.  Impossible operation completed (error 0x000003eb). »

  I hope someone is able to help!

  Thank you.

  I'm all set... solved my problem of microsoft support... I shouldn't have wasted my time with hp!

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.